• Proceedings of the Acoustical Society of Korea Conference
• /
• 1985.10a
• /
• pp.50-53
• /
• 1985

한국연안에서 높게 보고되고 있는 수중소음의 소음원규명을 위하여 일차적으로 해상교통량에 그 초점을 맞추었다. 100Hz 부근의 소음은 이미 잘 알려진대로 선박에 기인함이 실험결과에서도 드러났지만, Wenz의 천해수중소음 모델 중 heavy shipping때보다 10-20dB 높게 관측되었다. 200Hz 이상에서의 소음은 선박분포에 따른 평균소음값에 큰 차이를 보이지 않았지만, 선박들의 거리 변화율이 심한 근거리에 다수의 선박이 분포해 있을 경우는 10분간격의 소음값이, 특히 1KHz 이상에서 최고 10dB까지 변화를 보였다. 이것은 이 주파수대역에서 연근해의 밀집해 있는 선박들이 하나의 소음원으로서의 역할을 함을 의미한다.

• Journal of the korean Society of Automotive Engineers
• /
• v.8 no.4
• /
• pp.43-55
• /
• 1986

In the studies of noise reduction, it is important to know the generation mechanism of noise in order to identify the noise source. The relation between the structural vibration and the radiated sound is very complex and so this paper deals with a simplified radiation model that was originally developed as a verification tool for the acoustic intensity measurement procedure. As the first step for the identification of the noise source, this study deals with the noise evaluation by measuring sound pressure. On the next step, the acoustic radiational pattern is determined by the acoustic intensity method and this paper established that the acoustic intensity method is effective on the detection of noise. In the study, furthermore, the method could be used to predict the change in the sound radiational characteristics with the attachment of absorber and could be used in determining the attachment position.

• The Journal of the Acoustical Society of Korea
• /
• v.20 no.2
• /
• pp.86-92
• /
• 2001

Various array processing techniques to identify the noise source position or bearing have been developed. Typical array processing techniques which are based on time delay between received signals at two sensors, are classified as conventional beamforming, correlation function and NAH (Near-Field Acoustic Holography) techniques which have their own characteristics with respect to application field and signal processing method. In this study, correlation function technique which could be applied for broadband noise source detection, is adopted and the effective detection technique is proposed considering the effects of source bandwidth and measurement noise correlation of noise sources. The validity of the Proposed technique is evaluated using the 3-dimensional nonlinear any which does not give 3-dimensional Position or bearing ambiguity

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.25 no.11
• /
• pp.723-730
• /
• 2015

This paper investigated the noise generation mechanism of a rotary compressor using experimental method. The measurement was carried out for primary parameters which influence noise characteristics. By using STFT(short time Fourier transform), noise sources of a rotary compressor were identified and vibrating modes that increase the noise are verified. Also, it was studied that the correlation between operating speed and noise. Main factors that affect the variation of noise level were considered by the comparison of the experimental results. In addition, a dynamic characteristic of crank shaft was studied and the critical speed was analyzed.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2014.10a
• /
• pp.753-759
• /
• 2014

In this paper, it is investigated that noise generation mechanism of a rotary compressor using experimental method. The measurement was carried out for primary parameters which influence noise characteristics. By using STFT(short time fourier transform), noise sources of a rotary compressor were identified and vibrating modes that increase the noise are verified. Also, it was studied that the correlation between operating speed and noise. Main factors that affect the variation of noise level were considered by the comparison of the experimental results. In addition, a dynamic characteristic of crank shaft was studied and the critical speed was analyzed.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2008.11a
• /
• pp.650-651
• /
• 2008

In this thesis, source identification tool for NI-PXI equipment is developed with LabVEIW. For the purpose of examining propriety of developed tool, simulation is performed with several signals that have different frequency range. After checking the coherence functions for concerned frequency domain, an experiment is conducted on an evaporator that cause the principal noise of a refrigerator.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.30 no.9 s.252
• /
• pp.1154-1159
• /
• 2006

In this paper, time-frequency analysis and multi-dimensional spectral analysis methods are applied to source identification and diagnostic of non-stationary sound vibration signals. By checking the coherences for concerned time, this simulation is very well coincident to expected results. The proposed method analyzes the signal instantaneously in both time and frequency domains. The MDSA (Multiple Dimensional Spectral Analysis) analyzes the signal in the plane of instantaneous time and instantaneous frequency at the same time. And it was verified by using the 1500cc passenger car which is accelerated from 70Hz to 95Hz in 4 seconds, the proposed method is effective in determining the vehicle diagnostic problems.

• The Journal of the Acoustical Society of Korea
• /
• v.10 no.6
• /
• pp.82-100
• /
• 1991

본 연구에서는 회전톱날에서 발생하는 공기소음원 규명의 실현가능성을 검토하였다. 음향인텐시 티법은 3차원 선도, 인벤시티 벡터에너지선도, 동고선도 등의 표현에 유용한 장점을 갖고 있다. 근거리 음장 거동에 대한 추정, 주파수영역에서의 벡터 또는 스칼라 음향인텐시티는 소음원규명의목적으로 사 용되는 측정기법이다. 결과에 따르면 난류는 원형톱날의 이 부근에 나타나며, 톱날의 변동압력 측정에서 와류구조의 영향에 대한 근거는 측정된 음향인텐시티에 의해 도출된다. 도한 회전속도가 증가함에 딸k, 상호작용은 도플러현상을 일으키는 중요한 소음메타니즘이 될 수 있다.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2009.10a
• /
• pp.463-464
• /
• 2009

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2010.10a
• /
• pp.592-593
• /
• 2010