• Proceedings of the Korean Information Science Society Conference
• /
• 2001.10b
• /
• pp.496-498
• /
• 2001

GIS를 이용한 원격 탐사 방법으로, 기존의 항공촬영을 위한 전용 항공기와 전용 촬영 장비를 사용하는 대신 경비행기와 소형 video-camera를 이용하여 비교적 저렴한 비용으로 자료 획득이 가능하다. 그러나 기존의 황공촬영 방식과 달리, 이 Video-GIS 방식은 좁은 시야각과 촬영 자세가 쉽게 변하는 문제점을 가지고 있으며, 동영상에서 각 영상 frame을 일일이 추출하여 수작업으로 mosaic하여 하나의 큰 영상을 만들어야 하는 단점이 있었다. 본 논문에서는 이러만 수동작업 영상 mosaic를 자동화하는 새로운 방법을 제시 하고자 한다.

• Journal of Aerospace System Engineering
• /
• v.6 no.2
• /
• pp.1-6
• /
• 2012

On this study, as a Human Factor(HF)'s point of view, typical PVI(Pilot Vehicle Interface) evaluation for small airplane cockpit design, PVI evaluation items and procedures to show compliance to KAS Part 23 "Airworthiness Standards : Normal, Utility, Acrobatic, And Commuter Category Airplanes" are introduced and reviewed. This study is based on the experience of Korean small civil airplane development and certification program.

• Journal of Aerospace System Engineering
• /
• v.5 no.2
• /
• pp.1-7
• /
• 2011

On this study, applicable aircraft pitot-static system airworthiness requirements and flight test techniques for PEC(Position Error Correction) to KAS Part 23 airworthiness standards are introduced. Also, pros and cons, applicable test conditions, test procedures and required test parameters of each flight test techniques are reviewed on this study.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.28 no.1
• /
• pp.59-65
• /
• 2020

This paper presents comparative results of configuration modeling and aerodynamic analysis to single-engine airplanes such as C-172, SR-20, and DA40NG. The software OpenVSP was used as an airplane configuration modeling tool. OpenVSP can provide the fastest method to get three-dimensional aircraft configuration from given basic data and drawings of aircraft. Parametric design input in OpenVSP, from given aircraft geometric parameters, was applied to small airplanes mentioned. New aircraft models in this study were reversely designed to coincide with the publicly obtained dimensions of the original aircraft. The basic aerodynamic analysis of newly designed modeling aircraft was performed by the vortex lattice method. Results are shown that the similarity of aerodynamic data obtained except for the lack of DA40NG. In conclusion, the modeling process applied to this work is valuable to obtain conceptual design insight in the reverse design from the small airplanes currently in use for flight training.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.7 no.4
• /
• pp.143-154
• /
• 2004

The researchers, who seek geological and environmental information, depend on the remote sensing and aerial photographic datum from various commercial satellites and aircraft. However, the adverse weather conditions and the expensive equipment can restrict that the researcher can collect their data anywhere and any time. To allow for better flexibility, we have developed a compact, a multi-spectral automatic Aerial photographic system(PKNU 2). This system's Multi-spectral camera can catch the visible(RGB) and infrared(NIR) bands($3032{\times}2008$ pixels) image. Visible and infrared bands images were obtained from each camera respectively and produced Color-infrared composite images to be analyzed in the purpose of the environment monitor but that was not very good data. Moreover, it has a demerit that the stereoscopic overlap area is not satisfied with 60% due to the 12s storage time of each data, while it was possible that PKNU 2 system photographed photos of great capacity. Therefore, we have been developing the advanced PKNU 2(PKNU 3) that consists of color-infrared spectral camera can photograph the visible and near infrared bands data using one sensor at once, thermal infrared camera, two of 40 G computers to store images, and MPEG board to compress and transfer data to the computer at the real time and can attach and detach itself to a helicopter. Verification and calibration of each sensor(REDLAKE MS 4000, Raytheon IRPro) were conducted before we took the aerial photographs for obtaining more valuable data. Corrections for the spectral characteristics and radial lens distortions of sensor were carried out.

