• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1994.10a
• /
• pp.116-120
• /
• 1994

최근 항공우주 및 생산자동화 분야의 급격한 발달에 따라 정밀도와 효율성을 향상시키기 위해 저중량, 고강도 구조물이 요구된다. 그러나 경량화 추세로 인해 수반되는 구조물의 유연성 증가로 외력에 대한 구조응답의 진폭이 커지고 구조물의 피로 수명이 단축되어 매우 위험한 상황에 이를 수 있다. 이런 바람직하지 않은 진동현상을 제어하기 위해 여러 제어이론을 응용한 진동억제시스템의 연구가 활발하며, 신소재인 압전재료의 개발로 새로운 방향이 제시되고 있다. 압전재료는 유연한 구조물에 부착되어 압전재료의 수축, 팽창 운동에 의해 발생된 에너지를 부착된 구조물에서의 제어력으로 사용되어, 진동 혹은 자세 및 형상 제어에 활용되고 있다. 압전재료에 대한 연구로는 Crawley, de Luis3가 보의 표면 혹은 내부에 압전세라믹을 부착하여 액튜에이터로 사용하는 경우 집중모멘트를 가하는 역할을 함을 밝혔고, Hanagud, obal은 압전재료를 센서와 액튜에이터로 사용해 복합재료 보에 대한 최적 진동제어 알고리즘을 개발, 그 성능에 대한 효과를 조사하였고 임의의 위치에 부착된 센서 및 액튜에이터를 고려한 복합재료 보의 운동방정식을 유한요소법을 이용 유도하였으며 변위율 피드백(rate feedback)과 모달피드백(modal feedback) 제어기를 적용하여 진동제어 효과를 고찰하였다. 그리고 Tomas, James, Hubbard는 압전필름을 액튜에이터로 사용해 복합재료 보에 Liapunov 제어기와 변위율 피드백 제어기를 사용하여 능동감쇠기를 설계하였고, Lee, Chaing, Sullivan은 압전필름을 센서와 액튜에이터로 사용해 평판에 변위율 피드백 제어기를 적용한 능동감쇠기를 설계하고 실험적으로 수행하였다. Base가 백색잡음가진을 지속적으로 받을 때 보끝의 움직임이 최소가 되도록 제어하고자 연구를 수행 중인 바 그 결과로소 본 논문에서는 적용시켰고 F-P-K 방정식을 이용해 확률영역으로 변환하여 LQR 제어기와 pole allocation 제어기를 시스템에 적용시켜 우수한 특성을 갖음을 제어 시뮬레이션의 결과를 통해 입증하였다.

• Journal of Pharmaceutical Investigation
• /
• v.8 no.2
• /
• pp.18-25
• /
• 1978

가토뇨중(家兎尿中) Vanillylmandelic Acid(VMA)배설양(排泄量)의 변화(變化)에서 약물반응(藥物反應)과 circadian rhythm을 추구(追求)하기 위(爲)하여 가토(家兎)에 대(對)해 각종(各種) stress를 가(加)하고, 이에 의(依)한 VNA치(値) 증가(增加)에 대(對)한 유효성(有?性)을 몇가지 약제(藥劑)에서 찾기 위(爲)해 전기(電氣) stress를 미리 가(加)한 가토(家兎)에 대(對)하여 투여(投與)하고 이들 뇨중(尿中) VMA치(値)를 측정(測定)해 하였다. 정상상태(正常狀態)의 가토(家兎) 1일뇨중(日尿中)의 VMA치(値)는 평균(平均) $19.17{\times}10^{-2}mg/24hrs$였다. 전기(電氣) stress를 가(加)한 가토뇨중(家兎尿中)의 VMA치(値)는 평균(平均) $28^{\cdot}87{\times}10^{-2}mg/24hrs$로 가장크게 증가(增加)하였고, 소음(騷音) stress를 가(加)하였더니 평균(平均) $27.39{\times}10^{-2}mg/24hrs$로 증가(增加)하였으며, 조명(照明) stress를 가(加)했을때는 평균(平均) $19.10{\times}10^{-2}mg/24hrs$로 거의 변화(變化)가 없었다. 전기(電氣) stress를 가(加)한 가토(家兎)에 reserpine을 투여(投與)했더니 평균(平均) VMA치(値)가 $18.90{\times}10^{-2}mg/24hrs$로 배설억제효과(排泄抑制?果)가 가장 좋았고, 산조인탕(酸棗仁湯)을 투여(投與)했을때 평균(平均) $25.76{\times}10^{-2}mg/24hrs$로 억제(抑制)되었으며, 인삼(人蔘)엑기스를 투여(投與)했을때 평균(平均) $28.14{\times}10^{-2}mg/24hrs$로 효과(效果)가 거의 없었다.

