• Microbiology and Biotechnology Letters
• /
• v.11 no.1
• /
• pp.59-66
• /
• 1983

Cultural conditions for the production of extracellar $\beta$-galactosidase by Loctobacillus sporogenes, a spore forming lactic acid bacterium, were investigated with shaken flask and jar fermenter cultures. The fermentation medium giving maximum $\beta$-galactosidase yield was found to consist of 1 % lactose as a carbon source, 1.5% peptone as an organic nitrogen source. 0.2% ammonium sulfate as an inorganic nitrogen source, 0.8% ammonium phosphate dibasic as a phosphorus source, and 0.05% potassium chloride and 0.001% ferric chloride as mineral source. Optimal initial pH of the medium was 7.0 and the highest enzyme excretion was observed after 40 hours of cultivation at 37$^{\circ}C$. In this experiment, the 500$m\ell$ conical flask containing 50-200$m\ell$ of medium was shaken at 140 strokes per minute with 7cm amplitude in a reciprocating shaker. The maximum enzyme value attained was 38 U/$m\ell$ of the culture broth which was found to be slightly higher than the highest intermolecular enzyme activity (30 U/$m\ell$) observed after 24 hours of incubation. In the fermentor culture, the fermentation profile was shown to be similar to that observed in the shaken flask experiment. But the maximum extracellular enzyme activity was 45 U/$m\ell$ to be even higher than the value obtained with the shaken flask culture.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.30 no.1
• /
• pp.39-45
• /
• 1997

Subtidal zonation of a cumacean Bodotria biplicata was investigated in the sandy shore surf zone of Dolsando, southern Korea. Three replicate samples were taken with a sledge net at three sites, such as the surface and bottom of 1 m depth and waters edge, at hourly intervals over the neap and spring tide cycles on January 1993 (n=225). B. biplicata, the most dominant cumacean in this area, exhibited peak density at the bottom while about $0.6\%$ of total catch was collected at the surface. Mean density during the neap tide cycle was slightly higher than that during the spring tide cycle. The depth of subtidal zone influenced the total catch of B. biplicata. The changes in density were related to the depth of subtidal zone rather than day-night cycle or ebb-flood tide. The results obtained in this study suggest that the diel vertical migration is not distinct. During both neap and spring tide cycles, B. biplicata attained a density maximum at the same level of about 90 cm below lower low water (LLW). It is likely, therefore, that this species performs shore- and seaward horizontal migration fortnightly. The speed and distance of migration may be directly related to the beach slope and tide range. Ontogenetic differences in subtidal distribution were observed. Juveniles and manca larvae tended to occur lower areas than the adults. Such differences may reduce intraspecific competition for diets.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.3
• /
• pp.694-702
• /
• 2017

In the case of an elevated railway station, structure borne noise and vibration due to structural limitations allow the load and vibration from railway vehicles to be directly transmitted to the station structure, resulting in an increase in the number of civil complaints from customers and staff of the station. The floating slab track system, which is well known as one of the solutions for reducing the noise and vibration from elevated railway stations, usually contains rubber mounts or rubber pads under the railway slab which act as a damper. These types of device have the disadvantage that is difficult to predetermine the exact stiffness and damping ratio under the nonlinear loads resulting from train services. In this study, an isolator with a friction type of wedge is introduced, which can be applied to floating slab track systems and to be designed with precisely the required stiffness. Furthermore, a comparative analysis of the stiffness between the designed and experimental values is carried out, while the damping ratio, which is closely related to the friction wedge blocks, is deduced according to the train load condition. The performance tests of the isolator were conducted in accordance with the DIN 45673-7 standard which includes both static and dynamic load tests. The load conditions for the performance tests are designed to conform to the DIN standard related to the weight of the train and rail track, in order to perform vertical and horizontal load tests, so as to ensure the secure structural safety of the railway. Also, by checking the change aspect of the friction coefficients of the friction elements according to the loading rate, the vibration reduction performance of the friction type isolator with variable loading rate conditions is examined.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.5
• /
• pp.252-261
• /
• 2017

This study examined the effect of heat treatment on the microstructure and mechanical properties of J55 line pipe steel. The experiments were carried out at under the following various conditions: austenization temperature($880^{\circ}C$, $910^{\circ}C$, $940^{\circ}C$), cooling methods(water quenching, oil quenching) and tempering temperature(none, $550^{\circ}C$, $650^{\circ}C$). The phase diagram and CCT curve were simulated based on the chemical composition of J55 steel to predict the microstructures. In the results, A1, A3 temperature decreased. As the austenization temperature increased, existing austenite grains grew exponentially which seriously degraded their mechanical properties. Various microstructures, including martensite, bainite, ferrite, and pearlite, developed in accordance with the heat treatments and were closely correlated with hardness, tensile strength and toughness. Martensite was formed after water quenching, but bainite and ferrite appeared after oil quenching. FeC precipitation formed and coarsened during tempering, which improved their toughness.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.4
• /
• pp.69-76
• /
• 2018

This study examined the effect of the heat treatment and alloying elements (B, Ti) on the microstructures and mechanical properties of API J55 steel. The experiments were carried out using various austenization temperatures ($880^{\circ}C$, $910^{\circ}C$, $940^{\circ}C$), cooling methods (water quenching, oil quenching) and tempering temperatures (none, $550^{\circ}C$, $650^{\circ}C$) with J55 and J55+B,Ti steels. The phase diagram and CCT curve were simulated based on the chemical compositions of the J55 and J55+B,Ti steels to predict the microstructures. The results showed that the A1 and A3 temperatures decreased and, as a result, the noses of the ferrite and bainite parts of the CCT curve moved to the right. Various microstructures were formed, namely martensite, bainite, ferrite and pearlite, in accordance with the heat treatment, which had an effect on the hardness, tensile strength and toughness. Martensite was formed after water quenching, but bainite and ferrite appeared after oil quenching with the J55 specimens. On the other hand, martensite was formed, regardless of the cooling method (water quenching, oil quenching), with the J55+B,Ti specimens, because of the improvement of the hardenability caused by the addition of boron. Therefore, the J55+B,Ti specimens exhibited much higher mechanical properties than the J55 specimens, even after the tempering treatment, since the addition of Ti caused fine precipitates to be formed, which inhibited grain growth at the recrystallization temperature.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.38 no.1
• /
• pp.67-73
• /
• 2012

