• Proceedings of the KIEE Conference
• /
• 2003.04a
• /
• pp.149-153
• /
• 2003

AC 부하를 갖는 동기전동기에 있어서, 동기전동기의 속도리플을 저감시키기 위한 문제를 풀기위해 3가지 제어기법에 대해 비교를 한 후 가장 강인한 제어기법에 대해 분석하였다. AC 부하를 갖는 특별한 제어 대상으로 엑스선 전산화 단층촬영 장치(CT)용 겐트리를 선정하였으며 시스템이 갖는 특별한 구조에 의해 이러한 시스템 특성을 갖는다. 동기전동기의 출력 축에 링(Fing) 모양의 원판 프레임을 갖으며, 이 원판 표면에 무게가 서로 다른 여러 장치(X_선 튜브, X-선 검출기, 고압발생장치, DAS 장치, 온도조절장치 등)를 부착하여 영상 획득 시스템의 회전부를 구축하기 때문이다. 이러한 시스템에서는 무게 평형을 갖지 못하는 편심 무게가 존재하게 되며 이로써 전동기 관점에서는 AC 부하처럼 인식되는 제어 조건으로 인식 될 수 있다. AC 부하를 갖는 동기전동기에 대해 일반적인 벡터제어 알고리즘으로 제어를 수행하면 정상상태에서도 속도 오차가 "0" 으로 줄어들지 않고 AC 형태의 오차 성분이 존재하며 편심 무게의 크기에 비례하여 진폭이 커지는 특성을 갖는다. 이러한 문제점을 해결하기 위하여 Sine파 보상전류를 갖는 속도제어기법, 펀심부하토크 관측기를 이용한 속도제어기법, 그리고 기준모델제어기법을 소개하였다. 각 방법에 대한 실험 결과로부터 편심무게의 변동과 편심 위치의 변동 조건에서 기준모델제어기법이 강인한 제어 특성과 리플저감 측면에서 가장 우수함을 검증하였다. 이로써 AC 부하 조건에서 고정도 속도 제어기가 요구되는 경우 좋은 선택의 지침이 될 수 있다고 본다.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.10 no.1
• /
• pp.16-26
• /
• 2011

Variable speed limit(VSL) is one of the highway ITS techniques designed to prevent accidents and traffic slow down by reducing congestion or speed variation between vehicles and lanes prior to arrive at the accident location by limiting speed. In Korea, while people have recognized the need for variable speed limit beginning with Seoul's urban expressway and installed facilities in order to provide guide for speed limit per lane and lane use, there has not been enough development of algorithm for internal administration as well as research on the basic principles behind administering variable speed limit. This study is for modeling and evaluating the VSL strategies based on the traffic flow theory. Supply-Demand method of the Cell Transmission Model is applied to demonstrate the traffic features and shockwaves to upstream of the bottleneck with/without VSL. We verified the explanation of Cell Transmission Model for the numerical example. and as the result, it is found that VSL strategies can reduce the total travel time in the congested section and variation of the speed. It means VSL is useful to improve the traffic condition and the safety on highway

• The Journal of the Korea institute of electronic communication sciences
• /
• v.16 no.3
• /
• pp.503-510
• /
• 2021

This study intends to apply the mathematical method of fractional order differentiation to a controller that controls the response of the system. Therefore, we design integrator for the fractional index by converting it into discrete time to construct a controller. The IP controller composes an integral controller for errors and the proportional controller applies only the system output. The controller is designed by using the fractional order integrator to the integral controller of the IP controller. First, the performance of the PI controller and the IP controller is compared, and the designed controller is applied to the speed control of the motor. As a result, the motor output speed was uniformed and precise control performance could be obtained. It was confirmed that the speed error in the steady state is within 0.1 [%], and it has precise and uniform speed control performance without overshoot.

• Proceedings of the KIEE Conference
• /
• 2003.07b
• /
• pp.1117-1119
• /
• 2003

기존의 사다리꼴형 브러시리스 직류 전동기(BLDCM)의 센서리스 제어는 전류전환 시점을 알기 위하여 홀 센서 대신 단자 전압과 중성점 전압을 이용한다. 하지만, 속도 제어를 위해서는 엔코더나 레졸바와 같은 센서를 사용해야한다. 2극기 BLDC 모터의 경우 단자전압을 이용한 위치정보는 모터 한 회전 당 12번의 신호가 출력된다. 엔코더 혹은 레졸바를 제거하고, 이 신호를 이용하여 속도 정보를 만들 경우, 속도를 만들기 위한 위치 정보의 펄스 간격이 넓게 되어 순시 속도를 만들지 못하게 된다. 이로 인하여 실제 속도의 변화를 민감하게 추정하지 못하게 된다. 따라서 이렇게 만들어진 속도 정보는 실제 시스템에서 사용할 수 없게 된다. 이러한 문제를 해결하려고 본 논문에서는 순시 속도 관측기를 사용한다 단자전압과 중성점 전압에 의한 위치정보를 가지고 순시 속도 관측기를 속도 제어 주기보다 빠르게 갱신함으로써 순시 속도를 예측한다. 또한 이 순시 속도는 속도 제어기로 피드백 되어 속도 센서리스를 실현한다. 이에 대한 타당성은 시뮬레이션을 통해 검증한다.

