• Title/Summary/Keyword: 속도감쇠

Search Result 299, Processing Time 0.041 seconds

Mode Characteristics of Longitudinal Guided Waves in Buried Steel Pipes (매립된 파이프에서 유도초음파의 종파 모드 특성)

  • Lee, Ju-Won;Shin, Sung-Woo;Na, Won-Bae;Kim, Jae-Min
    • Proceedings of the Computational Structural Engineering Institute Conference
    • /
    • 2010.04a
    • /
    • pp.674-677
    • /
    • 2010
  • 본 논문에서는 지반에 매립된 파이프에서 전파되는 유도초음파의 종파 모드 특성을 분석하였다. 지상 배관과는 달리 매립 배관에서는 주변 매질로 유도초음파의 누설이 발생할 수 있으며, 이로 인하여 유도초음파의 감쇠가 상대적으로 커질 수 있다. 따라서 본 연구에서는 유도초음파의 여러 특성들 중 종파 모드의 감쇠 특성을 중점적으로 분석하였다. 감쇠에 영향을 미치는 지반의 파동 특성(밀도, 체적종파속도, 체적횡파속도)을 결정하기 위하여 포화도와 다짐을 고려하였다. 포화도가 증가할수록 지반의 체적종파속도와 체적횡파속도는 감소하며, 다짐된 지반은 밀도와 체적종파속도, 체적횡파속도를 증가시킨다. 이와 같은 조건으로 결정된 지반의 파동 특성치와 배관의 물성치를 바탕으로 유도초음파 종파 모드의 감쇠 곡선을 계산하고, 특성을 분석하였다. 결과적으로 포화도가 증가할수록 종파 모드의 감쇠는 감소하는 경향을 나타내었고, 다짐이 증가할 경우 감쇠는 전반적으로 증가하는 경향을 나타냄을 알 수 있었다.

  • PDF

Maximum Control Force of Velocity-dependent Damping Devices Using Response Estimation Models (응답예측모델을 이용한 속도의존형 감쇠장치의 최대제어력 산정)

  • 이상현;민경원
    • Transactions of the Korean Society for Noise and Vibration Engineering
    • /
    • v.14 no.6
    • /
    • pp.503-511
    • /
    • 2004
  • In this study, for estimating responses of a controlled structure and determining the maximum control force of velocity-dependent damping devices, three estimation models such as Fourier envelope convex model, probability model, and Newmark design spectrum are used. For this purpose, a procedure is proposed for estimating actual velocity using pseudo-velocity and this procedure considers the effects of damping ratio increased by the damping device. Time history results indicate that actual velocity should be used for estimating accurate maximum control force of damping device and Newmark design spectrum modified by the proposed equation gives the best estimation results for over all period structures.

Linear Shallow Water Equations for Waves with Damping (파랑 에너지 감쇠가 있는 경우의 선형천수방정식)

  • Jung, Tae-Hwa;Lee, Chang-Hoon
    • Journal of Korean Society of Coastal and Ocean Engineers
    • /
    • v.24 no.1
    • /
    • pp.10-15
    • /
    • 2012
  • Wave characteristics in the presence of energy damping are investigated using the linear shallow water equations. To get the phase and energy velocities, geometric optics approach is used and then these values are validated through numerical experiments. Energy damping affects wave height, phase and energy velocities which result in wave transformation. When the complex wavenumber is used by the Eulerian approach, it is found that the phase velocity decreases as the damping increases while the energy velocity increases showing higher values than the phase velocity. When the complex angular frequency is used by the Lagrangian approach, the energy-damping wave group is found to propagate in the energy velocity. The energy velocity is found to affect shoaling and refraction coefficient which is verified through numerical experiments for waves on a plane slope.

Accelerating Levenberg-Marquardt Algorithm using Variable Damping Parameter (가변 감쇠 파라미터를 이용한 Levenberg-Marquardt 알고리즘의 학습 속도 향상)

  • Kwak, Young-Tae
    • Journal of the Korea Society of Computer and Information
    • /
    • v.15 no.4
    • /
    • pp.57-63
    • /
    • 2010
  • The damping parameter of Levenberg-Marquardt algorithm switches between error backpropagation and Gauss-Newton learning and affects learning speed. Fixing the damping parameter induces some oscillation of error and decreases learning speed. Therefore, we propose the way of a variable damping parameter with referring to the alternation of error. The proposed method makes the damping parameter increase if error rate is large and makes it decrease if error rate is small. This method so plays the role of momentum that it can improve learning speed. We tested both iris recognition and wine recognition for this paper. We found out that this method improved learning speed in 67% cases on iris recognition and in 78% cases on wine recognition. It was also showed that the oscillation of error by the proposed way was less than those of other algorithms.

Roll Damping Moment of a Small Fishing Vessel by Free Rolling Test in Waves (파랑중 자유 횡동요 시험에 의한 소형어선의 횡동요 감쇠모멘트에 관한 연구)

  • H.H. Chun;S.H. Chun;S.Y. Kim
    • Journal of the Society of Naval Architects of Korea
    • /
    • v.37 no.2
    • /
    • pp.30-37
    • /
    • 2000
  • The roll damping characteristics of the three models of a 3ton class fishing vessel, that is the bare hull, hull with bilge keels, and hull with bilge keels and a central wing are investigated by the free roll tests in head waves in a towing tank with the variations of the forward speed, initial angle and OG. The wave length variations are also included. The experimental results are compared with the numerical results of mathematical modellings by the energy method for these three models and the energy dissipation patterns are also compared. The roll damping speed increases, the effect of the waves on the roll damping of the models with the additional devices is negligible due to the much increased damping caused by the lift increase.

