• Title/Summary/Keyword: 손상모델식

Search Result 114, Processing Time 0.032 seconds

Estimation of Motion-Blur Parameters Based on Stochastic Peak-Trace Algorithm (확률적 극점자취방법을 통한 움직임열화가 발생한 영상에서의 파라메터 추출)

  • 최병철;강문기
    • Proceedings of the Korean Society of Broadcast Engineers Conference
    • /
    • 1999.11b
    • /
    • pp.99-104
    • /
    • 1999
  • 영상을 획득하는 과정에 있어, 영상획득 장치 또는 피사체의 흔들림으로 인해 발생되는 움직임 열화(motion-blur)현상은 영상의 선명도를 크게 떨어뜨리는 주된 원인이 된다. 손상된 영상은 그 영상자체로부터 움직임의 각도와 길이를 추출 함으로서 복원될 수 있다. 본 논문에서는 움직임 열화의 각도와 길이를 추정하기 위한 방법 중, 본 저자가 제안 했던 극점자취방법에, 확률적인 개념을 적용한 새로운 확률적 극점자취 방법을 소개한다. 기존의 방법은 신호지배영역이 올바로 지정되지 않았을 경우, 오차를 수반하기도 한다. 이러한 문제를 해결 하기 위해, 본 연구에서는 maximum likelihood(ML) 분류방법을 이용해 적절하지 않은 극점자취점의 영향을 선택적으로 작게 하여, 신호지배 영역의 설정 없이, 저주파 영역에서의 올른 극점자취의 검출이 가능하도록 하였다. 또한, Auto-regressive(Ah) 모델을 이용한 선형예측방법을 통해 극점 검출과정에서 불규칙하게 발생하는 특이점들이 극점으로 검출되지 못하도록 하여, 정밀한 움직임 방향의 추정이 가능하게 하였다. 또한, 움직임 길이의 검출에 있어서는, 노이즈에 의해 영향을 무시할 수 없는 기존의 영점교차점 방법을 보완한, 새로운 이동평균최소(MALM)법을 정의하였다 이 방법은 움직임 열화가 발생한 영상의 주파수 영역단면 패턴을 이용한 것으로서, 2차원적인 sinc함수를 1차원적인 표현으로 바꾸어주는 이동평균함수를 사용하여, 쉽게 부극점(sub-peak point)을 찾을 수 있도록 한다 부극점 또한 노이즈에 의한 영향을 받지 않고, 이동평균최소법 자체에 노이즈를 제거하는 과정에 포함되어있으므로. 이 방법을 사용하게 되면, 심한 노이즈 환경에서도 적절한 움직임의 길이 값을검출할 수 있다. 이렇게 얻어진 길이와 방향의 파라메터를 이용하여, 실제 실험에 사용된 손상되어진 영상을 효과적으로 복원할 수 있었다.>$\bigcirc$ 펄라이트 : 합섬A(비스코스+레이온)급액천의 유입은 소(1$\times$60cm)에서 21.8ml, 중(2$\times$60cm) 33.5ml, 대(3$\times$60cm) 43.4ml가 통과되었고 합섬(폴리에스텔)에서는 19.0~30.7ml로서 급액천의 규격에 따라 통과되는 차이가 있었다. 배지가 규격화되어 있어 급액천의 규격별로 일정하게 유입되었으며 급액천의 재질이 유입에 영향을 미친 것으로 사료되었다. (2) 급액관과 베드상과의 높이에 따른 유출양 : 급액과 베드상과의 낙차가 클수록 유출이 증가함을 알수 있었으나 합섬C(인견)실험구에서는 낙차가 유출에 영향을 미치지 않았다. (4) 급액된 양액의 EC 및 pH조사 : 급액된 양액의 EC 및 pH에 전혀 변화가 없어 재배 적응에 문제가 없을것으로 사료되었다.이가 가장 이상적인 것으로 생각된다.세포수에 대한 내부세포괴세포(ICM/total cells)가 20~40% 범주에 드는 비율은 처리구가 대조구보다 낮은 결과를 나타냈다. 결론적으로 돼지난포란을 이용하여 체외성숙을 유기할 때 효과적인 cysteamine의 농도는 50$\mu$M이 적당하며, 초기배발달을 유기할 때의 효과적인 cysteamine의 농도는 25~50$\mu$M인 것으로 판단된다.N)A(N)/N을 제시하였다(A(N)=N에 대한 A값). 위의 실험식을 사용하여 헝가리산 Zempleni 시료(15%$S_{XRD}$)의 기본입자분포로부터 %$S_{XRD}$를 계산한 결과, 16%$S_{XRD}$의 결과값을 얻을 수 있었다. 따라서, 본 연구에서 도출한 관계식들이 유효함을 확인할 수 있었다.계식들이 유효함을 확인할 수 있었다.할 때 약간의 증가를 나타냈다.". And

