• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 추계학술대회 논문집 학회본부 A
• /
• pp.406-408
• /
• 1999

In order to reduce the overall size and cost, researchers attempted to integrate the functions of power factor correction(PFC) and isolated dc-dc conversion into single power stage. However, single-stage isolated PFC converters have higher voltage stress and heavier loss when compared with a normal dc-dc converters. In this paper, we propose to add active clamping circuit to keep the switch voltage stress low and to achieve soft switching of electronic devices.

• 한국방송∙미디어공학회:학술대회논문집
• /
• 한국방송공학회 1998년도 학술대회
• /
• pp.103-106
• /
• 1998

본 논문에서는 전이중(full duplex)으로 동작하는 멀티미디어 PC의 음성 명령어 인식기의 성능 향상을 위한 적응 음향 반향 제거기를 구현하였다. 최근 들어 일고 있는 인간과 컴퓨터의 인터페이스를 쉽고 친밀하게 하려는 노력은 음성으로 제어하는 컴퓨터의 탄생을 예고하고 있다. 이러한 시스템을 전이중 모드에서 사용할 경우 음향 반향은 피할 수 없는 현상이다. 본 논문에서는 이러한 음향 반향을 제거하기 위해서 서브밴드 적응 필터 구조를 이용하여 실시간 처리가 가능한 음향 반향 제거기를 설계하였다. 또한, 동시통화시 음성의 왜곡을 줄이는 스위칭 구조를 사용하였다. 동시통화의 검출은 상호상관도를 이용하여 구현하였다. 이렇게 구현된 반향제거기를 음향 입출력 루틴과 음성 인식기와 결합하여 Windows 95상에서 실시간으로 동작하는 음성 명령어 인식 소프트웨어를 완성하였다. 모의 실험 및 실시간 실험을 통하여 반향 제거기의 성능을 검증하였고, 음성인식 실험을 수행하여 반향 제거기가 인식율 향상에 기여함을 확인하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 하계학술대회 논문집 F
• /
• pp.1954-1956
• /
• 1998

The three-level voltage source inverter (VSI) is good topology for high voltage and high power applications where no semiconductor devices are available. However, it has an inherent problem of switching loss and midpoint charge balance. Therefore, this paper presents two ways. The one is to adopt ZCT soft-switching method to the conventional three-level VSI. The another is to be proposed the method of the midpoint charge balance in three-level VSI. To prove the proposed topology, the paper presents a comprehensive evaluation with theoretical analysis, simulation and experimental results.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2008년도 하계학술대회 논문집
• /
• pp.28-30
• /
• 2008

This paper proposes soft switching boost converter operating in zero current switching(ZCS) mode for photovoltaic and fuel cell power generation. The proposed topology is capable of reducing the size, and capability of passive element by using soft switching, and it allows for reduction of IGBT switching losses, for the increased of switching frequency. A detail mode analysis of operating in presented. We present the converter topology, principle of operation and simulation results obtained from the PSIM simulator. The performance of the proposed technique in evaluation on 1kW(380V,2.6A) experimental prototype circuit operating at 30kHz.

• 전기학회논문지P
• /
• 제66권2호
• /
• pp.58-62
• /
• 2017

This paper presents a novel prototype of the resonant AC link snubber circuit for the three-phase sinwave soft-switching PWM inverter. In principle, its operating principle is described, and the performance evaluations of the specific instantaneous space voltage modulated three-phase sinewave soft switching PWM inverter incorporating a resonant AC link snubber is illustrated, and evaluated, introducing the specific space voltage vector modulation implementation. It is conferred that the validity of three-phase soft-switching inverter treated here in setup experiment.

• 전력전자학회논문지
• /
• 제20권4호
• /
• pp.313-320
• /
• 2015

This study deals with a bidirectional interleaved soft switching DC-DC converter for a wide range of input voltages. The proposed converter operates in complementary switching with the purpose of inductor size reduction and zero-voltage switching (ZVS) operation. The current ripple related to complementary switching is minimized by three-phase interleaved operation. The main characteristics of the proposed topology are its soft-switching method of operation and its simple structure. The soft-switching operation and the system efficiency of the proposed converter are verified by experimental results.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2019년도 추계학술대회
• /
• pp.118-119
• /
• 2019

본 논문은 유연전극의 플라즈마 반응을 위한 고효율 전원장치에 대한 연구이다. 유연전극은 저온 플라즈마 방전으로, 수 kV의 AC형태의 고전압 및 소전력 구동 사양이 요구된다. 상용전원을 사용하는 유연전극용 고전압 전원장치는 AC-DC, DC-AC로 변환이 가능한 2단 구조를 갖는다. 1단은 낮은 전력에서 높은 효율을 달성 할 수 있는 CrM(Critical Conduction Mode) PFC와 전부하 영역 소프트 스위칭을 통해 고효율 달성이 용이한 LLC 공진 컨버터를 사용하였다. 유연전극은 사양에 따라 커패시턴스가 달라진다. 따라서, 본 논문에서는 유연전극 사양에 따른 공진 주파수의 최적화를 통해서 유연전극의 플라즈마 반응 및 특성 시험을 위해 고효율 전원장치를 구성하였다. 실험을 통해서 유연전극용 고효율 전원장치를 검증하였다.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제50권9호
• /
• pp.473-478
• /
• 2001

In this paper a soft switching ZVT(Zero Voltage Transition) power factor converter using active snubbers is designed to improve efficiency and reduce voltage spike and parasitic ringing. The main switch achieves ZVT and the auxiliary switch operates with ZCS. A 2KW soft switching ZVT converter is designed with switching frequency 100kHz, output voltage 400VDC. Then the designed system is realized and experimental results show that the measured efficiency and power factor are over 97.45% and 0.997 respectively with an input current THD less than 3%.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 B
• /
• pp.1215-1217
• /
• 2000

For the application of soft-switching technique to single Phase-full bridge inverter. in this paper ZCT(Zero Current Transition) and ZVT(Zero Voltage Transition) techniques proposed previously are compared and discussed the merit and demerit of both. Both have a excellency that can reduce the number of auxiliary switch and resonant circuit compared to other techniques and achive soft-switching in auxiliary switch itself. Therefore, it has enabled us to have benifits of realizing high efficiency and reliability, low EMI for high switching frequency and reducing the cost as well as size of device.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 B
• /
• pp.1212-1214
• /
• 2000

A new soft-switching PFC-Inverter for Induction Motor's operation with single phase or three phase medium size is proposed. In order to improve the power factor and the efficiency, in this paper, the ZVT topology in the conventional PFC-Inverter is adopted. So, the operation mode of the proposed ZVT PFC-inverter is analyzed and the optimum circuit is designed. At last, the PSPICE simulation and experiment results are presented in order to verify the validity of the proposed circuit.