• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.8A
• /
• pp.950-961
• /
• 2004

In this paper, we measured and analyzed propagation characteristics in a subway tunnel that is recently increasingly becoming one of the radio communication environments. The measurements are carried out in a subway tunnel with frequency bands of 2.45㎓ and 5.8㎓. The length of tunnel we used for this study is 175m of LOS (Line-of-sight) and 270m of NLOS (Non Line-of-Sight). The subway tunnel is curved and its cross section is horseshoe type. The measurement systems we employ in this study are a narrow-band system and a wide-band system. The narrow-band system is used to get path loss measurement and the wide-band system is used to figure out delay profile measurement. In particular, the wide-band system consists of 1023 length PN sequence generator using a chip rate of 80MHz based on a sliding correlation technique. The omni-directional antennas and directional antennas are used to analyze propagation characteristics for beam type of antenna. The path loss displays only pure path loss of a tunnel environment. The delay profile indicates the mean excess delay and RMS (root mean square) delay spread.

• Journal of the Korean association of regional geographers
• /
• v.18 no.1
• /
• pp.17-26
• /
• 2012

In Hwangtohyun, meaning 'red soil pass', reddish surface mantles is widespread. Other granitic hills, exceptionally Naju and Youngam area, in Korean peninsula don't commonly have that color. This paper attempts to address this issue by CIA(chemical index of alteration). CIA data and A-CN-K diagram provide crucial insights into the changes in the relative contributions of chemical physical weathering in difference of grus regolith and saprolite. CaO and $Na_2O$ show strong depletion and $K_2O$ is progressive loss. In grus regolith, weathering trends are (sub)parallel to the CN-A join of the A-CN-K diagram, but the sample's composition plot ever closer to the A-K join in saprolite. The difference of weathering trend obtained using CIA data corresponds closely with the visual interpretation of soil color and texture.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.7 no.4
• /
• pp.736-742
• /
• 2003

This paper presents the propagation path loss in a tunnel which is a kinds of underground environments. To predict propagation path loss more accurately, we choose a straight tunnel with rectangular cross-section. The simulated receiver powers that are using a hybrid waveguide model and a Ray-Tracing method, are compared with the measured ones as a function of distance between TX and RX antennas in tunnel. The attenuation value of regression analysis for measured power in the tunnel is 0.0238dB/m which is similar to the one of the EH1.2 mode, 0.0246dB/m in hybrid waveguide model. By comparing simulation with measurement in tunnels, it has been shown that the measured values are approximate to the simulated results of ray-tracing model. In the analysis of wide-band channel characteristics of the tunnel, the more the distance between TX and RX antennas in tunnel increases, RMS delay spread increases and coherence bandwidth decreases.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.36 no.7
• /
• pp.689-695
• /
• 2012

The friction factor in a rod bundle and the loss coefficient at a spacer grid were examined. As a test section, 25 smooth rods, 9.5 mm in diameter and 2000 mm in length, were prepared and installed in a $5{\times}5$ square array in a square channel. In this case, the P/D (Pitch-to-Diameter ratio) was 1.35. In this work, plain (i.e., no mixing vanes), split-vane, and hybrid-vane spacer grids were tested. In a bare rod bundle (i.e., no spacer grid), the measured friction factors were in good agreement with the previous correlations. Among the spacer grids tested, the hybrid-vane spacer grid presented the largest friction factor in the rod bundle and loss coefficient. This may be because of the flow pattern change induced by large relative plugging of the flow cross section and mixing vane geometry. At Re=$5{\times}10^5$, the predicted loss coefficients of plain, splitvane, and hybrid-vane spacer grids were approximately 0.79, 0.80, and 0.88, respectively.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.25 no.11
• /
• pp.1183-1189
• /
• 2014

The accuracy of the resistive-sheet technique in calculating the RCS(Radar Cross Section) of a deciduous leaf is examined in this paper for various thicknesses and dielectric constants, and a range of thicknesses for the resistive sheet technique is proposed. At first, a leaf was assumed to be a lossy dielectric disk, and the dielectric disk was again assumed to be a resistive sheet with an appropriate resistivity for a given thickness, a dielectric constant, and a frequency. Then, the RCS of the leaf was computed using the physical optics(PO) method, and was compared with the calculation results of a numerical analysis: i.e., a commercial tool based on the FEM (Finite Element Method) technique. It was shown that the error increases as the thickness increases. The error was 0.1 dB, for example, when the thickness is 1.2 mm and 3.7 dB when the thickness is 3 mm with a dielectric constant of(21.4, 9.7) at 9.6 GHz. It was also found that the error decreases as the dielectric constant increases. This study will be very useful for calculating the scattering characteristics of numerous leaves in a vegetation canopy for estimating its radar backscatter using scattering model.

• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.922-923
• /
• 2011

비파괴 검사방법 중 자기누설 방법을 이용한 방법은 높은 자기 투자율을 갖고 있는 배관 검사에 적합하다. 자기누설 방식이 적용된 시스템을 MFL PIG라고 한다. MFL PIG는 금속 손실이나 부식과 같은 결함을 검출하는데 높은 성능을 보인다. 하지만 이 시스템은 축방향으로 자기장을 형성하여 투자율이 큰 금속 배관을 포화시켜 결함이 있는 부분에서 발생하는 누설자속을 검출하는 방식이기 때문에 축방향으로 발생하는 미소 결함은 자기장이 통과하는 단면이 작고 누설자속이 거의 없어 검출이 어렵다. 축방향 미소결함을 검출하기 위해 기존의 MFL PIG를 개선시킨 것이 CMFL PIG이며, 이것은 자기장을 원주방향으로 형성하여 결함에서의 자기 누설을 최대화 가능하다. 본 논문에서는 축방향 미소 결함의 검출이 가능한 CMFL 비파괴 검사 방법에 관한 논의와 이를 이용하여 축방향 결함의 위치이동에 따른 왜곡 신호의 분석 및 보정하는 방법에 관해 제안한다.

• The Proceedings of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.10 no.2
• /
• pp.71-77
• /
• 1996

The end-ring may contribute a significant influence to the performance of machine. The induced currents flow through the bars of a cage rotor and complete their closed paths by passing around the end-ring. This dissertation is to describe a method for calculating end-ring resistance of squirrel cage rotor, based on 3-D finite element method(A-$\Phi$). The resistance under consideration of skin effect is calculated by using Joule's loss equation.

• Proceedings of the Korean Society for Bio-Environment Control Conference
• /
• 2002.11a
• /
• pp.289-292
• /
• 2002

최근들어 파이프 골조의 온실 구조는 해마다 강풍이나 적설 둥으로 인한 파손으로 막대한 경제적 손실을 입고 있으며, 이러한 피해는 환경조절 및 자동화 설비의 설치에 직접적인 영향을 주는 중요한 요인이므로 시설의 구조역학적인 연구가 지속적으로 이루어져야 한다. 그러나 국내에서는 1990년대 초반 온실의 구조안전 및 구조설계 기준 설정, 자재의 규격화 및 표준화에 관한 연구가 일부 수행된 바 있으나, 파이프 골조의 온실은 구조물로서의 공학적 설계나 유지관리에 대한관심이 부족하여 시설의 구조역학적인 연구가 거의 이루어지고 있지 않는 실정이다. (중략)

• 제어로봇시스템학회:학술대회논문집
• /
• 1987.10b
• /
• pp.36-40
• /
• 1987

현재 사용되고 있는 작업방식은 로봇과 positioner의 상대적인 위치 및 자세설정에 의하여 작업효율 및 성능향상을 꾀할 수 있음에도 불구하고 비효율적인 방법으로 사용하고 있는 실정이다. 이러한 문제점을 해결하기 위한 방법중의 하나로 로보트와 positioner시스템을 하나의 기구학적 모델로 제어하는 방법이 제시된 바 있다. 상기의 연구에서는 로보트와 positioner(이하 R-P 시스템)간의 협조 제어가 여유자유도제어 방법을 이용하여 가능한 것임을 보였다. 그러나 용접작업과 같은 positioner 위에서의 연속경로 작업에 있어서는 작업공간과 특이성(singularity) 등에 관련된 여러 가지 문제점을 안고 있다. 특이성은 외부의 물리적인 제약이나 로보트의 기하학적 구조의 문제로 발생될 수도 있는데 이때 자유도의 손실을 유발하므로 임의의 원하는 방향으로 움직일 수 없게 된다. 이러한 면에서 R-P 시스템의 조작 성능 평가가 중요한 의미를 갖는다. 본 연구에서는 실제 산업현장에서 이용되고 있는 5 자유도를 갖는 수직 다관절형 로보트와 positioner에 대하여 협조 제어 방법을 검토한다. 그리고 작업공간 내의 조작성능평가를 위하여 Jacobian 행렬을 이용한 조작성지수를 위하여 Jacobian 행렬을 이용한 조작성지수를 도입하고 주어진 작업단면에 대한 이들의 분포를 등고선 그래프로 시각화 한다. 또한 조작성지수를 최대화 하는 알고리즘을 R-P 시스템에 적용하고 시뮬레이션을 통하여 그 타당성을 검토한다

• Journal of KSNVE
• /
• v.9 no.5
• /
• pp.914-921
• /
• 1999

There are many theoretical investigations to analyze higher order mode of reactive type single expansion chambers with offset inlet/outlet locations. But the conventional method has the restriction that the ratio between the area of inlet(or outlet) pipe and that of chamber must be natural number. In the paper, a new method was suggested to apply the Kim's method to silencer with circular cross-section. Not only the offset location but also the magnitude of cross-section area of inlet/outlet pipe can be considered by the suggested method. The predictions by this new method also compared with those by the finite element method and Munjal's method in order to verify the accuracy of the suggested method presented here.