• Korean Journal of Food Science and Technology
• /
• v.19 no.2
• /
• pp.125-128
• /
• 1987

Water uptake rates of barley (pressed, cutted and pearled) at $20^{\circ}C{\sim}50^{\circ}C$ were determined by measuring the weight gain during soaking. Pressed barley absorbed water at the fastest rate, whereas pearled barley at the slowest rate. The former was the most temperature dependent during hydration. Degree of gelatinization, determined by X-ray diffractometry, during cooking at $100^{\circ}C$ indicated that the pressed barley cooked 1.4- and 2-times faster than Gutted and pearled barley, respectively.

• Korean Journal of Materials Research
• /
• v.5 no.3
• /
• pp.379-386
• /
• 1995

LiOH-$H_{3}$BO_{3}$ 용액중에서의 Zircaloy-4 핵연료 피복관의 부식가속과 억제현상을 조사하고 이러한 부식특성에 미치는 Li 및 B의 영향을 해석하기 위하여, 여러 조건의 LiOH-$H_{3}$BO_{3}$ 용액을 사용하여 35$0^{\circ}C$, 165bar의 고온, 고압 조건에서 Zircaloy-4 피복관의 노외 부식시험을 수행하였다. 원전 수화학 모의조건에 대응되는 용액 중에서의 부식속도의 천이는 물 분위기에서 보다 빨리 발생되고 천이후 물 분위기와 거의 유사한 부식속도를 나타내는 천이적 후의 부식거동을 보였다. 한편 pH의 변화는 부식특성에 큰 영향을 미치지 않았다. 부식가속과 억제 모의실험으로부터, 산화막내로 침투하는 Li의 양이 용액중 Li 농도에 크게 의존하며, Li 농도가 일정하게 정해진 용액의 경우 B 첨가에 관계없이 산화막내에 일정량의 Li이 농축될수 있다는 가정을 제시하였다. 또한 B 첨가에 의한 부식억제가 B 또는 B-(OH) 화합물의 산화막내 Li 침투 억제에 의한 것이 아니라 일들에 의해 산화막내로 산화성 성분의 이동이 억제되는데 기인할 수 있음을 제시하였다. 부식가속 개시점에 대응되는 산화막 두께측정 결과와 용액내 Li 농도간의 관계로부터, 용액중 Li 농도가 높을수록 부식가속이 얇은 산화막 두께에서 시작됨을 알았다. 특히 노내조건에서의 핵연료 피복관의 부식가속이 산화막내 Li 농축에 의해 일어나는 부식특성으로 해석될 수 있음을 보였다.

• Journal of the Korean Chemical Society
• /
• v.36 no.4
• /
• pp.517-522
• /
• 1992

The reaction of ${\beta}$-picoline with substituted benzoyl chlorides has been studied by means of conductometry under various pressures in acetonitrile. From the values of pseudo-first order and second order rate constants, the activation parameters (${\Delta}V{\neq}$, ${\Delta}{\beta}{\neq}$, ${\Delta}H{\neq}$, ${\Delta}S{\neq}$ and ${\Delta}G{\neq}$) and the pressure dependence of Hammett ${\rho}$ value were studied. The activation volume, the activation compressibility coefficient and the activation entropy were all negative. By increasing pressure the rate constant and Hammett ${\rho}$ value were increased, and the reaction mechanism was proceed in bond formation favored.

• Fire Science and Engineering
• /
• v.17 no.4
• /
• pp.64-69
• /
• 2003

Low story apartments and housings with manual fire extinguishers are very susceptible to fro damages, when people are absent or there are old and weak peoples. To reduce such fire damages, automatic fire suppression at the early stage is very important, and thus automatic and cost-effec-tiye fire extinguisher was developed. This study revealed that the reaction temperature and response time are greatly influenced by the small thickness variation of the detective parts and heating rates. The influence of the thickness of the detective parts was shown significant when the heating rate was low, The reduction in the thickness could lower the response time to 40seconds.