  • PDF

Development of Prediction Model of Frost Penetration Depth on Pavement in Korea (포장도로의 실측값을 활용한 한국형 동결깊이 예측모델 개발)

  • Hong, Seung-Seo;Kim, Young-Seok;Kim, Hak-Seung
    • Journal of the Korean Geosynthetics Society
    • /
    • v.9 no.3
    • /
    • pp.47-56
    • /
    • 2010
  • Korea is known to have seasonal frozen ground during a winter season due to climatic and ground conditions. Temperatures below $0^{\circ}C$ cause pavement failure by frost heaving and thaw settlement. A frost protection layer has been constructed in pavements to avoid damage caused by frost action. Anti-frost design methods in Korea have been adopted, which is established in U.S. and Japan. However the characteristics of soils in Korea are different and there are no reasonable modifications to accommodate these characteristics. Therefore, adequate pavement design procedures including seasonal frost action, as well as construction and maintenance practices are required. In this paper, the frost penetration depths along national roads in Korea are presented based on field measurement over several years (1991~2010). The frost penetration depths are analyzed with respect to the Provinces of Korea and sunny/shaded areas.

  • PDF

A Study on the Applications of the ACM(Area Capacity Method) for the Carbon-Fiber Composit Cylinder according to the Flaw Depth (복합재 용기의 손상에 따른 ACM기법 적용 연구)

  • Jang, Kap Man;Yim, Sang Sik;Kim, Young Gyu;Kim, Jeong Hwan
    • Journal of the Korean Institute of Gas
    • /
    • v.23 no.5
    • /
    • pp.1-7
    • /
    • 2019
  • Although the rupture pressure is evaluated from remaining strength when a flaw is defected to cylinder surface, but the rupture pressure can be not easy to estimate for the composite cylinders. In this study, the area capacity method is developed for the type-3 cylinders that is based on the result applied area capacity method of type-1 cylinders. And the reliability is validated by bursting test with artificial flaw at the cylinder surface. The predicted data of area capacity method and experimental results have very similar tendency. This method and results will be a very important records in field of rupture pressure estimations.

Cirsium japonicum var. maackii Protects Against Osteoarthritic Development by Cartilage Degradation (엉겅퀴의 연골 분해에 의한 골관절염 진행의 억제 효과)

  • Park, Chan Hum;Yang, Chang Yeol;Yang, Siyoung;Yokozawa, Takako;Shin, Yu Su
    • Proceedings of the Plant Resources Society of Korea Conference
    • /
    • 2019.10a
    • /
    • pp.93-93
    • /
    • 2019
  • 골관절염은 연골 파괴 및 연골 형성의 손상을 초래하는 산화 스트레스 세포사와 관련된 염증성 질환이다. 최근에, 엉겅퀴(Cirsium japonicum var. maackii)는 다양한 염증성 질환에 대하여 보호하는 역할을 하는 것으로 보고되었습니다. 그러나, 연골 퇴행 및 골관절염 진행에 대한 엉겅퀴의 역할은 아직 알려져 있지 않았다. 따라서, 본 연구는 골관절염 및 연골 분해 생쥐 모델에서 엉겅퀴의 보호 효과를 조사하였다. 먼저, 엉겅퀴의 활성 성분 함량을 측정하기 위해 총 폴리페놀 함량과 총 플라보노이드 함량 분석을 수행하였다. 그 결과, 건조된 엉겅퀴 지상부의 물 추출물에서 총 폴리페놀 함량은 $149.2{\pm}24.1mg\;GAE/g$ 및 총 플라보노이드 함량은 $27.9{\pm}2.0mg\;NE/g$을 함유하는 것으로 밝혀졌다. 또한, HPLC 분석으로부터 엉겅퀴 지상부 물 추출물의 주요 화합물은 플라보노이드 계열인 cirsimarin과 cirsimaritin으로 확인되었다. 또한, 엉겅퀴 추출물은 조직 병리학적 분석에 의해 입증된 내측 반월판의 불안정화에 의해 유도된 골관절염 마우스 모델에서 연골파괴 억제효과를 나타냈다. 결론적으로, 본 연구결과는 엉겅퀴 추출물이 골관절염과 연골 파괴를 개선 또는 예방할 수 있는 새로운 식 의약 소재로의 개발 가능성을 제시한다.

