• 한국자동차공학회논문집
• /
• 제9권1호
• /
• pp.181-188
• /
• 2001

The evaluation of the noise for the an existing engine was carried out to improve the current noise level. The applied techniques were 1m air-borne noise, combustion noise analysis, torsional analysis at the front pulley and sound pressure intensity. In addition, the evaluation of the possibility to the noise reduction by means of wrapping the parts was performed to propose the detailed information in engine design. In view of the obtained results, the following countermeasures were recommended to reduce the current noise level through the above methods. Furthermore, in order to assess the influence of combustion noise on the overall engine noise, the noise test was also performed by the change of intake air temperature up to 5$0^{\circ}C$ in steps of 1$0^{\circ}C$. Finally, the fixed design specifications to reduce the engine noise will be decided in consideration of the test data for proto type engine.

• 대한기계학회논문집
• /
• 제15권6호
• /
• pp.1819-1830
• /
• 1991

본 연구에서는 구조물이 순수한 선형계인 경우에 국한하여 선형 구조물의 여 러지점에서 측정한 신호들을 기존의 방법과 같이 다중입력으로 간주하고 선형 구조물 로부터 방사된 소음, 즉 관측자의 위치에서 측정한 신호를 출력으로 가정한 두 부분 기여도 함수를 적용하여 소음/진동원을 규명하였을 때 발생하는 결과를 이론적으로 해 석하여 보았다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2007년도 추계학술대회논문집
• /
• pp.1366-1370
• /
• 2007

Predicting the noise radiated from vibrating structures is important in the automotive, aerospace, construction equipment, and defense industries. In this paper, a numerical implementation of the boundary element method in solving the Helmholtz integral equation for radiated noise prediction is presented. To predict the noise emitted by vibrating structure, the developed code can use the results from a structure analysis performed by a multi-purpose structural finite element code like ANSYS and directly measured data by non-contact vibration sensor like Laser Doppler Vibrometer. To verify the accuracy of developed code, two kinds of verification are perfomed. Firstly, the computer code used the harmonic analysis results of ANSYS in simple model and try to match with SYSNOISE. After matching with simulation results, the code compared with the result from SYSNOISE which used the velocity data from the LDV measurement with different number of points. The performance of the developed code for vibro-acoustic noise prediction is presented using the experimental results of the non-contact sensor

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2007년도 추계학술대회논문집
• /
• pp.1476-1481
• /
• 2007

Numerical investigation on radiation characteristics of discrete frequency noise from asymmetry aero-intakes was carried out. The near-field predictions were obtained by solving the linearized Euler equations with computational aeroacoustic techniques consisting of high order finite difference scheme, non-reflecting boundary conditions, oversetgrid techniques. For the prediction of far-field directivity pattern, the Kirchhoff integral method was applied. By comparing the directivities of noise radiating from the scarf and the scoop aero-intakes with that from an axisymmetric aero-intake, it is shown that noise reduction at downward peak radiation angle can be achieved. The scattering of the radiating acoustic wave by background mean flow shifts the peak lobe radiation angle toward ground and increases the amplitude of the acoustic pressure compared with the cases without mean flow effect.

• 소음진동
• /
• 제7권3호
• /
• pp.427-437
• /
• 1997

Mean active intensity based active control for the cancellation of radiated noise out of the duct exit is studied. The active intensity control strategy is drerived based on the relation of the exterior sound field out of the duct termination and interior sound field of the duct. One of the characteristics of this control strategy is that the control performance can be maintained regardless of the sensor loction, compared with the conventional local pressure control methods at either interior downstream or exterior field positions. It is also suggested that the digital filtering for the active intensity control can be achieved by time-domain filtered-x LMP (Lest-Mean-Product) adaptive algorithm. Experiments for an open-ended duct are performed to compare the active intensity control performance with conventional pressure control one. Active control experiment of local sound pressure is conducted by widely used filtered-x LMS adaptive Algorithm and active intensity control implementaion uses the derived filter d-x LMP algorithm. It is shown that the exterior sound fileds was much better observable by sensing of the active intensity than by just sound pressure. It is also demonstrated that the global control performance of external field by acoustic intensity is superior to the conventional sound pressure control performance.

• 한국음향학회지
• /
• 제14권2호
• /
• pp.80-91
• /
• 1995

타이어와 노면의 상호작용에 의해 발생하는 소음에 대한 이론적인 모델에 대하여 연구하였다. 모델은 레디얼 타이어의 벨트 운동을 얇은 셀 방정식들로 가정하고 Bohm이 유도한 운동방정식을 기초로 하였으며 이들 방정식에 요구되는 구조적인량은 타이어의 재질적인 특성을 기초로 유도하였다. 타이어의 회전형태는 이들 방정식들의 정상상태로 부터 계산되고 진통 응답은 전체 종속적인 셀 방정식에 의해 구하였다. 타이어 노면 접지면에서의 힘은 타이어 트레드의 기하학적인 형상과 접지압의 분포를 기초로 계산하였고 소음방사는 심프슨 적분에 의해 계산된다. 여러가지 설계인자의 변화에 대한 효과를 조사하여 저소음 타이어 설계의 기초자료를 확보하는데 목적이 있다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 춘계학술대회
• /
• pp.2066-2070
• /
• 2003

