• Title/Summary/Keyword: 소형어선

Search Result 277, Processing Time 0.029 seconds

A Study on the Operating Direction in Korea Ship Communication (우리나라의 선박통신 운용에 관한 연구 (여객선 세월호 침몰사고를 중심으로))

  • Shin, Hyun-Shik
    • The Journal of the Korea institute of electronic communication sciences
    • /
    • v.9 no.6
    • /
    • pp.633-640
    • /
    • 2014
  • This paper is what accident in sea have been produced as lost themselves life and property about 600~700times at every years. It was analyzed that the collision accident is highest rank by 37% among the marine accidents and the fishing vessel is highest by 58% in these collision accidents and also the small fishing boat under 20tons is highest by 27% on them. Over the half of thecollision accidents by 56% they couldn't find each other to just before the collision situation. Therefore this was induced to experiment on a national basis that the role of communication of ship is to move from lose themselves life and property.

On the Development of a Microwave Navigational Aid System Suitable for Small Fishing Boats (마이크로파를 이용한 소형어선용 선위측정방식 개발에 관한 연구)

  • 정세모;이상집
    • Journal of the Korean Institute of Navigation
    • /
    • v.3 no.1
    • /
    • pp.47-77
    • /
    • 1979
  • A microwave Navigational Aid system is suggested suitable for fishing boats too small to be equipped with Radar or Radio-Direction-Finder. The system proposed here is similar to that of Talking-Beacon developed in Japan, but the distinctive modification proposed is that an increase of sixteen times in peak transmitting power, thus an accompanying increase of coverage, is achieved with the same mean transmitting power as that of Japan without sacrificing the clearness of azimuth information, by adopting a pulse repetition modulation instead of pulse width modulation as in Japan system. An experimental land station transmitter of transmitting frequency of 9, 370MHz and of peak power of 35kw with a microwave beam of 1 degree in horizontal width and 7 degrees in vertical width rotating once every three minutes, and also an experimental receiver of 20-dB in sensitivity and of an assumed cost of 100 dollars, operated by a 12 volts battery source are made, and the sail test results are reported showing that a bearing infromation of an accuracy of within two degrees can be obtainable every three minutes at a distance of as far as 24 miles from the transmitter if the transmitter is located as high as 100 meters above sea-level.

  • PDF

A study on the characteristics of shipwaves in shallow water (천해역에서의 항주파의 특성에 관한 연구)

  • Gang Song-Jin;Kim Sun-Kyu;Son Chang-Bae;Kim Jong-Sung;Hong Jeong-Hyeok;Kim Chang-Je
    • Proceedings of the Korean Institute of Navigation and Port Research Conference
    • /
    • 2006.06b
    • /
    • pp.185-190
    • /
    • 2006
  • Damages such as beach erosion, seawall destruction and difficulty of cargo working due to rolling of ship result from shipwave. In addition, high speed operations of motor boat and passenger ship respectively jeopardize sea bathers and anglers' safety. In general, shipwaves in shallow water have worse effect on coastal facilities and working people there than those in deepwater. This study aims to investigate the characteristics of shipwaves which occurred and propagated in shallowwater experimentally and theoretically.

  • PDF

A Study on the Assessment of Environment Stress in Mokpo Approaching Channel (목포항 출입항로의 환경스트레스 평가에 관한 연구)

  • KIM Chol-Seong;JONG Jae-Yong;Park Sung-Hyun
    • Journal of the Korean Society of Marine Environment & Safety
    • /
    • v.12 no.3 s.26
    • /
    • pp.211-218
    • /
    • 2006
  • Recently, many ships such as fishing boats, cargo ships, high speed ferry boats are visiting Mokpo harbor. In particular, many marine accidents have been occurred at this area due to the narrow channel, a thick fog, the existing of the shallow waters etc. However there is no suitable ships' routeing system which takes account of today's traffic situations in this area. This study aims at the settling of hazardous factors to mitigate the danger to vessels in Mokpo harbor and to secure the safety of maritime environment.