  • PDF

분무진공동결건조기 개발

  • Ryu, Gyeong-Ha;Ban, Byeong-Min;Kim, Jae-Hyeong;Son, Sang-Ho
    • Proceedings of the Korean Vacuum Society Conference
    • /
    • 2013.02a
    • /
    • pp.258-258
    • /
    • 2013
  • 최근 건조 제품의 양질화, 고급화 및 편의화가 요구되어 이를 충족시키기 위한 새로운 건조방법이 계속 개발 되어 왔다. 이러한 방법들 중에서 저온과 진공하에서 건조가 이루어지는 진공 동결 건조는 가장 완벽한 건조 방법으로 최근 실용화 되고 있다. 진공동결건조란 건조의 한 종류로 수분을 함유한 시료를 동결시킨 후 진공펌프를 이용하여 수증기압을 3중점 이하로 낮추어 얼음을 직접 증기로 만드는 승화의 원리에 의해서 얻어진다. 분무진공동결건조의 특징은 (1) 물리적구조의 보존성, (2) 화학적인 안정성, (3) 생물학적인 활동의 보존성, (4) 제품의 높은 복원성 및 재생성이다. 따라서 분무진공동결건조 기술은 크게 진공, 분무, 동결, 건조, 멸균 등과 같은 요소기술의 복합기술이라 할 수 있다. 분말을 제조하기 위해서 진공동결건조 후 분쇄하는 방법을 사용하나 본 방법에서는 정밀화학품 제조를 위해서 분무진공동결건조 방식을 사용한다. 이를 통하여 적당한 크기인 5~10 um의 입경 제조가 가능하고, 공기동력학적인 입경이 기존 방식에 비해 작아서 허파까지의 운반효율이 1.5~2배 우수하다. 화학, 의학 분야에서의 분무동결 건조는 주로 민감한 제품, 즉 생물학적 고유성의 손상 없이 물을 제거하는데 사용되어 영구적으로 저장 가능한 상태로 보관할 수 있으며 물의 첨가로 원상태로 복구할 수 있어서 매우 각광을 받고 있다. 의약용 냉동건조 제품은 항생물질, 박테리아, 혈청, 백신, 검사 약물, 단백질을 포함하는 생물공학 제품들, 세포, 섬유, 화학제품 등이 있으며 주로 vial 또는 ampule 상태로 건조가 이루어진다.본 연구에서는 원료를 $-194^{\circ}C$의 액체질소에 분무시켜 동결된 미립자를 형성한 후 진공 및 저온상태에서얼음의 승화(sublimation)에 기반한 1차 건조와 수증기 탈착(desorption)에 기초한 2차 건조 과정으로 구성된 분무진공동결건조기를 개발하였다. 분무동결 과정의 해석을 통해 2유체식 노즐을 통해 분무된 미세 입경의 액적이 액체 질소 표면까지 도달하는 회수률, 분무 노즐의 위치, 운전 조건 및 용기의 설계의 최적화를 수행하였다. 초기 액적속도, 분무노즐의 높이, 흡입구 추가에 따른 액적 유동 및 회수의 특성을 제시하였으며 이를 통한 분사시스템 고도화 가능성을 제시하였다. 구형의 미세 입자가 적층된 제품의 동결건조 공정의 해석은 흡착승화 모델(sorption sublimation model)을 기반으로 다음과 같은 열전달, 물질전달, 상변화 모델을 고려하여 유도되었다. 분무노즐 및 냉동/진공 배기계 시작품을 개발하여, 표면의 고다공도를 갖춘 입경 3~20 m 정도의 시료를 얻을 수 있으며, 동역학적 입경 5 m 충족함을 확인하였다.

