• 소음진동
• /
• 제7권6호
• /
• pp.919-929
• /
• 1997

Induction motors are used in many areas to transform electrical energy to mechanical energy. In the design of an induction motor, not only energy efficiency but also noise becomes an important factor. To effectively address the noise problem, it will be convenient if one can see where and how noise is generated and propagated. In this study sound radiation by an induction motor is visualized using cylindrical acoustic holography. To minimize the bias error by window effect Minimum Error Window(MEW) is used. Its performance is verified by numerical simulations. Based on these theoretical understanding, sound pressure measurement with an induction motor are performed. Not only sound radiation are visualized but sound pressure level and sound power level are also estimated. Results show that the main source is located at nearly bottom part of the motor and the total sound pressure level is 49dB, which satisfies the guideline value suggested by the KS C 4202.

• 한국음향학회지
• /
• 제17권7호
• /
• pp.61-73
• /
• 1998

라우드스피커의 비선형 음향특성을 해석하기 위하여 라우드스피커 다이아프램의 비 선형특성을 실험적으로 분석하였다. 라우드스피커를 집중질량계로 모델링하고, 출력소음이 없을 때 적용이 가능한 하모닉 발란스법과 출력소음이 있을 때도 적용할 수 있는 통계적 방 법인 라그란지 배수법을 사용하여 비선형 매개변수를 규명하였다. 70Hz 이하의 주파수 영역 에서는 라그란지 배수법이 2차 하모닉 왜곡특성에서 상대적으로 좋은 결과를 보였으며, 3차 하모닉 왜곡특성에서는 하모닉 발란스법이 실험결과와 잘 일치하였다. 전압가진 및 전류 가 진실험을 통하여, 일반화된 주파수 응답함수를 유도하였고 하모닉 왜곡 및 상호변조 특성을 고찰하였다. 고차 주파수 응답특성은 라우드스피커 비선형 매개변수의 변동에 따른 다이아 프램의 비선형특성을 해석하는데 유용한 수단이 될 수 있음도 확인하였다.

• 한국음향학회:학술대회논문집
• /
• 한국음향학회 2004년도 추계학술발표대회논문집 제23권 2호
• /
• pp.397-400
• /
• 2004

소음원 또는 방사음장을 가시화하기 위하여 소음원을 둘러싸는 한 면에서의 음압측정을 통해 임의의 3차원 공간상의 음향 물리량을 예측하는 음향 홀로그래피 방법이 사용되고 있으며 이때 반사파가 존재하지 않는 기본 가정을 만족해야 한다. 반사파가 존재하는 경우에는 반사파를 보정하거나 또는 반사파의 음장이 미치는 영향이 무시할 만큼 작다고 가정하여 음장 예측이 가능하게 된다. 최근 해양연구원에서는 음향 홀로그래피 방법을 이용하여 수중음장을 가시화하는 시스템을 개발하였으며 시스템 검증을 위해 무향수조 내 단순음원을 이용하여 음장예측을 수행하였다. 무향수조 표면에는 흡음처리가 되지 않아 표면 반사파가 존재하나 해석 결과 반사파의 영향이 작은 경우에는 반사파를 무시하고 음장해석의 수행이 가능함을 확인하였다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 추계학술대회논문집
• /
• pp.268-272
• /
• 2002

A study to determine the structure-borne noise radiated by a dash panel of a real car is performed by using the finite element method (FEM) and the boundary element method (BEM). The radiation efficiency is used to estimate the structure-borne noise radiated by a dash panel. The curved surfaces of a dash panel change the radiation efficiency. Experimental results of radiation efficiency of a simple rectangular plate and a dash panel show good agreements with the simulation results.

• 한국정밀공학회지
• /
• 제18권9호
• /
• pp.204-209
• /
• 2001

The finite element model for automotive muffler analysis is improved by modifying the boundary condition of outlet and the mesh of finite element model. The model minimizes the difference between transmission loss from analysis and that from experiment. Four different boundary conditions and the four types of finite element model are tested to find out the best one of those. From the case study it is verified that the bevel of transmission loss can be changed by the variation of radiation impedance value. Also the resonance or anti-resonance frequencies of transmission loss can be shifted by the variation of finite element mesh. An improved finite element model of muffler is proposed in consideration with the accuracy and the computing time of analysis.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2008년도 춘계학술대회논문집
• /
• pp.25-28
• /
• 2008

This study investigates the effect of geometrical shape of concert halls, with variation in the shape and location of diffusers. The acoustical characteristics both in the audience area and on the stage 1:50 scale models of shoebox and fan-shaped halls. It was found that the front side walls affect sound diffusion. The 1:50 scale model based on the Boston Symphony Hall was used for monaural impulse response measurements for calculation of RT, EDT, C80, G and ST1. In addition, calculating the numbers and amplitudes of reflection rays were applied to quantify diffusion phenomena.

• 한국유체기계학회 논문집
• /
• 제5권1호
• /
• pp.13-19
• /
• 2002

In the present study, a numerical simulation is performed for the flow through a cooling fan. The computation was performed by using commercial code, STAR-CD. A rotating fan was simulated by rotational motions using MRF (Multiple Rotating Reference Frame) in a steady-state analysis and sliding interface (rotating meshes) in an unsteady-state analysis. The results of numerical computation were in good agreement with experimental data. In order to calculate the acoustic signal, the unsteady flow-field was firstly calculated. The acoustics of the fan is calculated by using acoustic analogy based on the unsteady flow-field. The predicted acoustic signal shows the characteristics of the uneven bladed-fan.

• 대한기계학회논문집B
• /
• 제21권6호
• /
• pp.779-792
• /
• 1997

Flow characteristics are numerically investigated when a packet of waves consisting of a Tollmien-Schlichting wave and a pair of Squire waves evolves in a flat-plate laminar boundary layer using a large eddy simulation with a dynamic subgrid-scale model. Characteristics of early stage transitional boundary layer flow such as the .LAMBDA. vortex, variation of the skin friction and backscatter are predicted. Smagorinsky constants and the eddy viscosity obtained from the dynamic subgrid-scale model significantly change as the flow evolves. Far Field noise radiated from the transitional boundary layer shows the dipole and quadrupole characteristics owing to the wall shear stress and the Reynolds stresses, respectively.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 추계학술대회논문초록집
• /
• pp.332.1-332
• /
• 2002

The study was performed as reduction method using finite and boundary element analysis on structure-borne noise radiated by dash panel of a real car. The radiation efficiency is used to estimate sound noise of dash panel. Curvature and edges of dash panel have effect on radiation efficiency. The simulation results of dash panel was ensured by comparison between experimental results and simulation results of a simple rectangular plate. (omitted)

• 소음진동
• /
• 제6권6호
• /
• pp.781-790
• /
• 1996

The goal of current research is to suppress the acoustic noise radiated from vibration of composite plate structure. The induced noise can be reduced through the control of the corresponding structural vibration modes by using the piezoelectric materials as actuator. The acoustic fields are to be analyzed through the boundary element method (BEM) based on the Rayleigh intergral equation and structural system through the finite element method (FEM). The suppression of rediated sound is studied by adaping the piezoelectric material as the distributed actuator. Numerical results are presented on the sound radiation from composite plate of arbitrary boundary conditions, the noise reduction adapting the piezoelectric materials as distributed actuator. The results show the effectiveness and possibility of piezoelectric actuator in the control of sound radiation from composite structure.