In the present study, we investigated the effects of dipeptides on melanogenesis in B16 melanoma cells. It was found that WV (Trp+Val), WM (Trp+Met), and CQ (Cys+Gln) decreased melanin production dosedependently. However, dipeptides did not directly inhibit tyrosinase activity, the rate-limiting melanogenic enzyme. Therefore, we further investigated the expression of tyrosinase. Our results showed that ${\alpha}$-MSH-induced tyrosinase expression was down-regulated by WV, WM, and CQ. Thus, we propose that WV, WM, and CQ show hypopigmentary activity through tyrosinase down-regulation.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.32 no.1
• /
• pp.101-108
• /
• 2005

Children are in mixed dentition during 6 years after 3 years old. this time is very important for sound permanent dentition. There are many factors of influence to tooth eruption stage ; adjacent teeth, tooth resorption, early loss or retention of deciduous tooth, local lesion, lip and tongue, masticatory muscles, ect. These factors should be in balance, if not, relation of adjacent teeth is changed, then severe malocclusion is occurred maybe. These cases revealed influences of resin bonded metal splint on occlusal surface of children's molar to mixed dentition. Splints interfere with falling off of deciduous tooth, tooth eruption, normal occlusion formation, and development of mixed dentition and occlusion. Therefore we removed the metal splint from teeth, follow-up checked occlusion and tooth eruption.

• Journal of Korean Society of Forest Science
• /
• v.61 no.1
• /
• pp.20-26
• /
• 1983

Some aspects of the change in the rate of gall formation on the red pine, Pinus densiflora Siebold et Zuccarini, by the pine needle gall midge, Thecodiplosis japonensis Uchida et Inouye, were investigated at the coastal area in Chung Nam-Do from 1977 to 1982, and were analyzed with the nationwide survey data for 2 years from 1980 to 1981. The results obtained were as follows; the gall formation rate in several areas was compared between two consecutive generations. Four regression equations were established, with X as the gall formation rate in N year and Y as that in (N+1) year: 1) Y=11.2+1.15X (r=0.833) for the stands facing north on the phase of insect population increase, 2) Y=14.3+0.82X (r=0.739) for the stands facing south on the phase of population increase, 3) Y=7.3+0.46X (r=0.478) for stands facing north on the phase of population decrease and 4) Y=11.4+0.19X (r=0.086) for stands facing south on the phase of population decrease. After invasion of the pine needle gall midge into a red pine forest, gall formation rate increased for 6 consecutive generations and then decreased to low level within a period of another 6 years.

• Journal of the Korea Concrete Institute
• /
• v.25 no.3
• /
• pp.261-269
• /
• 2013

In this study, it was developed eco-friendly inorganic binding material concrete using ground granulated blast furnace slag and alkali activator (water glass, sodium hydroxides). Eight reinforced concrete beam using inoganic binding material concrete were constructed and tested under monotonic loading. The major variables were mixture ratio of alkali activator, type of admixture and admixture. Experimental programs were carried out to improve and evaluate the flexural performance of such test specimens, such as the load-displacement, the failure mode, the maximum load carrying capacity, and ductility capacity. All the specimens were modeled in scale-down size. The eco-friendly concrete using inorganic binding material encouraged alkali activation reaction was rapidly hardening speed and showed possibility as a high strength concrete. Also, the RC beams using new materials showed similar behavior and failed similarly with RC beam used portland cement. It is thought that eco-friendly inorganic binding material concrete can be used with construction material and product as a basic research to replace cement concrete. If there is application to structures in PC member as well as production of 2nd concrete product, it could be improved the productivity and reduction of construction duration etc.

• Korean journal of applied entomology
• /
• v.33 no.4
• /
• pp.242-249
• /
• 1994

These studles were conducted to investigate the development of chem~cal resistance and cross.resista. nce m dlarnondback moth (Piuteiia xylostella L). The resistance development of diamondback moth greatly vaned under single selection of five insectlades. The tnflumuron and lambda cyhalothnn strains at 8th selected generation showed 374- and 29.l.fold resistant levels. respectively, as compared with the susceptible strain. However, the Baciilus thuringiensis-seleded at 8th selected generatLon exhibited 240-fold resistant level. and the prothiophos-selected at 8th generation revealed 14.3-fold resistant !eve1 while the cartap hydrochloride-selected at 8th generailon showed 9.1-fold resistant level Prothiophos- selected strain showed low cross-resistance level to cartap hydrochloride, while this strain exhibited no cross-resistance of 1.3 to 2.8-fold to other msectlcides. Cartap hydrochlonde- seleded strain showed 19.9-fold. a high cross-resistance to lambda cyhalothrin, but this strain showed 2.2-34 fold, no cross resistance to other insecticide. Lambda cyhalothnn-selected strain exhibited cross-resistance to cartap hydrochlolide and prothiophas. Triflumuron-seleded strain showed 1.3-4.9 fold. no cross-resistance to other ~nsectic~dTe he B. ihuring~ensis-selededs train showed no cross-resistance to other insecticides.