• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.37 no.4
• /
• pp.387-394
• /
• 2013

Hydrogen-compressed natural gas (HCNG) blend has attracted attention as a fuel that can reduce $CO_2$ emissions because it has low carbon content and burns efficiently. An increase in the compression ratio of HCNG engines was considered as one of the methods to improve their efficiency and reduce $CO_2$ emissions. However, a high combustion rate and flame temperature cause abnormal combustion such as pre-ignition or knocks, which in turn can cause damage to the engine components and decrease the engine power. In this study, the performance and knock characteristics with a change in the compression ratio of an HCNG engine were analyzed. The combustion characteristics of HCNG fuel were evaluated as a function of the excess air ratio using a conventional CNG engine. The effects of the compression ratio on the engine performance were evaluated through the same experimental procedures.

• Journal of Navigation and Port Research
• /
• v.36 no.1
• /
• pp.15-20
• /
• 2012

In order to investigate the maneuverability of tug-barge, sea trial tests such as speed, acceleration/deceleration, $10^{\circ}$ turning, $20^{\circ}$ turning, $10^{\circ}/10^{\circ}$ zigzag and $20^{\circ}/20^{\circ}$ zigzag were conducted with both tug and tug-barge. From the result of turning test, longer tactical diameter and lower rate of turn of tug-barge than those of tug are obtained. From the result of the zigzag test, bigger overshoot angle of tug-barge than that of tug is obtained. When they turned or changed a course, it showed that the barge turned inner side of the trajectory of tug. For the safe navigation, the helmsman of tug-barge should be aware of these maneuvering characteristics.

• Journal of IKEEE
• /
• v.26 no.2
• /
• pp.249-256
• /
• 2022

The prosthetic leg is a device that performs walking instead of a amputated lower limb, and require a change in locomotion mode by providing the user's intention to respond to a discontinuous locomotion environment. Research has been conducted to detect the users' intentions through biomechanical features inside the socket that directly contacts the cut site in demand for natural locomotion mode changes without external control equipment. However, there is still a need for a sensor system that is suitable for the internal environment of the main body and socket of the cut site. Accordingly, this paper proposed a film-type sensor system that is suitable for the main body characteristics of the cut site, is not affected by the temperature and humidity conditions inside the socket, and is easy to manufacture in various sizes. The proposed sensor is manufactured base on Velostat film and takes into account the pressure measurement characteristics that vary with size. Through the experiment, the change in the internal pressure of the socket due to the intentional posture performance of the wearer was measured, and the possibility of detecting the intention to change the locomotion mode was confirmed.

• Proceedings of the Plant Resources Society of Korea Conference
• /
• 2021.04a
• /
• pp.31-31
• /
• 2021

본 연구는 서부 DMZ 및 접경지역에 속하고 인천광역시 강화군 강화읍에 위치한 퇴모·혈구산(466m) 을 대상으로 수행되었다. 강화군은 우리나라에서 4번째로 넓은 면적의 섬으로 알려져있고, 인천광역시 서북부 경기만의 한강 하구에 위치하고 있으며, 서쪽으로는 석모도 등 부속섬과 서해안, 북쪽으로는 북 한의 황해도 연백시, 동쪽으로는 김포시와 강화대교와 강화초지대교가 육지로 연결되어 있다. 2019년 4 월부터 2020년 10월까지 7회에 걸쳐 계절별로 식물상 조사를 진행하였다. 본 연구에서 확인된 해명산 일대에 분포하는 관속식물의 현황은 92과 257속 353속 4아종 41변종 4품종 총 402분류군으로 확인되었다. 양치식물은 6과 9속 10종 2변종 12분류군, 나자식물은 3과 4속 8종 총 8분류군, 쌍자엽식물은 74과 198속 268종 4아종 30변종 3품종 등 305분류군, 단자엽식물은 9과 46속 67종 9변종 1품종 등 77분류군으로 조사되었다. 또한, 식물구계학적 특정식물 IV급은 등 1분류군, III급은 물박달나무, 병아리꽃나무 등 6분 류군, II급은 갯장구채, 꼬리조팝나무 등 8분류군, I급은 야산고비, 일엽초 등 20분류군으로 파악되었 다. 희귀식물은 산림청 지정 희귀식물 취약종(VU)에 속하는 산들깨와 약관심종(LC)에 속하는 쥐방울덩굴 등 총 2분류군이 확인되었다. 특산식물은 백운산원추리 및 병꽃나무 등 4분류이 파악되었다. 침입외래식물은 애기수영 및 유럽점나무도물 등 39분류군으로 확인되었고, 생태계교란식은 가시박 등 4분류군으로 파악되었다. 주변의 신산저수지 및 고비고개에 큰 공사가 진행되고있어 침입외래식물의 개체수는 크게 증가할 것으로 예측었다. 따라서 장기적인 생태계 보전대책 수립이 필요하다고 판단된다.

