• The Transactions of the Korea Information Processing Society
• /
• v.2 no.5
• /
• pp.677-690
• /
• 1995

In this paper, we propose the high efficiency data compression capable of error control using block-sorting, move to front(MTF) and arithmetic code with variable length in to fixed out. First, the substring with is parsed into length N is shifted one by one symbol. The cyclic shifted rows are sorted in lexicographical order. Second, the MTF technique is applied to get the reference of locality in the sorted substring. Then the preprocessed sequence is coded using VF(variable to fixed) arithmetic code which can be limited the error propagation in one codeword. The key point is how to split the fixed length codeword in proportion to symbol probabilities in VF arithmetic code. We develop the new VF arithmetic coding that split completely the codeword set for arbitrary source alphabet. In addition to, an extended representation for symbol probability is designed by using recursive Gray conversion. The performance of proposed method is compared with other well-known source coding methods with respect to entropy, compression ratio and coding times.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.17 no.9
• /
• pp.993-1000
• /
• 1992

Recently, many researchers have found that the speaker recognition rate is high when they perform the speaker recognition using statistical processing method of orthogonal parameter, which are derived from the analysis of speech signal and contain much of the speaker's identity. This method, however, has problems caused by vocalization speed or time varying feature of speed. Thus, to solve these problems, this paper proposes two methods of speaker recognition which combine DTW algorithm with the method using orthogonal parameters extracted from $Karthumem-Lo\'{e}ve$ Transform method which applies orthogonal parameters as feature vector to ETW algorithm and the other is the method which applies orthogonal parameters to the optimal path. In addition, we compare speaker recognition rate obtained from the proposed two method with that from the conventional method of statistical process of orthogonal parameters. Orthogonal parameters used in this paper are derived from both linear prediction coefficients and partial correlation coefficients of speech signal.

• Journal of the Society of Naval Architects of Korea
• /
• v.31 no.4
• /
• pp.73-81
• /
• 1994

The source and source/dipole distribution methods using 3-dimensional panel method have been widely used for ship motion analysis. When these methods are used, large errors in the predicted hydrodynamic coefficients are introduced around the irregular frequencies caused by the resonance of imaginary internal flow. Therefore, the irregular frequencies need to be removed for an accurate prediction of ship motion. This paper adopts 3-dimensional translating and oscillating Green function derived by Wu. The adaptive integration method, stretching transform and stationary phase method are used for the calculation of the calculation of Green function and the integral equation is derived by distributing the Green function n ship surface and inner free-surface. The condition of zero normal velocity, that is, wall condition on inner free-surface has been successfully used for the removal of irregular frequencies in oscillating problems. The calculations are carried out for series 60($C_B=0.7$) vessel and the results are compared with those of other theoretical analyses and experiment.

• The Journal of Engineering Geology
• /
• v.14 no.1
• /
• pp.29-46
• /
• 2004

It is important to identify geometries of fracture that act as a conduit of fluid flow for characterization of ground water flow in fractured rock. Fracture geometries control hydraulic conductivity and stream lines in a rock mass. However, we have difficulties to acquire whole geometric data of fractures in a field scale because of discontinuous distribution of outcrops and impossibility of continuous collecting of subsurface data. Therefore, it is needed to develop a method to describe whole feature of a target fracture geometry. This study suggests a new approach to develop a method to characterize on the whole feature of a target fracture geometry based on the Fourier transform. After sampling of specimens along a target fracture from borehole cores, effective frequencies among roughness components were selected by the Fourier transform on each specimen. Then, the selected effective frequencies were averaged on each frequency. Because the averaged spectrum includes all the frequency profiles of each specimen, it shows the representative components of the fracture roughness of the target fracture. The inverse Fourier transform is conducted to reconstruct an averaged whole roughness feature after low pass filtering. The reconstructed roughness feature also shows the representative roughness of the target subsurface fracture including the geometrical characteristics of each specimen. It also means that overall roughness feature by scaling up of a fracture. In order to identify the characteristics of permeability coefficients along the target fracture, fracture models were constructed based on the reconstructed roughness feature. The computation of permeability coefficient was performed by the homogenization analysis that can calculate accurate permeability coefficients with full consideration of fracture geometry. The results show a range between $10^{-4}{\;}and{\;}10^{-3}{\;}cm/sec$, indicating reasonable values of permeability coefficient along a large fracture. This approach will be effectively applied to the analysis of permeability characteristics along a large fracture as well as identification of the whole feature of a fracture in a field scale.

• Geophysics and Geophysical Exploration
• /
• v.26 no.4
• /
• pp.229-237
• /
• 2023

The use of artificial sources such as explosives and mechanical vibrations for seismic exploration in urban areas poses challenges, as the vibrations and noise generated can lead to complaints. As an alternative to artificial sources, the surface waves generated by traffic noise can be used to investigate the subsurface properties of urban areas. However, traffic noise takes the form of plane waves moving continuously at a constant speed. To apply existing surface wave processing/inversion techniques to traffic noise, the recorded data need to be transformed into a virtual shot gather format using seismic interferometry. In this study, various seismic interferometry methods were applied to traffic noise data, and the optimal method was derived by comparing the results in the Radon and F-K domains. Additionally, the data acquired using various receiver arrays were processed using seismic interferometry, and the results were compared and analyzed to determine the most optimal receiver array direction for exploration.