This experimental study describes the propagation characteristics and suppression of the impulse noise emitted from the exit of a perforated pipe attached to the open end of a simple shock tube. The experiment is performed through the systematic change of the shock wave Mach number and the geometrical parameters such as the porosity, hole diameter and length of the perforated pipe. The experimental results for the near and far sound field are presented and explained in comparison with those for a straight pipe. The results obtained show that for the near sound field the impulse noise strongly propagates toward to the pipe axis, but for the far sound field the impulse noise uniformly propagates toward to the all directions, indicating that the directivity pattern is almost same regardless of the pipe type. Moreover, the noise reduction performance of perforated pipe depends upon the condition of sound field. For the near sound field the perforated pipe has a little performance to suppress the impulse noise, but for the far sound field the perforated pipe has little performance to suppress the impulse noise.

• 한국소음진동공학회논문집
• /
• 제26권7호
• /
• pp.836-843
• /
• 2016

This study investigates the vibro-acoustic characteristics of an automotive brake drum given free boundaries using the hybrid approach combining numerically obtained structural properties with analytical solution for acoustic radiation. Structural vibrations of the drum are investigated with the finite element method, and modal displacements on the outer surfaces of the drum are idealized as simple mathematical expressions. Based on the expressions, modal sound radiations of the drum are calculated using the Rayleigh integral method. Structural and acoustic responses of the drum for a harmonic excitation are obtained from above results using the modal expansion technique. The results are confirmed with numerical analyses using the boundary element method. Based on these results, it can be concluded that the vibro-acoustic characteristics of a brake drum can be accurately investigated with the process used in this study. Also, many noise and vibration problems in drum brake can be addressed using the procedure proposed in this study.

• 소음진동
• /
• 제10권4호
• /
• pp.669-678
• /
• 2000

This paper reviews the improved moving frame acoustic holography (MFAH) method and its application. Moving frame acoustic holography was originally proposed to increase the aperture size and the spatial resolution of hologram by using a moving line array of microphones. The hologram of scanned plane can be obtained by assuming the sound field to be product of spatial and temporal information. Although conventional MFAH was only applied to sinusoidal signals, it allows us to visualize the noise generated by moving noise sources by employing a vertical line array of microphones affixed to the ground. However, the sound field generated by moving sources becomes different from that of stationary ones due to the movement of the sources. Firstly, this paper introduces the effect of moving noise sources on the obtained hologram by MFAH and the applicability of MFAH to the visualization of moving sources. Secondly, this paper also reviews improved MFAH that can visualize a coherent narrow band noise and a pass-by noise. The practical applicability of the improved MFAH was demonstrated by visualizing tire noise during a pass-by test.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 1995년도 추계학술대회논문집; 한국종합전시장, 24 Nov. 1995
• /
• pp.56-61
• /
• 1995

많은 공학자들은 기계 재료의 종류 및 형태에 따른 정적, 동적 특성 연구를 수행해 왔다. 특히 산업적으로 그 활용도가 높은 평판 재료에 대한 진동 특성 연구는 많이 이루어졌다. 최근에는 진동 특성을 해석하는 방법도 부분구조합성법, 감도해석법 등의 방법으로 연구가 활발히 이루어지고 있다. 한편 평판의 진동이 공기와 같은 매질로 상호 작용을 하며, 막힘이 없는 공간으로 음향을 방사하는 현상에 대한 연구도 이루어지고 있다. 그러나 평판 재료를 사용하여 기계 구조물을 제작하는 경우 많은 경우에 구조물간 결합에 의해 폐공간이 형성되고 이러한 폐공간에 의해 평판의 진동이 구조-음향 연성 현상이 발생되고, 이에 따라 평판의 진동 특성도 달라지게 된다. 이러한 구조-음향 연성에 대한 연구는 1978년 Wayne B.McDonald와 C.Kearney Barton, 1979년 R.Vaicatis에 의해 폐공간 내로의 음향 전달 현상을 연구하며 이루어졌다. 최근에 연구 동향은 이장명의 FEM과 BEM을 이용한 폐공간 내로의 음향 전달 현상을 연구하였고, V.B.Bokil에 의해 구조-음향 연성된 평판의 모드 해석 방법이 연구되었다. 한편 V.Martin에 의해 능동 소음 제어의 모델링을 좀더 정확히 하기 위해 구조 연성계를 고려한 연구도 수행되었다. 연구 결과 구조-음향 연성에 의한 평판의 고유진동수 변화를 구하였고 이 때에 경계조건을 만족하는 직교다항식을 이용한 Rayleigh-Ritz 방법을 이용하였다. 또한 이러한 해석은 실험과도 매우 잘 일치함을 알 수 있었다.