• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2017.05a
• /
• pp.207-212
• /
• 2017

Korean civil airworthiness requirements of powerplant system are regulated on KAS Part 23 and Part 33. These are equivalent to FAR Part 23, Part 33 of FAA and CS-23, CS-E of EASA. FAA and EASA rewrites entire airworthiness requirements for the small airplane. It changed current 'prescriptive regulation' into 'performance-based regulation' which makes the object of safety performance. Powerplant requirements are also changed extensively by these concept revolution. In accordance with reorganization, we studied new powerplant system requirements of FAR Part 23 and proposed ideal direction to rewrite of Korean Airworthiness Standard rewrite.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.5 no.1
• /
• pp.17-30
• /
• 1997

FIight Test procedures are studied from FAR 23, AC 23-8, and Order 8110.7. We have been studied the main procedures for the type certification of light airplane from the experiences of Chang Gong 91. This study is intended as a reference for small airplane manufacturers, engineers, flight test engineers, and engineering flight test pilots, including government personnel. This study covers flight test items of interest during type certification. These methods and procedures are promulgated, in the interest of standardization, for use during normal category airplane flight test certification activities.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.22 no.3
• /
• pp.128-133
• /
• 2018

Korean civil airworthiness requirements of powerplant system are regulated by KAS(Korean Airworthiness Standard) Part 23 and Part 33. These are equivalent to FAR Part 23, Part 33 of FAA, and CS-23 and CS-E of EASA. FAA and EASA rewrite the airworthiness requirements for small airplane. They changed current 'prescriptive regulation' to a 'performance-based regulation' which makes safety performance the objective. Powerplant requirements have also been changed extensively by this concept revolution. In accordance with this reorganization, we studied the new powerplant system requirements of FAR Part 23 and proposed ideal directions to rewrite the Korean Airworthiness Standard.

• ICROS
• /
• v.4 no.4
• /
• pp.7-10
• /
• 1998

• Proceedings of the Korea Society for Simulation Conference
• /
• 2004.05a
• /
• pp.142-147
• /
• 2004

It is very difficult to acquire high-fidelity flight test data for small airplanes such as typical unmanned aerial vehicles because MEMS-type small sensors used in the tests do not present reliable data in general. Besides, it is not practical to conduct expensive flight tests for low-cost small airplanes in order to simulate their flight characteristics. A practical approach to obtain acceptable flight data, including stability and control derivatives and data of weight and balance, is proposed in this study. Aircraft design software such as Darcorp's AAA is used to generate aerodynamic data for small airplanes, and moments of inertia are calculated using CATIA, structural design software. These flight data from simulation software are evaluated subjectively and tailored using simulation flight by experienced pilots, based on the certified procedures in FAA AC 120-45A and 40B, which are used for manned airplane simulators.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.46 no.8
• /
• pp.694-701
• /
• 2018

Civil aircraft noise certification standard is based on the ICAO Annex 16 Vol. 1. And, the standard uses A-Weighted SPL, EPNL and SEL method depending on the aircraft category. Korean noise standards, KAS 36 and other nation's CS 36 and FAR 36 noise standards were developed and revised according to the international noise standards, ICAO Annex 16. And, the national noise requirements are equivalent each other. The small airplane noise certification requires only take-off noise level with A-Weighted SPL in dB(A) unit. The first Korean aircraft noise certification was performed for the KC-100 certification in August 2012 with Korean authority and U.S. FAA. The noise certification requires much knowledge and experience in flight tests and noise data processing. In this study, the noise test requirements, test conditions and data correcting methods are shown with the test examples.

• Korean Journal of Remote Sensing
• /
• v.19 no.4
• /
• pp.291-305
• /
• 2003

The cost of deploying Geological and Environmental information gathering systems, especially when such systems obtain remote sensing and photographic data through the use of commercial satellites and aircraft. Besides the high cost equipment required, adverse weather conditions can further restrict a researcher's ability to collect data anywhere and anytime. To mitigate this problem, we have developed a compact, multi-spectral automatic Aerial photographic system. This system's Multi-spectral camera is capable of the visible (RGB) and infrared (NIR) bands (3032*2008 pixel). It consists of a thermal infrared camera and automatic balance control, and can be managed by a palm-top computer. Other features includes a camera gimbal system, GPS receiver, weather sensor among others. We have evaluated the efficiency of this system in several field tests at the following locations: Kyongsang-bukdo beach, Nakdong river (at each site of mulkeum-namji and koryung-gumi), and Kyungahn River. Its tested ability in aerial photography, weather data, as well as GPS data acquisition demonstrates its flexibility as a tool for environmental data monitoring.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2012.07a
• /
• pp.63-64
• /
• 2012

본 논문에서는 소형 무인 비행체 (Unmanned Aerial Vehicle, UAV)를 스마트폰을 이용하여 제어하기 위한 방법을 제안하고. UAV에 Wi-Fi 통신 모듈 설계 및 개발 과정을 설명한다. 스마트폰과 UAV는 Wi-Fi를 통해 통신하며, 이것의 instruction set은 MCU에서 C언어로 다운로드 된 로직으로 수행하게 된다. 데이터의 송수신은 Serial 포트를 이용하여 흐름을 제어하며 확인할 수 있다. 또한 관련 모듈들을 통합하기 위해 PCB(Printed Circuit Board)과정을 진행, 소형화하여 개발하였다.

• Journal of Aerospace System Engineering
• /
• v.7 no.3
• /
• pp.39-44
• /
• 2013

On this study, climb performance related airworthiness requirements for small airplane on KAS Part 23 and flight test techniques for climb performance (Sawtooth climb) are introduced. Also, applicable procedures, test conditions and required test parameters of sawtooth climb flight test techniques are reviewed.

• Journal of Aerospace System Engineering
• /
• v.6 no.3
• /
• pp.34-39
• /
• 2012

In this paper, analysis of airworthiness requirements which require flight test to show compliance and flight test method as means of compliance to those requirements are provided. For unusable fuel test, sufficient discussion between certification authority and applicant is required to select test conditions. For hot weather fuel system operation test, preservation and heating of test fuel should be done carefully not to adversely affect to test result.