• Journal of IKEEE
• /
• v.2 no.2 s.3
• /
• pp.166-172
• /
• 1998

Switched reluctance motor(SRM) has the advantages of simple structure, low rotor inertia and high efficiency. However, position sensor is essential in SRM in order to synchronize the phase excitation to the rotor Position. The Position sensors increase the cost of drive system and tend to reduce system reliability. This paper investigates the speed control of sensorless SRM in which the Phase current and change rate are utilized in position decision, and the period of dwell angle is variable for speed control. The proposed system consists of Position decision circuit, speed controller, digital logic commutator, switching angle controller and inverter The performances in the proposed system are verified through the experiment.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.15 no.5
• /
• pp.343-351
• /
• 2010

This paper proposes a new fuzzy speed controller based on the Takagi-Sugeno fuzzy method to achieve a robust speed control of a permanent magnet synchronous motor (PMSM). The proposed controller requires the information of the load torque, so the second-order load torque observer is used to estimate it. The LMI condition is derived for the existence of the proposed fuzzy speed controller, and the gains of the controller are provided. It is proven that the augmented control system including the fuzzy speed controller and the load torque observer is exponentially stable. To evaluate the performance of the proposed fuzzy speed controller, the simulation and experimental results are presented under motor parameter variations. Finally, it is clearly verified that the proposed control method can accurately control the speed of a permanent magnet synchronous motor.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.13 no.3
• /
• pp.93-100
• /
• 1999

Wide operating range and speed control is needed for wind power generating and a Doubly Fed Induction Generator(DFlG) has good adaptivity for that purpose. Ths paper investigates speed and output stator power control using a grid connected to a DFlG in super-synchronous speed regions, by control of both magnitude and frequency of the voltage fed to the rotor. For the speed control analysis, torque simulation is perforrred whereby the different slip between qJernting rmtor driving frequency and synchronous frequency of M-G system awlied. To keep the output rating of the generator, the exciting frequency and voltage attenuation are arolied.rolied.

• Journal of the Korean Society for Railway
• /
• v.15 no.1
• /
• pp.37-41
• /
• 2012

Kyung-Bu High Speed Railway is operated in train control system(tcs) of fixed block operated in a way of dividing track circuits into several blocks in accordance with operation circumstances such as rolling stocks, grade, curves and facilities. The TCS of fixed block system refers to a continuous train control system, which transfers operational information such as entry and exit speed, distance-to-go, and deceleration etc. into on-board train control equipment on the basis of block occupancy of a preceding train. It guarantees a safe operation of trains by giving an emergency braking order, in case that a train exceeds an entry and exit speed of a corresponding block. In this paper, we analyze the speed control code deducing in accordance with maximum operation speed and characteristics of rolling stocks by analyzing principles of generation of speed control code allocated in blocks for safe operation, then train operational efficiency was analyzed by means of analysis of operation headway in accordance with the deduced speed control code. This study will be used to design in case of getting an increase in speed for existing high speed line or new high speed line TCS.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.20 no.7
• /
• pp.65-73
• /
• 2006

This paper presents speed control of IPMSM drive using neural network(NN) PI controller. In general, PI controller in computer numerically controlled machine process fixed gain. They may perform well under some operating conditions, but not all. To increase the robustness of fixed gain PI controller, NNPI controller proposes a new method based neural network. NNPI controller is developed to minimize overshoot rise time and settling time following sudden parameter changes such as speed, load torque and inertia. Also, this paper is proposed speed control of IPMSM using neural network and estimation of speed using artificial neural network(ANN) controller. The back propagation neural network technique is used to provide a real time adaptive estimation of the motor speed. The results on a speed controller of IPMSM are presented to show the effectiveness of the proposed gain tuner. And this controller is better than the fixed gains one in terms of robustness, even under great variations of operating conditions and load disturbance.

• 전기의세계
• /
• v.31 no.10
• /
• pp.675-680
• /
• 1982

전동기제어시스템은, thyristor의 개발로 펄스폭변 조형인버터와 같은 switching기능을 내포한 전원장치의 적용으로, 정류기구가 기계적접점형식에서 전기적 무접점화되어 대체되는 추세에 있어, 속도조정방식도 바꾸어져야 하게 되었다. TRANSVEKTOR제어를 적용한 자계Orientation 방식은, 이러한 관점으로 볼 때, 근원적으로 교류전동기의 속도조정기능을 실용화하는데는 가장 효과적인 방식이라고 볼 수 있다. 더욱이 제지공장 및 직물공장등 폐회로 제어운전을 하는 공정의 전동력기구에서는, 현재 활발히 개발되고 있는 전자계산조직의 활용으로, 종래 직류전동기로서의 Leonard방식의 속도제어를 하는 것에 비하여, 속응성, 신뢰성 및 그 정도에 있어서 월등하게 우수한 기능을 가진 전동기제어시스템의 실용화가 가능하게 되었다.