  • PDF

Damage Study on the Mechanical Fastening in Laminated Composites (복합적층판(復合積層板)의 기계적(機械的) 체결부(締結部)에 관한 파손연구(破損硏究))

  • Kwan-Hyung,Song
    • Bulletin of the Society of Naval Architects of Korea
    • /
    • v.27 no.4
    • /
    • pp.58-66
    • /
    • 1990
  • A series of test was performed measuring the failure strength and failure mode of Gr/Pi, $[0^{\circ}/45^{\circ}/90^{\circ}/-45^{\circ}]_s$ laminate containing a single pin loaded hole. The finite element method is applied to calculate the stress distribution in the laminates, then the failure load and the failure mode were predicted by means of the characteristic length. 12 different geometric variations were developed to analyze the effects of the ratio of specimen width to hole diameter (W/d) and ratio of edge distance to hole diameter (L/d). X-Ray of NDE methods were utilized in finding out the initial defects, damage and the fracture mechanism, and SEM(Scanning Electron Microscopes) was used the evaluation of the fracture mechanism and crack propagation around hole under tension pin loading. $[0^{\circ}/45^{\circ}/90^{\circ}/-45^{\circ}]_s$ laminate are found to be most sensitive to W/d but not so influenced by L/d. The failure mode and tensile strength predicted by the model show agreement with experiment data for pin loading bolted jointed test except range of $L/d{\leqq}3$.

  • PDF

The apoptotic fragment assay in rat peripheral lymphocytes and crypt cells with whole body irradiation with 60Co ϒ-rays and 50 MeV cyclotron fast neutrons (코발트-60 감마선과 50 MeV 싸이크로트론 고속 중성자선에 전신조사된 랫드의 말초 임파구와 음와 세포의 아포토시스 유도를 이용한 생물학적 선량 측정 모델 개발 연구)

  • Kim, Tae-hwan
    • Korean Journal of Veterinary Research
    • /
    • v.41 no.2
    • /
    • pp.203-210
    • /
    • 2001
  • Here, we compared the effectiveness of 50 MeV($p{\to}RBe^+$) cyclotron fast neutrons versus $^{60}Co$ ${\gamma}$-rays by the apoptotic fragment frequency in both rat peripheral lymphocytes and crypt cells to check a radiobiological endpoint. The incidence of apoptotic cell death was increased in all irradiated groups, and radiation at all doses trigger rapid changes in both crypt cells and peripheral lymphocytes. These data suggest that apoptosis may play an important role in homeostasis of damaged radiosensitive target organ by removing damaged cells. The curve of dose-effect relationship for these data of apoptotic fragments frequencies was $y=0.3+(6.512{\pm}0.279)D(r^2=0.975)$ after neutrons, while $y=0.3+(4.435{\pm}0.473)D+(-1.300{\pm}0.551)D^2(r^2=0.988)$ after ${\gamma}$-rays. In addition, $y=3.5+(118.410{\pm}10.325)D+(-33.548{\pm}12.023)D^2(r^2=0.992)$ after ${\gamma}$-rays in rat lymphocytes. A significant dose-response relationship was found between the frequency of apoptotic cell and dose. These data show a trend towards increase of the numbers of apoptotic cells with increasing dose. Dose-response curves for high and low linear energy transfer (LET) radiation modalities in these studies were different. The relative biological effectiveness (RBE) value for crypt cells was 1.919. In addition, there were significant peaks on apoptosis induction at 4 and 6h after irradiation, and the morphological findings of the irradiated groups were typical apoptotic fragments in crypt cells that were hardly observed in the control group. Thus, apoptosis induction in both crypt cells and peripheral lymphocytes could be a useful endpoint of rat model for studying screening test and microdosimetic indicator to evaluate the biological effects of radiation-induced cell damage.

