• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2014년도 춘계학술대회 논문집
• /
• pp.706-707
• /
• 2014

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2009년도 춘계학술대회 논문집
• /
• pp.338-339
• /
• 2009

• 소음진동
• /
• 제10권5호
• /
• pp.806-810
• /
• 2000

This paper presents a practical method for reduction of interior noise and improvement of sound quality in compartment of passenger car. The tested vehicle has a booming noise problem at rear passenger seats. In order to identify the transfer path of interior noise, the running modal analysis, the vibro-acoustic frequency transfer response and the noise path analysis are systematically employed. Using these various methods, it has been founded that the rear part of the roof of the test car was a noise source for the booming noise. Through the modification of the roof, the booming noise has been reduced and sound quality inside car also has been improved.

• 한국철도학회논문집
• /
• 제16권1호
• /
• pp.14-19
• /
• 2013

고속철도차량의 실내소음은 승객에서 불쾌감, 피로감 및 스트레스를 유발하는 요인으로 이에 대한 지속적인 연구가 필요하다. 특히, 고속철도 차량이 개활지와 터널 등 다양한 주행환경에서 운행되고 있는 우리나라 현실에서는 이러한 환경에서의 실내소음 변화에 대한 구체적인 연구가 필요하다. 따라서, 본 연구에서는 현재 우리나라에 운영되고 있는 고속철도 차량에 대한 실내 소음의 특성을 분석하는 연구를 수행하였다. KTX와 KTX-산천 차량의 실내에 마이크로폰을 설치하여 주행 시 발생하는 실내소음을 분석하였으며, 축상, 대차 및 차체 가속도 센서를 설치하여 구조기인의 원인이 되는 진동을 검토하였다. 본 연구를 통해서 고속철도 차량의 속도에 따른 실내소음의 특성이 도출되었으며, 주행 환경이 실내소음에 미치는 영향을 개활지와 터널주행 시 발생하는 실내소음의 차이를 통해서 검토하였다. 또한, 차체진동과 실내소음에 대한 전달함수분석을 통해서 차체진동이 실내소음에 미치는 영향을 검토하였다.

• 한국소음진동공학회논문집
• /
• 제23권1호
• /
• pp.56-64
• /
• 2013

Turbulent boundary layer noise is already a significant contributor to sonar self noise. For developing acoustic window of sonar system to reduce self noise, a parametric study of design factors of acoustic window is presented. Distance of sensor array from acoustic window, materials of acoustic window and characteristics of damping layer are studied as design factors to influence in the characteristics of the transfer function of self noise. As the result, these design factors make change the characteristics of transfer function slightly. Among design factors the location of sensor array is most important parameter in the self noise reduction

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2010년도 추계학술대회 논문집
• /
• pp.340-341
• /
• 2010

Noise reduction is an important factor to design low noise sensor array. In this paper three layers of the de-coupler in the conformal sensor array were used to investigate noise reduction. Conformal sensor array is positioned in the layers and the distance from the layer is 0.25cm~1.5cm. Transfer function in the frequency density function is investigated according to the three different positions. When increasing the embedded distance the flow noise decreased in the region of the kx>10.

• 한국자동차공학회논문집
• /
• 제5권4호
• /
• pp.84-92
• /
• 1997

Among the various sources of vehicle interior noise, this paper concerns the road induced noise ; the identification of its transfer path by using experimental method. Multiple input and single output model is taken as a noise generation model. Because it is impossible to measure the road imput forces directly, the acceleration signals are measured on four axle;three directions for each point. By considering the cross correlations of input signals, four uncorrelated source groups are taken. Multiple coherence function is employed to investigate the contribution of each group. In addtion, to identify the detailed path through the suspension systems, the contributions of all possible paths are ranked by using the coherence functions between interior noise and the relative accelerations of connections such as bushings and mountings. Measurements are performed with passenger vehicle traveling on concrete and asphalt roads at 60㎞/h.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2014년도 추계학술대회 논문집
• /
• pp.336-340
• /
• 2014

The noise and vibration have been evaluated by using the finite element model in the vehicle developing stage. The sound pressure of the vehicle compartment is predicted by the acoustic cavity model coupled with the body structure. In general, the structural model has been focused to study in the improvement of the noise. It is not easy to treat the structural model, instead the acoustic cavity model is relatively simple and aids in root cause analysis of vibro-acoustic issues. Therefore, the acoustic transfer function of the cavity is more efficient for finding out the main contribution parts of the vehicle booming noise. And examples about the run-up booming noise demonstrate the validity of the AFT analysis for improving the vibro-acoustic sensitivity.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2007년도 추계학술대회논문집
• /
• pp.997-1004
• /
• 2007

A hybrid technique that combines the advantages of binaural reproduction and sound field reproduction technique is proposed. The concept of HRTF-field, which is defined as the set of HRTFs corresponding to the various head dislocations, enables us to realize virtual source imaging over a wide area. Conventional $2{\times}2$ definition is redefined as a MIMO system composed of multiple control sources and multiple head locations, and HRTF variations corresponding to various head movement are quantified. Through the direct control of HRTF-field, reproduction error induced by head dislocation can be minimized in least-square-error sense, and consequential disturbances on the virtual source image can be reduced within a selected area. Simple lateralization examples are investigated, and the reproduction error of the proposed technique is compared to that of Higher-order Ambisonics.

• 한국소음진동공학회논문집
• /
• 제18권8호
• /
• pp.841-848
• /
• 2008

Based on the averaged Korean head shapes that are the results of digital Korean project by KISTI and Catholic university, experimental apparatus of head dummies of Korean male and female are developed in order to measure head-related transfer functions(HRTF) by using a reverse engineering and rapid prototyping techniques. For the Korean dummies, HRTFs are measured using the substitution method ever 12kHz frequency bands. At every azimuth angle $15^{\circ}$ HRTFs are measured for elevation angles $-30^{\circ}$, $0^{\circ}$ and $-30^{\circ}$. The measured HRTFs are compared with those of KEMAR(knowles electronic manikin for acoustic research) dummy head, which shows $3{\sim}5\;dB$ difference over $4{\sim}5\;kHz$ kHz frequency band.