• 한국공간정보시스템학회:학술대회논문집
• /
• 2005.05a
• /
• pp.141-147
• /
• 2005

공간정보체계 관련 구축 사업들이 시작되면서 전문분야별 소요인력에 대한 문제가 제기되었고, 다양한 방법에 의하여 전문 인력양성을 추진하여 왔다. 초장기 인력 규모의 예측은 사업 규모에 기반하여 예측되어졌고 인력 수요기관의 요구와 특징이 반영되지 못한게 사실이다. 이제는 공간정보체계가 광범위하게 확산되어 산업 현장을 통하여 소요 인력의 예측이 가능하게 되었다. 본 연구에서는 인력 소요처들로부터 필요한 인력 규모를 조사하여 소요인력을 예측하고, 인력의 변화 특성들을 파악함으로서 기술수요에 따른 인력 육성분야와 수요량을 기반으로 하는 인력양성에 활용하고자 하는데 그 목적이 있다. 인력 소요예측은 소요 인력이 활용되는 기업 등을 중심으로 산업적 성장성과 개별 기업의 인력 요구 등을 고려한 공간정보체계의 각 분야별 인력 소요 예측을 수행하도록 한다. 이를 토대로 산업적 특성, 기술적 특성, 소요 인력의 수요 증가 형태 및 특징을 분석하여 종합적인 소요 인력 규모를 산정하고 있다.

• Journal of Navigation and Port Research
• /
• v.31 no.5 s.121
• /
• pp.361-368
• /
• 2007

The storage space requirement is a very important decision variable which determines the storage capacity of a container terminal. Generally, the storage space requirement is dependent upon such factors as ship headway, allowable dwell time of containers, loading/winding time per ship, and so on. Until now, the storage space requirement is estimated under the assumption that the factors are deterministic in several studies. However, this study proposes how to estimate a storage space requirement satisfying the required service level under the assumption that a containership's load size is probabilistic. Numerical experiments, which use a simulation show that the proposed method can estimate more adequately the storage space requirement than other methods under a probabilistic environment.

• Magazine of korean Tunnelling and Underground Space Association
• /
• v.4 no.2
• /
• pp.50-59
• /
• 2002

• 한국지형공간정보학회:학술대회논문집
• /
• 2004.10a
• /
• pp.135-140
• /
• 2004

GIS의 기초가 되는 수치지도의 활용은 빠르게 증가하고 있는 추세이다. 수치지도의 제작 공정에 있어서 많은 발전이 있어 왔지만 지리조사와 구조화편집 공정에는 여전히 지도 출력물에 의존하는 기존의 방법을 사용하고 있었다. 이에 본 연구는 이러한 공정에 현장측량시스템의 활용하는 방법을 제안하고, 제안된 방법을 수치지도 제작에 적용하여 기존의 방법에 의한 결과와 비교 분석하였다. 제안된 방법을 적용하면 수치지도 제작 과정에 필요한 소요 인원 및 단계가 절감되며 이에 따라 소요 비용과 작업 단계마다 발생하게 되는 오류를 줄일 수 있었다.

• Journal of Korean Society of Transportation
• /
• v.20 no.4
• /
• pp.177-185
• /
• 2002

본 논문의 목적은 링크통행시간 자료를 수집하는 시스템에서 소요 프로브차량대수에 영향을 주는 요소들을 규명하고. 최적의 소요 프로브차량대수를 결정하는 모형을 개발하는데 있다. 자가용승용차, 택시, 버스, 택배차량 등 여러 종류의 차량들이 프로브차량으로 사용될 수 있다. 그러나 일정한 정확도 이상의 교통정보를 수집하기 위해서 얼마나 많은 프로브차량이 필요한지에 대한 연구는 그다지 깊이 있게 이루어지지 않았다. 적정 소요 프로브차량대수는 링크통행시간 자료수집 기술 수집대상 링크의 공간적 범위, 프로브차량의 종류 및 운행 특성, 자료수집 시스템의 신뢰도, 수집되는 자료의 정확도 등에 영향을 받게 된다. 소요 프로브차량대수를 결정하는 링크당 평균 통행시간 자료수, 프로브차량 밀도의 최소 확률, 그리고 자료 미수집링크의 허용비율의 3가지 결정기준이 정의되었다. 또한 이러한 결정기준에 대해 소요 프로브차량대수를 산출하는 모형이 개발되었다. 일반적으로 주기당, 링크당 평균 필요 통행시간 자료수$(d_R)$, 단위길이당 프로브차량의 대수 또는 밀도$(n_{min} or {\alpha})$, 일정 프로브차량밀도 이상의 확률($\beta$), 그리고 자료 미수집링크의 비율($\gamma$)이 클수록 소요 프로브차량대수는 증가한다. 민간 교통정보회사의 통행시간 수집시스템에서 소요 프로브차량대수를 산정하는 사례연구가 수행되었으며, 여러가지 조건에서 소요 프로브차량대수가 산출되었다.