• Journal of Aerospace System Engineering
• /
• v.8 no.3
• /
• pp.47-54
• /
• 2014

This is a research on the method of how to improve stall characteristics for the small general aviation airplanes to meet the FAR part 23 requirements. This research is based on the experience of certification flight tests of KC-100 airplane for Korea type certification. KAS/FAR Part 23.201/203 are the stall characteristics requirements. 23.201 requires to show the stable stalling tendency of the wings level stall and 23.203 requires to show the stable stalling tendency of stall characteristics during turning flight. In this paper, the stall characteristics requirements, improvement methods and flight test experience of KC-100 airplane for type certification.

• Bulletin of the Korean Space Science Society
• /
• 2009.10a
• /
• pp.49.2-49.2
• /
• 2009

소형우주발사체 KSLV-I의 상단부 전자장비 탑재 구조체의 외부면에는 텔레메트리, 원격추적, GPS, 비행종단 시스템의 안테나가 두 개 또는 세 개씩 장착된다. 발사체의 표면에 안테나를 부착할 수 있는 위치는 제한되어 있기 때문에 각 안테나 들은 서로 인접되어 부착된다. 또한 상단부 전자장비들과 지상장비의 성능을 검증하기 위해 수행되는 경비행기를 이용한 비행시험은 각 안테나들이 더욱 근접하여 장착된 상태로 수행된다. 따라서 각 하부시스템의 안테나 사이에 발생하는 간섭현상을 분석하기 위한 연구가 요구된다. 이 논문에서는 시간영역 유한차분법을 이용하여 서로 다른 하부시스템의 안테나 간에 발생하는 간섭영향을 해석하였다. 수행된 해석 과정은 우주발사체의 안테나 방사패턴을 해석하는데 이용될 수 있으며, 향후 우주발사체의 시스템 설계 과정에서 안테나의 배치 방법과 각 하부시스템의 성능 요구조건을 결정하는데 효과적으로 사용될 수 있다.

• Proceedings of the KAIS Fall Conference
• /
• 2004.11a
• /
• pp.87-89
• /
• 2004

정밀화와 더불어 고품질화 되고 있는 사출성형 산업에서 CAE기술(Computer Aided Engineering)은 성형 시행오차를 줄여 원가를 절감하고, 생산성을 향상시킬 수 있는 최적의 대안이라 할 수 있다. 본 연구는 이러한 CAE 기술을 활용하여 현장에서 사출성형하기 힘든, 두께 0.3mm인 소형 RC비행기 Battery Case제품을 대상으로 유동해석을 통해 최적 Gate와 유동기구의 설계 조건을 도출하고 구현하고자 하였다.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.34 no.4
• /
• pp.1343-1351
• /
• 2014

Recent technological advances in wireless networks and microelectromechanical systems (MEMS) have led to the development of different types of mini-UAVs and their utilizations in various ways. This study endeavors to develop a low-cost mini-UAV with autonomous flight capability, in order to obtain geospatial information of a small or medium-sized area, and also assess its flight stability by comparing the predetermined flight paths against the actual flight paths. Based on a post-development flight test, stable flight has been proven achievable as follows: the maximum endurance speed is 1 hour, the flying distance is 50km, the horizontal accuracy of flight paths is about ${\pm}6{\sim}8m$, and the altitude accuracy is about ${\pm}8m$. Therefore, it is deemed that high-resolution images which can be utilized for geospatial information are obtainable. This indicates that a UAV flying at an altitude of 200m can acquire images across a $2km{\times}3km$ area on the ground within 25 minutes, which validates its high usability for obtaining high-solution images at low altitudes in the future.

• Journal of Aerospace System Engineering
• /
• v.7 no.2
• /
• pp.23-28
• /
• 2013

This is a research on the method of how to improve lateral stability for the small general aviation airplane to meet the FAR part 23 requirements. This research is based on the experience of certification flight tests of KC-100 airplane for Korea first type certification. KAS/FAR Part 23.177 is the static lateral and directional stability requirement. And, 23.177(b) requires to show the tendency to raise the low wing in steady heading side slip maneuver. However, it is very difficult for the low wing to be raised at the low speed during the steady heading side slip maneuver. So, the requirement allows not be negative at the $1.2V_{S1}$ speed and takeoff configuration. (static stability requirement requires low wing picked up at any speed except $1.2V_{S1}$ speed and takeoff configuration) In this paper, the static lateral stability requirements and the lessons & learned of KC-100 airplane certification flight test results are shown.