  • PDF

Modulus and Damping Properties of Kaolinite Using Ultrasonic Testing (초음파를 이용한 카올린 점토의 계수 및 감쇠 특성)

  • 민덕기
    • Journal of the Korean Geotechnical Society
    • /
    • v.18 no.6
    • /
    • pp.17-24
    • /
    • 2002
  • The objective of the present research is to evaluate the wave propagation velocity and attenuation characteristics of kaolin clay specimens using ultrasonic testing. Test specimens with known initial micro-fabric were prepared using a two-stage slurry consolidation technique. For a known state of stress conditions, initial void ratio, and micro-fabric, a series of experiments were conducted to evaluate the longitudinal wave propagation velocity and associated damping behavior. The effects of major variables involved in ultrasonic testing of cohesive soil were considered in this study. Ultrasonic velocity was not correlated to the microfabric structure under the given consolidated pressure whereas ultrasonic attenuation was affected by the microstructural properties of the specimen.

A Study on the Wave Drift Damping of Moored Floating Structures in Regular Waves (계류된 부유체의 규칙파중 표류감쇠에 대한 연구)

  • Park, In K.;Choi, Hang S.
    • Journal of the Society of Naval Architects of Korea
    • /
    • v.33 no.1
    • /
    • pp.40-53
    • /
    • 1996
  • In this paper, the wave drift damping is studied. An approximate method is adopted to calculate the wave drift damping for the sake of practical applications. By assuming the ship's forward speed to be low, the Green function and the velocity potential are expanded asymptotically with respect to the Brard number(${\tau}$) and terms up to the first order of ${\tau}$ are retained. Mean wave drift forces are computed straightforwardly. The wave drift damping is estimated as the change rate of the mean wave drift force with respect to the ship's speed. In order to validate the present method, Series 60(Cb=0.7) ship is exemplified for forward speed of Fn=0, 0.02 and 0.04. To predict the wave drift damping experimentally, three geosym models of the Esso-Osaka tanker are used. Also the effect of drift angle on the wave drift damping is also considered. Comparisons between numerical and experimental results show reasonable agreements.

  • PDF

Vibration Reduction Control of Marine Electronic Horizontal Balancer (선박용 전자식 수평진동감쇠장치의 진동감쇠제어)

  • Yang, Hyun-Suk;Yoon, Kyoung-Kuk;Kim, Yoon-Sik;Seo, Dong-Hoan;Kim, Sung-Hwan;Kwon, Yeong-Gwal;Lee, Sung-Geun
    • Journal of Advanced Marine Engineering and Technology
    • /
    • v.34 no.8
    • /
    • pp.1153-1158
    • /
    • 2010
  • In this paper, We make horizontal balancer (HB) and confirm a possibility of the technique that can be applied to ship through horizontal vibration reduction experiment. We use MATLAB as the simulator tool and experimental equipment consists of two induction motors shafts of which cam type unbalanced loads are fixed to, DSP and inverter circuit. Two induction motors perform roles as vibrator and balancer respectively, DSP control softwares such as speed, phase and vector control program. The simulation and experimental results show that the balancer characterizes good vibration reduction by phase control.

High frequency P velocity and attenuation coefficient of the rocks under the broad-band seismic station (광대역 관측소 하부 암석의 고주파수 탄성파 속도 및 감쇠상수에 대한 연구)

  • Lee, Duk-Kee;Oh, Seok-Hoon;Youn, Yong-Hoon;Yang, Jun-Mo
    • Journal of the Korean Geophysical Society
    • /
    • v.5 no.3
    • /
    • pp.165-174
    • /
    • 2002
  • Seismic velocity and attenuation coefficient of the rocks under the broad-band earthquake observatories of the Korea Meteorological Administration have been measured in the laboratory by using very high frequency seismic waves. Estimated P velocities of the rocks range from 3.2 km/s to 5.6 km/s, depending on the rock type, mineral, and weathering, while, the attenuation coefficients vary from 0.06 to 4.3 db/kHz-m. It seems that P velocities is inversely proportional to the attenuation coefficients of the rocks. Average travel-time delays of the broad-band stations seem to be related with the measured P velocities in the laboratory.

  • PDF

"실린더내에서 Swirl의 생성과 감쇠"

  • 전절정일;채재우역
    • Journal of the korean Society of Automotive Engineers
    • /
    • v.7 no.3
    • /
    • pp.19-29
    • /
    • 1985
  • 기관실린더내 Swirl의 생성과 감쇠의 예측은 종래부터 Swirl을 강체회전적인 속도분포를 갖는 흐 름으로 판정하여 행해져 왔다. 본 원고는 이제까지 실험되어져 왔던 예측명을 대략 설명하고, 실 제기관에 대한 측정결과와의 관계를 서술과 함께, 기관 실린더내 Swirl속도계측방법의 구체적인 예를 소개한다.

  • PDF