• Proceedings of the Korean Association of Geographic Inforamtion Studies Conference
• /
• 2003.04a
• /
• pp.388-393
• /
• 2003

도시화 속도의 증가와 더불어 3차원 자료 획득의 출처가 다양해지연서, 도로 및 건물경계선과 같은 선형 GIS 정보에 대한 신속한 갱신 또한 요구되고 있다. 임의의 출처 자료로부터 대상 자료를 갱신하기 위해서는 가장 먼저 두 자료간의 위치 관계를 결정하여야 하며, 특히 영상정보와 같은 출처 자료와 GIS 자료와 같은 대상 자료간의 위치 관계를 결정하기 위하여 기존에 제시되어온 대부분의 방법들은 두 개 자료간의 관계를 정의 할 수 있는 기준정과 같은 정확한 점 정합 요소(point matching entities)를 요구하고 있다. 따라서 정확한 정합 요소들을 획득할 수 없는 경우 영상과 GIS 자료간의 위치 관계를 결정할 수 없을뿐더러 위치 관계 정립의 결과는 정합 요소들의 분포 및 정확도에 매우 의존하게 된다. 또한 이러한 점 정합 요소들을 정의하기 위해서는 대부분의 경우 수동적으로 이루어질 수밖에 없다. 따라서 본 연구에서는 영상 및 GIS 자료의 선형 정보를 이용하여 정확한 점 정합 요소들을 모르더라도 영상과 GIS 자료간의 위치 관계를 결정할 수 있는 기법을 제시하고자 한다. 사용된 알고리즘은 개선된 Hough 변환(Modified Hough Transform)을 기반으로 다수의 선형 정보 중에 정합되는 요소들을 자동으로 찾아내고 이들을 최소제곱법으로 풀이함으로써 두 데이터간의 기하학적 변환 관계를 결정하는 기법이다. 본 연구에서는 이와 같은 접근을 통해 데이터간의 기하학적 변환 관계를 결정한 후, 영상 상에는 존재하지만 GIS 자료에는 존재하지 않는 선형 정보에 대한 갱신 여부를 확인하고 갱신함으로써 3차원 위치 자료의 자동 생성에 대한 가능성을 제시하고자 한다.로 갈수록 퇴적이 우세한 것으로 관측되었다.보체계의 구축사업의 시각이 행정정보화, 생활정보화, 산업정보화 등 다양한 분야와 결합하여 보다 큰 시너지 효과와 사용자 중심의 서비스 개선을 창출할 수 있는 기반을 제공할 것을 기대해 본다.. 이상의 결과를 종합해볼 때, ${\beta}$-glucan은 고용량일 때 직접적으로 또는 $IFN-{\gamma}$ 존재시에는 저용량에서도 복강 큰 포식세로를 활성화시킬 뿐 아니라, 탐식효율도 높임으로써 면역기능을 증진 시키는 것으로 나타났고, 그 효과는 crude ${\beta}$-glucan의 추출조건에 따라 달라지는 것을 알 수 있었다.eveloped. Design concepts and control methods of a new crane will be introduced in this paper.and momentum balance was applied to the fluid field of bundle. while the movement of′ individual material was taken into account. The constitutive model relating the surface force and the deformation of bundle was introduced by considering a representative prodedure that stands for the bundle movement. Then a fundamental equations system could be simplified considering a steady state of th

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.08a
• /
• pp.345-345
• /
• 2012