  • PDF

A study on exhaust emission characteristics according to operating conditions and butanol blended fuels in a small diesel engine for fishing vessel (소형 어선용 디젤기관의 운전조건과 부탄올 혼합유의 배기 배출물 특성에 관한 연구)

  • KIM, Sang-Am;WANG, Woo-Gyeong
    • Journal of the Korean Society of Fisheries and Ocean Technology
    • /
    • v.57 no.3
    • /
    • pp.256-263
    • /
    • 2021
  • In this study, blending oils of diesel oil and butanol were used as fuel oil for diesel engine to measure combustion pressure, fuel consumption, air ratio and exhaust gas emission due to various operating conditions such as engine revolution and torque. Using these data, the results of analyzing the engine performance, combustion characteristics and exhaust emission characteristics such as NOx (nitrogen oxides), CO2 (carbon dioxide), CO (carbon monoxide) and soot were as follows. The fuel conversion efficiency at each load was highest when driven in the engine revolution determined by a fixed pitch propeller law. Except 30% butanol blending oil, fuel conversion efficiency of the other fuel oils increased as the load increased. Compared to diesel oil, using 10% and 20% butanol blending oil as fuel oil was advantageous in terms of thermal efficiency, but it did not have a significant impact on the reduction of exhaust gas emissions. On the other hand, future research is needed on the results of the 20% butanol blending oil showing lower or similar levels of smoke concentration and carbon monoxide emission rate other than those types of diesel oil.

A study on estimating the main dimensions of a small fishing boat using deep learning (딥러닝을 이용한 연안 소형 어선 주요 치수 추정 연구)

  • JANG, Min Sung;KIM, Dong-Joon;ZHAO, Yang
    • Journal of the Korean Society of Fisheries and Ocean Technology
    • /
    • v.58 no.3
    • /
    • pp.272-280
    • /
    • 2022
  • The first step is to determine the principal dimensions of the design ship, such as length between perpendiculars, beam, draft and depth when accomplishing the design of a new vessel. To make this process easier, a database with a large amount of existing ship data and a regression analysis technique are needed. Recently, deep learning, a branch of artificial intelligence (AI) has been used in regression analysis. In this paper, deep learning neural networks are used for regression analysis to find the regression function between the input and output data. To find the neural network structure with the highest accuracy, the errors of neural network structures with varying the number of the layers and the nodes are compared. In this paper, Python TensorFlow Keras API and MATLAB Deep Learning Toolbox are used to build deep learning neural networks. Constructed DNN (deep neural networks) makes helpful in determining the principal dimension of the ship and saves much time in the ship design process.

A Study on the Performance Verification Method of Small-Sized LTE-Maritime Transceiver (소형 초고속해상무선통신망 송수신기 성능 검증 방안에 관한 연구)

  • Seok Woo;Bu-young Kim;Woo-Seong Shim
    • Journal of the Korean Society of Marine Environment & Safety
    • /
    • v.29 no.7
    • /
    • pp.902-909
    • /
    • 2023
  • This study evaluated the performance test of a small-sized LTE-Maritime(LTE-M) transceiver that was developed and promoted to expand the use of intelligent maritime traf ic information services led by the Ministry of Oceans and Fisheries with the aim of supporting the prevention of maritime accidents. Accoriding to statistics, approximately 30% of all marine accidents in Korean water occur with ships weighing less than 3 tons. Therefore, the blind spots of maritime safety must be supplemented through the development of small-sized transceivers. The small transceiver may be used in fishing boats that are active near coastal waters and in water leisure equipment near the coastline. Therefore, verifying whether sufficient performance and stable communication quality are provided is necessary, considering the environment of their real usage. In this study, we reviewed the communication quality goals of the LTE-M network and the performance requirements of small-sized transceivers suggested by the Ministry of Oceans and Fisheries, and proposed a test plan to appropriately evaluate the performance of small-sized transceivers. The validity of the proposed test method was verified for six real-sea areas with a high frequency of marine accidents. Consequently, the downlink and uplink transmission speeds of the small-sized LTE-M transceiver showed performances of 9 Mbps or more and 3 Mbps or more, respectively. In addition, using the coverage analysis system, coverage of more than 95% and 100% were confirmed in the intensive management zone (0-30 km) and interesting zone (30-50 km), respectively. The performance evaluation method and test results proposed in this paper are expected to be used as reference materials for verifying the performance of transceivers, contributing to the spread of government-promoted e-navigation services and small-sized transceivers.