• Journal of the Korea Concrete Institute
• /
• v.27 no.4
• /
• pp.363-375
• /
• 2015

This research investigated the effects of diameter and material of energy frame on the impact velocity or strain rate of Strain Energy Frame Impact Machine (SEFIM). The impact speed of SEFIM have been clearly affected by changing the diameter and material of the energy frame. The reduced diameter of the energy frame clearly increased the impact velocity owing to the higher strain at the moment of coupler breakage. And, titanium alloy energy frame produced the fastest speed of impact among three materials including steel, aluminum and titanium alloys because titanium alloy has faster wave velocity than steel. But, aluminium energy frame was broken during impact tests. In addition, the tensile stress versus strain response of high performance fiber reinforced cementitious composites at higher and wider strain rates between 10 and 72 /sec was successfully obtained by using four different energy frames.

• Korean Journal of Ichthyology
• /
• v.21 no.1
• /
• pp.55-60
• /
• 2009

Korean bitterling Acanthorhodeus gracilis Regan, 1908 is very similar to Acheilognathus chankaensis (Dybowski, 1872) having 12~14 dorsal fin rays, 10~11 anal fin rays and 35~36 lateral line scales. By analyzing these specimens and original descriptions, diagnostic characteristics of the genus Acanthorhodeus were included in the genus Acheilognathus and Acanthorhodeus gracilis was defined as a junior synonym of Acheilognathus chankaensis. The provisional keys are provided for identifying the nine species of Acheilognathus from Korea.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2017.05a
• /
• pp.1115-1121
• /
• 2017

In order to obtain high thrust at the beginning of the flight, the solid rocket motor with large initial burning surface area was designed and tested. From the static firing test, lower initial thrust was obtained compared with the expected thrust based on the internal ballistic prediction due to the negative erosive burning effect which reduced the burning rate estimated by APN Law. In addition, the radial mode combustion instability was observed with 8 fins grain configuration. This instability was removed after the odd number of fins were used.

• Korean Journal of Plant Taxonomy
• /
• v.39 no.2
• /
• pp.80-85
• /
• 2009

Three Korean Broussonetia species (Moraceae) were reexamined based on morphological characters. The plants which has been used for making traditional paper Hanji in Korea are considered hybrid species between B. kazinoki and B. papyrifera, its natural habitat was firstly discovered in Is. Gageo (Jeonnam Province). Thus it is newly described as B. ${\times}$ hanjiana M. Kim. Its Korean name is changed into Daknamu instead of Kkujidaknamu. Therefore, Korean name for B. kazinoki is also changed into Aegidaknamu instead of Daknamu. Dioecious plants of Broussonetia kazinoki which were found in Is. Gageo are named as B. kazinoki for. koreana M. Kim (Gageo-Aegidaknamu).

• Korean journal of applied entomology
• /
• v.58 no.1
• /
• pp.63-68
• /
• 2019

Three species of Epipleminae: Europlema nubifasciaria (Leech), Dysaethria meridiana (Inoue), and Phazaca theclata ($Guen{\acute{e}}e$), are reported for the first time from Korea. Europlema leleji Sinev turns out to be a new synonym of Epiplema nubifasciaria Leech and the latter is newly combined to the genus Europlema. Its female genitalia are first described. This is the first record of Europlema for the Korean fauna. Photos of adults and genitalia are provided for the treated species.

• The Journal of the Convergence on Culture Technology
• /
• v.4 no.4
• /
• pp.309-316
• /
• 2018

In this study, we propose a 3D virtual reality based presentation training system to help implement the virtual presentation environment, such as the real world, to present it confidently in the real world. The proposed system provided a realistic and highly engaging presentation and interview environment by analyzing the speakers' voice and behavior in real time to be reflected in the audience of the virtual space. Using HMD and VR Controller that become 6DOF Tracking, the presenter can change the timing and interaction of the virtual space using Kinect, and the virtual space can be changed to various settings set by the user. The presenter will look at presentation files and scripts displayed in separate views within the virtual space to understand the content and master the presentation.