• Journal of the Korean Geotechnical Society
• /
• v.22 no.5
• /
• pp.69-81
• /
• 2006

The micropile, which is a kind of the in-situ manufactured pile with small diameter of $150\sim300mm$, is constructed by installing a steel bar or pipe and injecting grout into a borehole. The application fields of micropile are being gradually expanded in a limited space of down-town area, because the micropile has various advantages with low vibration and noise in method and compact size in machine, etc. Mostly, the micropile has been applied to secure the safety of structures, depending on the increment of bearing capacity and the restraint of displacement. The micropile is expected to be used in various fields due to its effectiveness and potentiality in the future. The model test, focused on the interaction between micropile and soil in this study, was carried out. The micropile is installed in a soil adjacent to footing (concept of 'soil reinforcement'). With the test results and soil deformation analysis, the reinforcement effect (relating to bearing capacity and settlement) was analysed in a qualitative and quantitative manner, respectively. Consequently, it is expected that we nay demonstrate the improvement of an efficiency and application in the design and construction of micropile.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.3C
• /
• pp.191-200
• /
• 2006

The micropile, which is a kind of the in-situ manufactured pile with small diameter of 100~300mm, is constructed by installing a steel bar or pipe and injecting grout into a borehole. The application fields of micropile are being gradually expanded in a limited space of down-town area, because the micropile has various advantages with low vibration and noise in method and compact size in machine, etc. Mostly, the micropile has been applied to secure the safety of structures, depending on the increment of bearing capacity and the restraint of displacement. The micropile is expected to be used in various fields due to its effectiveness and potentiality in the future. The model test, focused on the interaction between micropile and soil in this study, was carried out. The micropile is installed under footing(concept of "structure supporting"). With the test results and soil deformation analysis, the reinforcement effect(relating to bearing capacity and settlement) was analysed in a qualitative and quantitative manner, respectively. Consequently, it is hoped to demonstrate the improvement of an efficiency and application in the design and construction of micropile.

• Science of Emotion and Sensibility
• /
• v.8 no.1
• /
• pp.47-54
• /
• 2005

This study is aimed to inspect how the different sensitivities in Behavioral activation system(BAS) and behavioral inhibition system(BIS) modulate on the properties of physiological responses stimulated by positive or negative affective sound. We measured the electroencephalogram(EEG) and electrocardiogram (ECG) of 32 students, consisted of four groups depending on the BAS and BIS sensitivities, during listening to meditation music or noise. The EEG was recorded at Fpl and Fp2 sites and Power spectral density(PSD) of HRV was derived from the ECG, and the power of HRV was calculated for 3 major frequency ranges(low frequency[LF], medium frequency and high frequency[HF]). After listening to music or noise, subjects reported the affect induced by the sound. For EEG, the power in the alpha band at Fp2, especially in the alpha-2 band(9.0-11.0 Hz) increased during the subjects listening to music, while the power at Fpl increased during noise. During listening to meditation music, there is a tendency that the left-sided activation in prefrontal cortex(PFC) is positively correlated with the difference of BAS(Z)-BIS(Z). During listening to noise, there is a tendency that the right-sided activation in PFC is dominant in case any of the sensitivity of BAS or BIS is high. For HRV, we found that the index of MF/(LF+HF), during listening to music, was higher significantly in the individuals with a low BIS but high BAS than in the individuals with a low sensitivity both BIS and BAS individuals. With high BIS, regardless of the BAS sensitivity, the difference of this index values was not significant. From these results we suggest that the physiological responses of different individuals in BAS and BIS react differently under the same emotionally provocative challenge.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.6
• /
• pp.74-79
• /
• 2019

The military vehicle produces electric power through an engine-integrated serial hybrid generator that is connected to the engine and does not have a separate generator installation space. However, depending on the mechanical characteristics of the connection between the generator and the engine, iron oxide for internal rusting and lubrication grew scattered. The iron oxide is adhered to the starter to deteriorate the starting performance, and there is a problem that the noise of the leg due to wear of the gear is increased. To solve this problem, the connection spline material and the surface treatment of the engine were improved and the shape was changed to a grease sealing type to prevent the generation of iron oxide inside. As the shape of the generator connector composing the shafting system was changed, the integrity of the structure was confirmed through the torsional endurance test. In addition, through the actual vehicle load test, it was verified that no corrosion occurred during the target life span without internal corrosion. It was confirmed that the anti-scattering structure of the grease effectively suppresses the generation of iron oxide, thereby reducing the noise generated from the generator. In this paper, we propose a fundamental solution to the degradation of the starter and the noise generation by preventing the back corrosion caused by the serial hybrid generator installed between the engine and the transmission.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.35 no.8
• /
• pp.693-698
• /
• 2007