A Study on the Remote Control System for Outboard Engine (선외기 원격제어시스템에 관한 연구)

  • An, Byeong-Won;Jeong, Gap-Dong;Kim, Hyeon-Su;Bae, Cheol-Oh
    • Proceedings of KOSOMES biannual meeting
    • /
    • 2006.11a
    • /
    • pp.71-74
    • /
    • 2006
  • Currently offshore fisheries are one of shrinking industries and fishermen are getting older. Moreover it is difficult to work fisheries for decreasing fishermen as the time goes. Two people per a boat work together at least for proper fisheries. If the unskilled fisherman boards on boat, it will make some troubles to speak each other and diminish the efficiency of working because one person should control the boat. So it need to study the remote control system for leasure and outboard engine that can control and work at the same time. The remote control system is consisted of engine revolution, steering gear and forward reverse neutral gear controls. These three controls are made by position and speed control using DC motor, and microprocessor is used to communicate and control the engine speed This system can be controled and worked alone and we tested the system at sea and confirmed that the system works properly.

  • PDF

Distribution and Migration of Flying Squid, Ommastrephes bartrami (LeSueur), in the North Pacific (북태평양에 있어서 빨강오징어 Ommastrephes bartrami (LeSueur)의 분포 및 회유)

  • GONG Yeong;KIM Yeong Seung;KIM Soon Song
    • Korean Journal of Fisheries and Aquatic Sciences
    • /
    • v.18 no.2
    • /
    • pp.166-179
    • /
    • 1985
  • The seasonal distribution and migration of flying squid, Ommastrephes bartrami (LeSueur), in the North Pacific were studied by means of mantle length, surface temperature, and catch and effort data of the Korean drift gillnet fishery from 1980 to 1983. The water temperature for the best fishing ranged from $15^{\circ}\;to\;16^{\circ}C$ in May through July and from $13^{\circ}\;to\;18^{\circ}C$ in August through January. High densities of flying squid were found in the thermal fronts with $18^{\circ}C$ isotherm in August and with $15^{\circ}C$ isotherm in September. The densities of flying squid were higher in the western region than in the eastern region in the North Pacific. The high densities of flying squid in the northwestern Pacific were attributed to the high gradients of oceanographic properties in the region. Migration models for flying squid were hypothesized based on the monthly distributions of catch per unit net, mantle length compositions by statistical blocks, and the hydrographic features of the North Pacific. The large flying squid moved to the northern region and to the central Pacific region earlier than the small sized group in the northward migration period (from June to August). Flying squid begin the reverse southward migration from the Subarctic Frontal Zone in autumn with onset of cooling and the development of Oyashio Current. The large sized group starts their southward return migration from more northern waters than the small sized group but the former moves past the later ana reaches the spawing ground first.