• The Journal of Sustainable Design and Educational Environment Research
• /
• v.16 no.2
• /
• pp.10-18
• /
• 2017

The University library is a reality where facilities can be a massive upset by the space of students to study space and book materials. Also, many print materials can cause fires quickly in fires, resulting in massive amounts of human casualties caused by many toxic gases. This study purpose is compares the time spent in the evacuation of the current state through the simulation, which seeks to derive a reasonable library of evacuation design, and improved inside the evacuation. As a result, the most obvious way to reduce the time required to evacuate is to diversify the evacuation routes and to disperse them. However, if the extension of the gate is not feasible, it is possible to reduce the time of escape by increasing the width of the gate and the width of the stair. If the results of this study are applied to new construction or remodeling of the library and prepare for fire evacuation, it will be a much safer library facility.

• Journal of Korean Library and Information Science Society
• /
• v.46 no.3
• /
• pp.349-379
• /
• 2015

In the 1980's opening 79 of the end of 2013, the National Public Library that had been It was 885 its opening remains in effect. Especially in the 2000s after 60% of the whole library, a library erected since the advent of the library is enough to be a significant quantitative expansion. The resulting to make a qualitative aspect of public libraries and increase users' needs for efficient space configuration. IIn particular, the user is to serve the needs of digital reading room and the increase of the cultural training changes after 2000 years ago, and appears as due to the implications of space configuration in an age-appropriate library space off the rate plan is a necessary point. The study in the 1980s-1990s, built public library established since the year 2000 centered on public library mutual comparative analysis of space configuration form. Book reading function was the conservation and highlight 1980-1990s and considered by the side of the users culture area extended since the 2000s, public library takes the difference between the ratio of the area of the facility by the area in which you can meet the standards required and the age.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.30 no.2
• /
• pp.165-175
• /
• 2024

Hydrogen is being touted as one of the energy sources to combat the climate change crisis. However, hydrogen can leak into enclosed spaces, rise to the ceiling, accumulate, and cause fires and explosions if it encounters an ignition source. In particular, ships that transport hydrogen or use it as a fuel comprise multiple enclosed spaces. Therefore, the dif usion characteristics within these spaces must be understood to ensure the safe use of hydrogen. The purpose of this study is to experimentally determine the diffusion characteristics of helium, which has similar properties to hydrogen, in a closed space on board a ship, and to determine the change in the oxygen concentration along the leakage direction as the air change per hour(ACH) increases to 25, 30, 35, 40, and 45 through CFD simulation. The study, results revealed that the oxygen concentration reduction rate was 2% for leakage in the -z direction and 1% for leakage in the +x and +z directions, and the ventilation time was 15 min 30 s for leakage in the -z direction, 7 min for leakage in the +x direction, and 9 min for leakage in the +z direction, showing that differences existed in the oxygen concentration and ventilation time depending on the leakage direction. In addition, no significant difference was observed in the rate of oxygen concentration reduction and ventilation time in all leakage directions from the ACH of 35 and above in the experimental space. Therefore, because the oxygen concentration and ventilation time were not improved by increasing the ACH, 35 was noted as the optimal ACH in this experimental environment.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.21 no.6
• /
• pp.779-793
• /
• 2019

The ventilation rate (Qreq) requirement in road tunnels is not just a basic information for determining the tunnel cross-sectional area, but also a major factor for the ventilation system selection. The Qreq is predominantly dependent on the vehicle traffic volume, while among others, the vehicle exhaust emissions and permissible standards are critical. This paper analyzes the changes in the Qreq designing criteria and/or recommendations suggested by World Road Association and local authorities over the last 20 years, since the first local designing criteria was established in 1997 by Korea Expressway Corporation. Additionally, based on the updated vehicle emission standards of Ministry of Environment and recent recommendations of the World Road Association (WRA), changes in the Qreq and its effects are studied in terms of the length and grade of the tunnel.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.19 no.3
• /
• pp.409-420
• /
• 2017

The amount of ventilation required in making the tunnel ventilation plan is an important factor for determining the capacity of the ventilation system. The amount of pollutant emission for each type of vehicle (basic emission amount for the design of ventilation volume) for estimating the required ventilation amount is based on the 'Standard for Allowing the Emission for the car manufacturing', proposed by Ministry of Environment. However, in 2013, the Ministry of Environment announced the 'Regulations on the calculation method of total emissions from vehicles' as a regulation for calculating the pollutants emitted from vehicles. In this regulation, there are the 'Emission factors for each type of vehicle'. Therefore, it is necessary to review the application of the Regulation to the estimation of the required ventilation volume for the road tunnel. In this study, the influence of the strengthened emission regulation in 2015 caused by the case of manipulation of emission volume for the diesel vehicle on the calculation of the required ventilation volume in the road tunnel has been checked. In addition, in this study, the required ventilation volume calculated according to the Standard for Allowing the Emission for the car manufacturing revised by Ministry of Environment and "Emission factors for each type of vehicle" and that calculated according to the EURO emission standard were compared for analysis. This study has implications that it provides the basic design data for calculating the reasonable ventilation capacity of the ventilation system based on the ground for calculating the required ventilation volume.