• Proceedings of the Earthquake Engineering Society of Korea Conference
• /
• 2003.03a
• /
• pp.457-464
• /
• 2003

최근 교량의 건설에 있어서 내진설계가 주요문제로 부각되면서, 구조물의 진동응답을 제어 하는 갖가지 형태의 진동제어 기법이 적용되고 있다. LRB(Lead Rebbe. Bearing), LUD(Lock Up Device)등 다양한 지진격리장치가 설계에 적용되고 있으며 특히, 설계변경 .내진보수보강과 같이 제약 조건이 있는 상황에서 유용한 면진방법으로 사용되고 있다. 이러한 지진격리장치는 기본적인 설계특성인 수평강성, 감쇠성능에 대한 검증을 필요로 한다. 특히, 지진과 같은 동적하중에 대하여 하중속도, 수직력, 변형률 등에 대한 의존성과 내구성의 검토가 필요하며 유사장치에 대하여 검증실험기준의 정립이 진행 중에 있다. 강재이력댐퍼인 E-Shape 댐퍼는 지진격리장치로서 교각의 고정단에 교좌장치로 설치되어 상시에는 탄성영역 내에서 거동하는 고정단의 역할을 하다가, 지진발생시에는 E-Shape형태의 강재댐퍼가 소성변형을 통한 이력거동으로 에너지 소산기능을 가진 교좌장치이다. 최근 LRB에 대하여는 다양한 특성실험이 수행되고 있으나 상대적으로 강재이력댐퍼에 대하여는 이러한 검증실험이 수반되지 않고 사용되고 있다. 본 실험연구에서는 E-Shape 강재이력댐퍼에 대하여 연직하중, 수평변형률, 수평속도에 패한 동적특성을 평가함으로서 강재이력댐퍼를 이용한 지진격리설계의 타당성과 면진성능을 평가해 보았다.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.9 no.6
• /
• pp.585-589
• /
• 1999

In order to grow $Bi_4Ge_3O_{12}$ crystals by the Czochralski method equipped with the auto-diameter control system, we used the resistance heater of our own design. We measure the temperature gradients under-arious thermal configurations. The relation between the critical rotation rate corresponding to the flat interface and the temperature gadient was investigated, and the importance of the axial temperature gradient was pointed out. The results from this work were compared with those obtained by other authors when RF heating was used. The optimal conditions for the crystal growth were determined as follows; under $O_2$ atmosphere with the pulling rate fixed at 2 mm/hr, rotation rate changed from 30 to 23 rpm as the crystal growth proceeded, radial and axial temperature gradients were 50 and $40^{\circ}C$/cm near melts respectively, and the composition was chemically stoichiometric.

• Journal of KIISE:Computer Systems and Theory
• /
• v.26 no.12
• /
• pp.1539-1547
• /
• 1999