  • PDF

Development of Tuna Purse Seine Fishery in Korea and the Countries Concerned (한국(韓國) 및 관련각국((關聯各國)의 다랑어 선망어업(旋網漁業) 발달과정(發達過程))

  • Hyun, Jong-Su;Lee, Byoung-Gee;Kim, Hyoung-Seok;Yae, Young-Hee
    • Journal of Fisheries and Marine Sciences Education
    • /
    • v.4 no.1
    • /
    • pp.30-46
    • /
    • 1992
  • Korea's first exploratory tuna fishing was done with a used longliner in 1957. Then the commercial fishing has been made steady headway since the 1960's and grown up to one of major tuna fishing countries in 1970's. The tuna fishing aimed primarily at acquiring foreign currency, then tuna was exported directly from the overseas fishing base. Tuna, however, has been gradually favored by Koreans as high-proteined foods according to the growth of GNP since the 1970's. In 1980, the canned tuna began to be produced and sold at home. And so the demand of raw tuna for cannaries has steeply increased not only for home but also for abroad, and stimulated the development of tuna purse seine fishery. The author carried out a study on the development of tuna purse seine fishery in Korea and countries concerned-the United States and Japan-because it is recognized to be significant for the further development of this fishery. Just as purse seining was originated in the United States, so tuna purse seining was also pioneered by Californian fishermen in the west coastal waters of the United States (Eastern Pacific Ocean). They started to produce the canned tuna in the early 1900's, and the demand for raw tuna began to be increased rapidly. In those days, tuna was mostly caught by pole-and-line, but the catch amount was far away from the demand. To satisfy this demand, they began to try out fishing tuna by the use of purse seine which had been born in the eastern waters in the 1820's and applied to catch white fishes in the western waters of the United States in those days. Even though their trial was technically successful through severe trial and error, a new problem was raised on the management of tuna resource and the preservation of porpoise which was occassionally caught with tuna. Then the Inter-American Tropical Tuna Commission (IATTC) was established by countries neighboring to the United States in 1950 and they set up the Commission's Yellowfin Regulatory Area (CYRA) and regulated the annual quota for yellowfin. Then, American owners tried to send their seiners to the Western African waters to expand the fishing ground in 1967 and to the Centeral-Western Pacfic in 1974, and the fishing ground was widely expanded. The number of the United States' purse seiners amounted to about 150 in 1980, but the enthusiasm was gradually cooled thereafter and the number of seiner was decreased to 67 in 1986. The landing of tuna by purse seiners in the United States after 1980 maintains 200 thousands M/T or so with a little increase despite the decreasing of domestic seiners. This shows that the landing by foreign seiners are increasing, compared with the landing by domestic seiners are decreasing. In Japan, even though purse seining was introduced in 1880, they had fished tuna by longline and pole-and -line until the tuna purse seining was introduced from the United States again. In the 1960's, Japanese tuna seiners made the exploratory fishing in the South-western Pacific and West African waters with a limited success. In 1971, the government-funded research center "JARMRAC" conducted the exploratory fishing which extended to the Central American waters, the Asia-Pacific Region and the South-western Pacific. It had also much difficulties, till they improved the fishing gear adaptable to the new fishing condition in the South-western Pacific. Japanese government has begun to licence 32 single seiners and 7 group seiners since 1980 and their standard has lasted up to now. The catch in the Pacific Islands Region amounted to 160 thousands M/T in 1986. Korea's tuna purse seine fishery was originated in 1971 by Jedong Industrial Co., Ltd. with three used tuna purse seiners purchased from the United States, and they began to fish in the Eastern Pacific, but failed owing to the superannuation of vessel and the infancy of fishing technique. The second challenge was done by Dongwon Industrial Co., Ltd. in 1979, with one used seiner purchased from the United States, and started to fish in the Eastern Pacific. Even though the first trial was almost unsuccessful but they could obtain the noticeable success by removing the vessel to the South-western Pacific in 1980. This success stimulated the Korean entherprisers to take part in this fishery, and the number of Korean tuna purse seiners has been increased rapidly in accordance with the increased demand for raw tuna. The number of vessels actually at work amounted to 36 in 1990 and they operate in the South-western Pacific. The annual catch of tuna by purse seiners amounted to 170 thousands M/T in 1990 and ranked to one of the major tuna purse seining countries in the world.

  • PDF