A numerical method for accurate simulations of rotor aerodynamics is proposed. The numerical diffusion in the typically coarse grids away from the rotor blades is improved by implying a fourth-order of interpolation of local characteristic variables of the flow in the reconstruction stage of MUSCL approach in the framework of a finite volume formulation. In addition, different slope limiters are applied to the different characteristic fields, such as compressive limiters to linear characteristic fields to reduce the numerical dissipation whereas, diffusive limiters to nonlinear characteristic fields to increase numerical stability. Various exemplary problems related to the rotor aerodynamics applications are tested and the numerical results show a significant improvement in wake capturing capability. However, rotor aeroacoustic calculations show no meaningful difference over traditional MUSCL approach.

• JOURNAL OF ELECTRICAL WORLD
• /
• s.275
• /
• pp.63-69
• /
• 1999

최근 들어 세계적인 에너지 사정의 절박함과 지구환경보호 문제는 에너지 이용수단으로서의 전기에의 의존도를 더욱 높이고 있다. 그것은 전력이 갖는 다양한 이용형태와 제어의 용이성에서 얻어지는 에너지졀약 효과와 청정도(淸淨度)등에 유래한다. 이러한 동향에 따라 최근 전력을 변환$\cdot$제어하는 파워일렉트로닉스의 중요성이 재인식되고 있음은 물론 앞의 과제의 해결수단으로서도 기대가 높아지고 있다. 1차에너지원에서 시작하여, 우리들이 접하는 기기나 장치의 전원에 이르기까지 에너지의 흐름에는 발송전, 전력변환, 장치구동의 3단계의 변환과정이 있다. 각 단계의 어느것이나 파워일렉트로닉스가 관여하는 기술영역으로서 각각의 변환과정에서의 에너지 로스나 환경오염에 대한 대책이 가장 중요한 과제가 되고 있으며, 그 개선책에 대하여 각국에서 지금 열심히 연구개발이 진행되고 있다. 이상과 같은 추세에 따라 최근의 파워일렉트로닉스의 주요 기술동향을 요약하면 다음과 같다.(1)대용량화 전력계통제어에의 적용을 주체로 하여 파워디바이스, 손실경감기술, 계통제어기술 등을 개발하여 제어시스템 전체의 자스페이스와 전력손실 경감을 도모한다. (2)인텔리전트화 전력이나 전동기의 제어를 주대상으로, 정보처리기능의 향상에 대응한 제어기술을 도입하여 고성능$\cdot$저손실$\cdot$저진동 등의 제어를 실현한다. (3)범용화(汎用化) 각종 산업분야에의 고정속(固定速) 전동기부하를 대상으로, 인버터에 의한 가변속기능을 부가함으로서 저에너지장치의 소형화, 저소음화 등을 달성한다. (4) 환경조화 모든 파워일렉트로닉스 관련기기를 대상으로 저(低)진동소음$\cdot$고조파억제$\cdot$자전력 소형화기술 등을 개발하여 환경에 친화적인 기기$\cdot$장치를 제공한다.

• The Journal of the Acoustical Society of Korea
• /
• v.15 no.4
• /
• pp.105-112
• /
• 1996

A linear acoustic analysis for baffled rocket combustion chambers has been developed. This study provides the comprehensive theoretical background for the baffle as one of the stabilizing devices in a liquid rocket propulsion system. Several specific effects of baffles are presented as mechanisms by which baffles eliminate instability. Included are longitudinalization of transverse waves inside baffle compartments, severe restriction of velocity fluctuations near the injector face, and decreased normal mode frequency of the chamber.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.4 no.6
• /
• pp.554-560
• /
• 1999

In this paper, a vibration suppression method using an energy stored in winding inductance and an induced v voltage of the Linear Stepping Motor(LSM) is shown, and it is applied to a new one-phase excitation method A And a magnetic equivalent circuit is based on the structure of the LSM, and then the electric equivalent circuit of the LSM is derived by solving equations for the magnetic equivalent circuit. Several dynamic characteristics of the LSM are analyzed by the ACSL with the voltage equations, the force equations and the kinetic equation, a and are measured by experimental system.