캐리-세이브 가산기 (CSA)는 회로 설계 과정에서 빠른 연산 수행을 위해 가장 널리 이용되는 연산기 중의 하나이다. 그러나, 현재까지 산업체에서 CSA를 이용한 설계는 설계자의 경험에 따른 수작업에 의존하고 있고 그 결과 최적의 회로를 만들기 위해 매우 많은 시간과 노력이 소비되고 있다. 이에 따라 최근 CSA를 기초로 하는 회로 합성 자동화 기법에 대한 연구의 필요성이 대두되고 있는 상황에서, 본 논문은 연산 속도를 최적화하는 효율적인 CSA 할당 알고리즘을 제안한다. 우리는 CSA 할당 문제를 2단계로 접근한다: (1) 연산식의 멀티 비트 입력들만을 고려하여 최소 수행 속도 (optimal-delay)의 CSA 트리를 할당한다; (2) (1)에서 구한 CSA 트리의 수행 속도 증가가 최소화 (minimal increase of delay) 되는 방향으로 CSA들의 캐리 입력 포트들에 나머지 싱글 비트 입력들을 배정한다. 실제 실험에서 우리의 제안된 알고리즘을 적용하여 연산식들의 회로 속도를 회로 면적의 증가 없이 상당한 수준까지 줄일 수 있었다.Abstract Carry-save-adder (CSA) is one of the most widely used implementations for fast arithmetics in industry. However, optimizing arithmetic circuits using CSAs is mostly carried out by the designer manually based on his/her design experience, which is a very time-consuming and error-prone task. To overcome this limitation, in this paper we propose an effective synthesis algorithm for solving the problem of finding an allocation of CSAs with a minimal timing for an arithmetic expression. Specifically, we propose a two step approach: (1) allocating a delay-optimal CSA tree for the multi-bit inputs of the arithmetic expression and (2) determining the assignment of the single-bit inputs to carry inputs of the CSAs which leads to a minimal increase of delay of the CSA tree obtained in step (1). For a number of arithmetic expressions, we found that our approach is very effective, reducing the timing of the circuits significantly without increasing the circuit area.

• Applied Chemistry for Engineering
• /
• v.9 no.7
• /
• pp.974-978
• /
• 1998

The kinetics of crystal growth and nucleation in dependence on the supersaturation of an aqueous solution of 3-nitro-1,2,4-triazol-5-one(NTO) were evaluated on the draft tube-baffle(DTB) crystallizer operated batchwise. The crystal growth rate is proportional to the supersaturation to the 2.9 power, and the nucleation rate to the 4.2 power. The uncleation behavior for NTO-water system in DTB crystallizer was grasped according to Mersmann's criteria. The nucleation in this crystallizer was found to act with heterogeneous nucleation and surface uncleation simultaneously. Simplified relation was derived for calculation of mean crystal size of product crystals from the batch cooling crystallizer. The obtained relation was verified by a set of experiments.

• Applied Biological Chemistry
• /
• v.33 no.1
• /
• pp.18-23
• /
• 1990

Seven varieties of soybeans(Paldal, Danyeob, Jangbaek, Baegun, Jangyeob and 2 cultivars of Local 1 and Local 2) were investigated to compare the water uptake properties and volume changes during soaking in water. The hydration properties showed that the equilibrated weight increase ratio decreased as the soaking temperature raised to higher than $40^{\circ}C$, while the initial water uptake rate increased upto $80^{\circ}C$. The increase in hydration showed a linear relationship with the square root of the soaking time at $4^{\circ}{\sim}60^{\circ}C$. Local 1 was the highest in water uptake rate constant while Local 2 was the lowest. The activation energy calculated was in the range of $3,246{\sim}4,694\;cal/mole$. The Jangbaek and Local 1 were the highest and the Paldal was the lowest in the rate of volume increase. The activation energy for volume increase was in the range of $3,310{\sim}4,190\;cal/mole$. The z-values calculated from volume change was a little higher than those obtained from weight change.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.19 no.2
• /
• pp.110-117
• /
• 1999

In order to ultrasonically evaluate creep cavities pure copper samples were subjected to creep test and their microstructures were examined. Ultrasonic velocities. frequency-dependent magnitude spectra and attenuations were measured on a series of copper samples obtained from the different stages of creep test. Velocities measured in three directions with respect to the loading axis decreased and their anisotropy increased as a function of the creep-induced porosity. The anisotropic behavior could be attributed to the progressive change of pore shape and preferred orientation as the creep advanced. The 2% porosity by volume decreased the longitudinal and shear wave velocities by 11% and 4%, respectively. Furthermore, both velocities decreased nonlinearly with the porosity. As the creep damage developed, the magnitude spectra lost high frequency components and their central frequencies shifted to lower values. The attenuation showed almost linear behavior in the frequency range used. Normalized velocity, central frequency shift and attenuation slope were selected as nondestructive evaluation parameters. These results were presented and showed good relations with the porosity content.