  • PDF

Two-Dimensional Numerical Simulation of GaAs MESFET Using Control Volume Formulation Method (Control Volume Formulation Method를 사용한 GaAs MESFET의 2차원 수치해석)

  • Son, Sang-Hee;Park, Kwang-Mean;Park, Hyung-Moo;Kim, Han-Gu;Kim, Hyeong-Rae;Park, Jang-Woo;Kwack, Kae-Dal
    • Journal of the Korean Institute of Telematics and Electronics
    • /
    • v.26 no.1
    • /
    • pp.48-61
    • /
    • 1989
  • In this paper, two-dimensional numerical simulation of GaAs MESFFT with 0.7${\mu}m$ gate length is perfomed. Drift-diffusion model which consider that mobility is a function of local electric field, is used. As a discretization method, instead of FDM (finite difference method) and FEM (finite element method), the Control-Volume Formulation (CVF) is used and as a numerical scheme current hybrid scheme or upwind scheme is replaced by power-law scheme which is very approximate to exponential scheme. In the process of numerical analysis, Peclet number which represents the velocity ratio of drift and diffusion, is introduced. And using this concept a current equation which consider numerical scheme at the interface of control volume, is proposed. The I-V characteristics using the model and numerical method has a good agreement with that of previous paper by others. Therefore, it is confined that it may be useful as a simulator for GaAs MESFET. Besides I-V characteristics, the mechanism of both velocity saturation in drift-diffusion model is described from the view of velocity and electric field distribution at the bottom of the channel. In addition, the relationship between the mechanism and position of dipole and drain current, are described.

  • PDF

Prediction Model of Endurance Time to Isotonic Contraction Exercise for Biceps Brachii using Multiple Regression Analysis with Personal Factors and Anthropometric Data (신체측정치수를 적용하여 다중회귀 분석을 통한 위팔두갈래근 등장성 운동의 근지구력시간 예측모델 연구)

  • Jeong, Ju-Young;Lee, Sang-Sik
    • The Journal of Korea Institute of Information, Electronics, and Communication Technology
    • /
    • v.8 no.2
    • /
    • pp.178-186
    • /
    • 2015
  • Endurance time is very important indicator to estimate muscle fatigue. In the case of measuring endurance time directly, it is dangerous for subject to perform a test until the point of failure to main time force. Therefore, this paper presents the model to estimate endirance time using indirect measurements such as personal factors and anthropometrical data. Previous studies had shown that personal factors such as gender and age were not related to endurance time, but recently studies have shown that it is estimated by using independent variable or predictor such as GTA (Gravitational Torque of the horizontal, stretched arm) and MVC (Maximum Voluntary Contraction). The present study investigated variables to estimate endurance time using personal factors and anthrometrical data during isotonic contractions. Twenty five healthy subject volunteered for this study, and performed three test sessions of isotonic contraction exercises at 10~50% respectively. Afterward the correlation coefficient and p-values were compared among regression models using personal factors and anthropometrical data. The results demonstrated that multi-regression model had significant coefficient of correlation, and was useful estimate endurance time.

Effects of black onion vinegar on high fat diet-induced obese C57BL/6 mice model (흑양파를 이용하여 제조한 식초의 고지방식이 유도 C57BL/6 비만 동물모델에 미치는 효과)

  • Mi Suk Kim;Ji Yun Baek;Ye Jung Choi;Ki Sung Kang;Weon Taek Seo;Ji Hyun Kim;Hyun Young Kim
    • Journal of Applied Biological Chemistry
    • /
    • v.65 no.4
    • /
    • pp.313-319
    • /
    • 2022
  • Consumption of high fat diet (HFD) induces obesity by accumulating triglycerides and inflammation in the body. In the present study, we investigated the effects of black onion vinegar (BV) on HFD-induced C57BL/6 obese mice model. The HFD-fed obese mice were administered black onion juice (BJ) and BV, respectively, for 6 weeks. The HFD-fed group increased body and organ weights compared with normal control diet-induced group. However, administration of BV significantly reduced body and organ weights compared with HFD-fed group. The BJ- and BV-administered groups improved the serum lipid profiles such as total cholesterol and triglyceride, compared with HFD-fed group. In addition, BV-administered group significantly improved serum high-density lipoprotein cholesterol and low-density lipoprotein cholesterol. The BV-administered mice had increased the number and size of adipose cells in the liver and adipose tissues. The administrations of BJ and BV significantly down-regulated adipogenesis transcription factors and proinflammatory proteins in the liver compared with HFD-fed group. In particular, BV-administered group showed stronger attenuation of adipogenesis-related proteins than the BJ-administered group. Therefore, this study demonstrated that administration of BV attenuated HFD-induced obesity, in particular down-regulation of adipogenesis, and it could be developed as a functional vinegar for anti-obesity.