• Transactions of the Korean Society of Automotive Engineers
• /
• v.7 no.6
• /
• pp.207-213
• /
• 1999

In this study, the possibility of estimation of friction coefficient between tire and road surface using running car data are checked. To get necessary data, such as tire and car velocities and braking force, a test car is driven with certain magnitude of decelerations from pre-set initial velocities to stop . The data are used to estimate friction coefficient with property chosen parameters , e.g,, driving stiffness, pressure distribution functions, etc. Experimental results show that running data car be used with properly chosen parameters to estimate friction coefficient.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2010.05a
• /
• pp.459-460
• /
• 2010

For the application of slip form method to the pylon of Yi Sun-shin bridge which has much variation in its cross section, the change of setting properties of concrete due to changing weather and long pumping distance has to be taken into consideration. Different setting properties of several types of cement according to the amount of compound and ambient temperature were observed in this paper.

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.1199-1200
• /
• 2007

고속철도차량의 국내기술확보를 위해 최고운행속도 350km/h의 한국형 고속전철시스템을 개발하여 단품시험, 완성차시험, 공장시험 등을 통해 기본적인 성능을 확인한 후 현재는 본선시운전 시험이 진행중이다. 본 논문에서는 국내기술로 개발된 한국형 고속열차의 슬립검지를 위한 계측시스템 구성과 검지 내용에 대해 서술하고 있다.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.13 no.3
• /
• pp.93-100
• /
• 1999

Wide operating range and speed control is needed for wind power generating and a Doubly Fed Induction Generator(DFlG) has good adaptivity for that purpose. Ths paper investigates speed and output stator power control using a grid connected to a DFlG in super-synchronous speed regions, by control of both magnitude and frequency of the voltage fed to the rotor. For the speed control analysis, torque simulation is perforrred whereby the different slip between qJernting rmtor driving frequency and synchronous frequency of M-G system awlied. To keep the output rating of the generator, the exciting frequency and voltage attenuation are arolied.rolied.

• Proceedings of the KIPE Conference
• /
• 2000.07a
• /
• pp.596-599
• /
• 2000

벡터 제어이론은 교류전동기의 토오크와 자속을 독립적으로 제어할 수 있는 특징이 있으므로 토오크 제어를 주로 하는 견인용 전동기의 제어에 적용하기 위한 연구가 활발히 수행되어 왔다 그러나 선형 유도전동기 구동에는 아직 널리 사용되지 않은 실정이다 벡터 제어이론은 일반적으로 회전자자속 기준제어(Rotor flux oriented control)을 의미하며 이를 구현하기 위한 방법은 자속을 직접 측정 혹은 연산하는 직접제어 방식과 속도를 측정하여 슬립주파수 명령을 제어하는 간접방식으로 분류된다. 최근에는 기존의 회전자자속 기준방식뿐만 아니라 고정자자속(Stator flux oriented) 공극자속(Air gap flux oriented) 기준 방식등이 제안되고 있다. 본연구에서는 자기부상열차의 추진용 선형 유도 전동기의 추진에 가장 적합하다고 생각되는 고정자자속 기준벡터제어 방식과 이를 구현하기 위한 고정자 자속을 추정하는 방법에 대하여 설명한다. 또한 속도제어를 위한 속도 추정방식도 안내코일 등 부장치 없이 전동기 파라미터로 추정할 수 있는 기법에 대하여 논한다.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.3 no.2
• /
• pp.125-130
• /
• 1998

This paper describes a novel flux calculator for the estimation of real rotor flux angle which is indispensable to the field oriented control of induction motors. A pure integrator is used to estimate the real rotor flux precisely from voltage and current information. The proposed flux calculator adopts the new drift compensation method to overcome the drift problem of pure integrator. The motor speed is calculated using estimated flux angle and estimated slip frequency. The performance of this approach is verified through the experiment. The experimental results shows stable operation of proposed system even below 1/100 of rated speed.

• Journal of the Korean Society for Precision Engineering
• /
• v.20 no.9
• /
• pp.126-134
• /
• 2003

This paper investigates the multi-pass wet wire drawing process considering the slip between the wire and the capstan. The production of fine wire through multi-pass wet wire drawing process would be impossible without backtension. The backtension is affected by many process parameters, such as slip, dies reduction, coiling number of wire at the capstan, machine reduction, characteristic of lubricant etc. Up to date, die design and dies pass schedule of multi-pass wet wire drawing process have been performed by trial and error of expert in the industrial field. In this study, an analysis program which can perform the analysis and considering the effect of slip at each capstan was developed. The effects of many important parameters (drawing force, backtension force, needed power, slip rate, slip velocity rate etc.) on multi-pass wet wire drawing process can be predicted by this developed program. It is possible to obtain the important basic data which can be used in the pass schedule of multi-pass wet wire drawing process by using this developed program.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.3 no.3
• /
• pp.651-659
• /
• 1999

This Paper Proposes new speed and electromagnetic torque control of an induction motor, which is robust against time varying parameters. The control is based on adaptive vector control with serial block adaptive algorithm. Motor parameters used to estimates slip frequency and electromagnetic torque. Parameters mismatch in the control system detrimentally affects slip frequency estimation and torque response. In order to compensate lot degradation of the responses, an adaptive identifier for the magnetizing inductance and the secondary time constant is introduced. adaptive vector control system consisted of two subsystems, a vector control system realized on synchronous frame and a parameter identification system on stationary frame. the effectiveness of the proposed method was verified by some digital simulations.

• The Journal of the Acoustical Society of Korea
• /
• v.28 no.6
• /
• pp.499-505
• /
• 2009

Main design issues for MAC (Medium Access Control) protocol in underwater sensor networks are long propagation delay caused by the low speed of sound, difficult synchronization, and energy-limited node's life. We aimed to mitigate the problems of strict synchronization and channel inefficiency of TDMA and also the throughput degradation induced by unavoidable collisions in contention based MAC protocols. This proposed protocol improved not only the energy efficiency by adopting a sleep-mode, but also the throughput by reducing collisions and increasing channel efficiency.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.34 no.7
• /
• pp.891-896
• /
• 2010

A gerotor is used in power-steering units (PSUs) as well as in hydraulic motors or pumps. The inner rotor is developed on the basis of the shape of the outer rotor tooth, which normally has one arc. The method of generating inner rotor on the basis of a generalized shape of outer rotor is analyzed with a view to improve PSU characteristics. An arc-shaped outer rotor with two curvatures was used in the analysis; design parameters such as the shape and curvature of the inner rotor, the flow rate of the gerotor, the position of contact point, and slip velocity are calculated, and these results are shown. This analysis enables us to develop a new design of compact PSUs.