• The Journal of the Acoustical Society of Korea
• /
• v.14 no.2
• /
• pp.40-49
• /
• 1995

Application of the filtered-x LMS adaptive filter to active noise cancellation requires to estimate the transfer charactersitics between the output and the error signal of the adaptive canceler. In this paper, we derive the filtered-x adaptive noise cancellation algorithm and analyze its convergence behavior when the acoustic noise consists of multiple sinusoids. The results of the convergence analysis of the filtered-x LMS algorithm indicate that the effects of the parameter estimation inaccuracy on the convergence behavior of the algorithm are characterized by two distinct components : Phase estimation error and estimated gain. In particular, the convergence is shown to strongly affected by the accuracy of the phase response estimate. Simulation results are presented to support the theoretical convergence analysis.

• The Journal of the Acoustical Society of Korea
• /
• v.32 no.6
• /
• pp.455-471
• /
• 2013

Active sonar has been commonly used to detect targets existing in the shallow water. When a signal is transmitted and returned back from a target, it has been distorted by various properties of acoustic channel such as multipath arrivals, scattering from rough sea surface and ocean bottom, and refraction by sound speed structure, which makes target detection difficult. It is therefore necessary to consider these channel properties in the target signal simulation in operational performance system of active sonar. In this paper, a monostatic active sonar system is considered, and the target echo, reverberation, and ambient noise are individually simulated as a function of time, and finally summed to simulate a total received signal. A 3-dimensional highlight model, which can reflect the target features including the shape, position, and azimuthal and elevation angles, has been applied to each multipath pair between source and target to simulate the target echo signal. The results are finally compared to those obtained by the algorithm in which only direct path is considered in target signal simulation.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.38 no.8
• /
• pp.863-867
• /
• 2014

In this study, an acoustic emission (AE) sensor was used for measuring the abrasive and molecular-scale phenomena in chemical mechanical polishing (CMP). An AE sensor is a transducer that converts a mechanical wave into an electrical signal, and is capable of acquiring high-level frequencies from materials. Therefore, an AE sensor was installed in the CMP equipment and the signals were measured simultaneously during the polishing process. In this study, an AE monitoring system was developed for investigating the sensitivity of the AE signal to (a) the variations in the material properties of the pad, slurry, and wafer and (b) the change in conditions during the CMP process. This system was adapted to Oxide and Cu CMP processes. AE signal parameters including AE raw frequency, FFT, and amplitude were analyzed for understanding the abrasive and molecular-level phenomena in the CMP process. Finally, we verified that AE sensors with different bandwidths could function in complementary ways during CMP process monitoring.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1994.04a
• /
• pp.100-105
• /
• 1994

본 연구에서는 변속기 중립상태에서 클러치 설계 인자인 비틀림 스프링과 건마찰에 의해서 클러치에 나타나는 히스테리시스, 그리고 클러치 디스크의 정적처짐을 발생시키는 드래그토크(drag torque)가 클러치의 동적인 거동과 기어래틀에 미치는 영향을 분석하고자 한다.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2013.10a
• /
• pp.318-319
• /
• 2013

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1997.10a
• /
• pp.205-209
• /
• 1997

본 고에서 소개될 내용은 기존에 계측기로 구성되는 시스템의 하드웨어 구성과 PC로 구성할 때의 사양 비교를 알아보며, 응용 프로그램에 있어 상용화된 프로그램 tool을 활용하여 응용 프로그램을 개발하는 기술과 지원 방안을 제시하고자 하며 엘텍에서는 이러한 하드웨어와 user 응용 프로그램의 완벽한 개발로 실사용자들이 보다 나은 시스템 환경에서 완벽한 시험/측정/분석의 업무를 수행할 수 있도록 지원한다. 또한 외국의 많은 업체가 이 프로그램을 이용하여 자체 시스템을 구축하여 국내에 소개되는 시스템이 많은 실정이다. 엘텍에서는 이미 NDT, AE, THD/전원 분석을 위한 시스템 및 프로그램 개발을 완료했으며 국내에 이미 소개된 시스템도 있다. 그러므로, 소음.진동 분야에도 완벽한 시스템 구축을 추진하고자 한다.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2008.11a
• /
• pp.43-48
• /
• 2008

Gear system has been widely used in industrial applications and unexpected failures of gears are not only extremely damaging but also lead to economic losses. So, early detection of fault is important for diagnosis machine condition. And acoustic emission is an efficient non destructive testing technique for the diagnosis of machine health and is useful technique for early detection of fault because it can find low-amplitude and high-frequency signal on account of high sensibility. Therefore, in this paper, the AE signal was measured and preprocessed using envelop analysis for gearbox with misalignment between pinion and gear. And then the vibration characteristic of gear misalignment was analyzed.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.12 no.4
• /
• pp.287-293
• /
• 2002

The unexpected failure of the induction motor makes the downtime of production, and the cost of the process cessation enormous. To reduce the downtime and increase the reliability of the motor, the vibration measurements for the fault detection have been used previously. Recently motor current signature analysis(MCSA) has been adapted for the fault detection and diagnosis of the motors. MCSA provides a powerful analysis tool for detecting the presence of mechanical and electrical faults in both the motor and driven equipment. In this paper, the fault severity of the rotor bar has been derived in terms of the resistance change which is calculated from the equivalent circuit model. Results show that the fault of the rotor can be easily detected and the measured value of the resistance change is verified by the detected fault from on-site tests using MCSA for the induction motors in an iron foundry.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2014.04a
• /
• pp.215-215
• /
• 2014

현재 가장 많이 사용되고 있는 스프링식 안전밸브는 스프링과 설정치 드리프트, 누설 취약성, 채터링에 의한 시트 파손등의 문제점을 지니고 있다. 안전밸브 디스크에서 발생하는 유체 누설은 안전밸브 설정압력 개방에 영향을 주며, 시트(Seat)면의 이물질 삽입, 균열 및 유체에 의한 침식(Erosion) 등에 의해 밸브 핵심 부품이 쉽게 손상되어 기기 성능 저하를 초래하게 된다. 따라서 유체 누설을 조기에 탐지하고 정량화하여 해당 기기의 상태정보 제공을 통한 누설 감지 기법 연구가 요구된다. 원자력 발전소의 경우 밸브에서 유체가 누설되면 밸브의 오작동 및 운전 안정성 저해 요인이 된다. 따라서 본 연구에서는 음향방출법을 이용하여 안전밸브의 유체 누설을 평가하고, 안전밸브의 음향신호 측정 위치 선정 및 누설량에 따른 음향신호를 분석하고자 한다.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.21 no.2
• /
• pp.106-111
• /
• 2011

In this paper, assumed mode method on Euler beam theory is employed and signal distortion is considered to obtain the performances of a MEMS accelerometer which are a sensitivity and measurable frequency range(MFR). Not only the sensitivities and MFR but also the variations of dynamic responses and natural frequencies of the MEMS accelerometer are investigated for several sets of beam properties such as length, width, thickness and Young's modulus. It is stated that the variations of beam properties significantly influence the performances of the MEMS accelerometer and the relationship between sensitivities and MFR is inversely proportional to each other.