최근 의료산업에서는 고해상도 및 동영상 구현이 가능한 직접 방식의 X-선 검측센서에서 X-ray 흡수효율이 좋은 반도체 센서(CdTe, CdZnTe 등)와 성숙된 기술, 집적효율이 뛰어난 CMOS 공정을 이용한 제품을 출시하여 대면적화 및 고집적화가 가능하게 되어 응용분야가 점차 확대되고 있는 추세이다. 하지만 이 역시 고 성능의 X-선 동영상 구현을 위해서는 고 해상도 문제, 검출효율 문제, 대면적화의 어려움이 있다. 기존의 X-선 광 도전층의 증착은 증착 속도와 박막 품질에서 우수한 Evaporation 법이 사용되고 있다. 한편, 대면적에 균일한 박막형성이 가능하기 때문에 양산성에서 우월성을 가지는 sputtering법의 경우, 밀도가 높은 소결체 타겟의 제조가 힘들뿐만 아니라 증착 속도가 낮아 장시간 증착 시 낮은 소결밀도로 인한 타겟 Particle 영향으로 인해서 대 면적에 고품질의 박막을 형성하기가 어렵다. 하지만 최근 소결체 타겟 제조기술 발달과 함께, 대면적화와 장시간 증착에 대한 어려움이 해결되고 있어 sputtering 법을 이용한 고품질 박막 제조 기술의 연구가 시급한 실정이다. 본 연구에서는 $50{\times}50$ mm 크기의 non-alkali 유리기판(Corning E2000) 위에 Evaporation과 RF magnetron sputtering을 사용하여 다양한 기판온도 (RT, 100, 200, 300, $350^{\circ}C$)에서 $1{\mu}m$의 두께로 CdTe 박막을 증착하였다. RF magnetron sputtering의 경우 CdTe 단일 타겟(50：50 at%)을 사용하였으며 Base pressure는 약 $5{\times}10^{-6}$ Torr 이하까지 배기하였고, Working pressure는 약 $7.5{\times}10^{-3}$ Torr에서 증착하였다. 시편과 기판 사이의 거리는 70 mm이며 RF 파워는 150 W로 유지하였다. CdTe 박막의 미세구조는 X-ray diffraction (XRD, BRUKER GADDS) 및 Field Emission Scanning Electron Microscopy (FE-SEM, Hitachi)를 사용하여 측정하였다. 또한, 조건별 박막의 조성은 Energy Dispersive X-ray Spectroscopy (EDS, Horiba, 7395-H)을 사용하여 평가하였다. X-선 동영상 장치의 구현을 위해서는 CdTe 다결정 박막의 높은 흡수효율, 전하수집효율 및 SNR (Signal to Noise Ratio) 등의 물성이 요구된다. 이러한 물성을 나타내기 위해서는 CdTe 박막의 높은 결정성이 중요하다. Evaporation과 RF magnetron sputtering로 제작된 CdTe 박막은 공정 온도가 증가함에 따라 기판상에 도달하는 스퍼터 원자의 에너지 증가로 인해서 결정립이 성장한 것을 확인할 수 있었다. 따라서 CdTe 박막이 직접변환방식 고감도 X-ray 검출기 광도 전층 역할을 수행할 수 있을 것으로 기대된다.

• The Journal of the Acoustical Society of Korea
• /
• v.28 no.2
• /
• pp.119-126
• /
• 2009

This paper describes the non-stringed guitar composed of laser strings, frets, sound synthesis algorithm and a processor. The laser strings that can depict stroke and playing arpeggios comprise laser modules and photo diodes. Frets are implemented by voltage divider. The guitar body does not need to implement physically because commuted waveguide synthesis is used. The proposed frets enable; players to represent all of chords by the chord glove as well as guitar solo. Sliding, hammering-on and pulling-off sounds are synthesized by using parameters from the voltage divider. Because the pitch shifting corresponds to the time-varying propagation speed in the digital waveguide model, the proposed model can synthesize vibrato as well. After transformation of signals from the laser strings and frets into parameters for synthesis algorithm, the digital signal processor, TMS320F2812, performs the real-time synthesis algorithm and communicates with the DAC. The demonstration movieclip available via the Internet shows one to play a song, 'Arirang', synthesized by proposed algorithm and interfaces in real-time. Consequently, we can conclude that the proposed synthesis algorithm is efficient in guitar solo and there is no problem to play the non-stringed guitar in real-time.

• Journal of Korean Society for Geospatial Information Science
• /
• v.1 no.1 s.1
• /
• pp.141-152
• /
• 1993

This study aims to generate digital elevation model from digital satellite imagery. Digital elevation model is being increasingly used for geo-spatial information system database development and for digital map production. Image matching technique was applied to acquire conjugate image coordinates and the algorithm for digital elevation model generation is presented in this study The exterior orientation parameters of the satellite imagery is determined by bundle adjustment and standard correlation was applied for image matching conjugate of image points. The window as well as the searching area have to be defined in image matching. Different sizes of searching area were tested to study the appropriate size of the searching area. Various coordinate transformation methods were applied to improve the computation speed as well as the geometric accuracy. The results were then statistically analysed after which the searching area is determined with the safety factor. To evaluate the accuracy of digital elevation model, 3-D coordinates were extracted from 1/5000 scale topographic map and this was compared to the digital elevation model generated from satellite imagery. The algorithm for generation of digital elevation model generated from satellite imagery is presented in this study which will prove effective in the database development of geo-spatial information system and in digital elevation modelling of large areas.

• Journal of the Institute of Convergence Signal Processing
• /
• v.14 no.2
• /
• pp.82-89
• /
• 2013

A detection method of high precision digital line within image is proposed in this paper. If we set the size of image to $N{\times}N$, in fact it is difficult to use the resulting values that the amount of computation is $O(N^4)$. Multiple algorithms are examined to reduced the amount of computation to $O(N^3)$, while suppressing the degradation of precision. How to detect line from the image processing, after stretching treatment of line segments extracted by Hough transform in the local area of an image is a great way to be able to detect several long or short line at high speed, but this method is slightly less precision in the detection of tilted line segments. In this paper, a line detection method improving the precision detection of tilted line segment is applied to the local area, thereby this method does not reduce the processing speed, while it is high precision method for detecting line segments. The experimental results confirm that the proposed method can detect a high precision line in a shorter period of time, compared with the existing methods.