• Tuberculosis and Respiratory Diseases
• /
• v.44 no.3
• /
• pp.621-628
• /
• 1997

Background : As the pleural inflammation progresses, exudative pleural fluid becomes loculated rapidly with pleural thickening. Complete drainage is important to prevent pleural fibrosis, entrapment and depression of lung function. Intrapleural urokinase instillation therapy has been advocated as a method to facilitate drainage of gelatinous pleural fluid and to allow enzymatic debriment of pleural surface. This study was designed to investigate the predictors of effectiveness of intrapleural urokinase in the treatment of loculated pleural effusion. Method : Thirty-five patients received a single radiographically guided pig-tail catheter ranging in size from 10 to 12 French. Twenty-two patients had tuberculous pleural effusions, and 13 had non-tuberculous postpneumonic empyemas. A total of 240,000 units of urokinase was dissolved in 240 ml of normal saline and the aliquots of 80mL was instilled into the pleural cavity via pig-tail catheter per every 8hr. Effectiveness of intrapleural urokinase instillation therapy was assessed by biochemical markers, ultrasonography, and technical details. A greater than 50% improvement on follow-up chest radiographs was defined as success group. Result : Twenty-seven of 35 (77.1%) patients had successful outcome to urokinase instillation therapy. Duration of symptoms before admission was shorter in success group ($11.8{\pm}6.9day$) than in failure group ($26.62{\pm}16.5day$) (P<0.05). Amount of drained fluid during urokinase therapy was larger in success group ($917.1{\pm}392.7ml$) than in failure group ($613.8{\pm}259.7ml$) (P<0.05). Pleural fluid glucose was higher in success group ($89.7{\pm}35.9mg/dl$) than in failure group ($41.2{\pm}47.1mg/dl$) (P<0.05). Pleural fluid LDH was lower in success group ($878.4{\pm}654.3IU/L$) than in failure group ($2711.1{\pm}973.1IU/L$) (P<0.05). Honeycomb septated pattern on chest ultrasonography was observed in six of eight failure group, but none of success group (P<0.05). Conclusion : Longer duration of symptoms before admission, smaller amount of drained fluid during urokinase therapy, lower glucose value, higher LDH value in pleural fluid examination, and honeycomb septation pattern on chest ultrasonograph were predictors for failure group of intrapleural urokinase instillation therapy.

• Tuberculosis and Respiratory Diseases
• /
• v.42 no.5
• /
• pp.685-694
• /
• 1995

Introduction: Transthoracic fine needle aspiration biopsy(TNAB) has shown to be a resonably safe, simple, and accurate procedure in diagnosis of intrathoracic lung lesions. We reviewed the results of 1,005 TNAB of chest lesions performed on 930 patients with 20 or 22-gauze needles over a period of 10 years. Methods: From November 1983 to June 1995, 1,005 cases in 930 patients with an undiagnosed lung lesion underwent TNAB at the Hanyang University Hospital: 66% were men and 34% were women. Most of the patients were 40~60 years old and the youngest patient was 3 years of age. Result: 540 patients had various malignant chest lesions and 322 patients had benign pulmonary lesions. The diagnostic accuracy of TNAB was 96.1 percent in malignant diseases with one false positive result and 90.1% in benign diseases. A definitive diagnosis was not obtained in the remaining 68 patients. The most common diagnoses among 519 malignancy chest lesions with TNAB were the following: squamous cell lung carcinoma, 31.7%; adenocarcinoma, 24.7%; small cell lung carcinoma, 16.7%; metastatic cancer, 14.2%; large cell lung carcinoma, 6.2% and so on. Complications included pneumothorax in 12.3% necessitating chest tube drainage in 0.6%. Minor hemoptysis occurred in 3.6%. There was no death directly attributable to the procedure. Conclusion: We concluded that TNAB permits a direct approach to all kinds of localized lung lesions with a high degree of accuracy and without major complications.

• Tuberculosis and Respiratory Diseases
• /
• v.55 no.3
• /
• pp.267-279
• /
• 2003

Background : The purpose of this study was to analyze the smoking habits in patients with lung cancer and identify any difference of prevalence according to histologic types of lung cancer. Methods : The data were calculated by total amounts of tar and nicotine inhaled during the whole lifetime according to variation of smoking habit. This study was to investigated any difference of prevalence in lung cancer according to smoking habits. The subjects comprised 150 lung cancer cases and 300 hospital control cases that were matched by age and sex. Smoking habits during the whole lifetime were surveyed by standardized questionnaire. Odds ratios were estimated by unconditional logistic regression analysis. Results : There were 104 male and 34 female lung cancer cases. By histologic type, there were 53 cases of squamous cell carcinoma, 67 of adenocarcinoma and 30 of small cell lung carcinoma. The differences between lung cancer cases and controls according to smoking habits were total duration of smoking, total pack years of smoking and number of cigarettes smoked per day during the previous two years. The odds ratio were higher in Kreyberg I, but not in Kreyberg II, for the longer duration of smoking, the greater total pack years of cigarettes consumed, the more cigarettes smoked per day during the previous two years, the longer duration on non-filter smoking, the earlier life cases who began to smoke, and the higher amounts of calculated total tar and nicotine inhaled over the whole lifetime. When we added grade of inhalation to calculation of amounts of tar and nicotine inhaled over the lifetime, the odds ratios of total inhalation amounts of tar and nicotine were as high as those the without them. Conclusions : This study reconfirmed that smoking habits were strongly associated with lung cancer and that there were different associations between smoking habits and histologic types of lung cancer. In particular, calculations of total tar and nicotine amounts inhaled over the whole lifetime were calculated for the first time in trials from lung cancer epidemiologic studies.

• Tuberculosis and Respiratory Diseases
• /
• v.58 no.4
• /
• pp.359-366
• /
• 2005

Background : IGFBP-3 inhibits the mitogenic and anti-apoptotic activity of IGF by blocking the binding of IGF to its receptor. However, under certain circumstances, IGFBP-3 can enhance the activity of IGF by protecting IGF from its degradation. More than half of the interindividual variations in IGFBP-3 levels are known to be genetically determined by the polymorphism at -202 locus of IGFBP-3 gene. Method : We attempted to ascertain whether A-202C polymorphic variation of IGFBP-3 gene constitutes a risk factor for non-small cell lung cancer (NSCLC), using PCR-restriction fragment length polymorphism (RFLP). Our study included 104 NSCLC patients and 104 age-, gender-, and smoking status-matched control subjects. Result : In the 104 NSCLC subjects, the genotypic frequencies at the -202 site were as follows: AA = 67 (64.4%), AC = 35 (33.7%), and CC = 2 (1.9%). We did detect significant differences in the genotypic distribution between the NSCLC and the control subjects (p<0.05), and the NSCLC risk correlated significantly with AA genotype at the -202 locus (AA>AC>CC). Using CC genotype as a reference, the odds ratio (OR) for the subjects with AC genotype was 2.60 (95% CI: 0.89 - 8.60), and the OR associated with AA genotype was 5.89 (95% CI: 1.92 - 21.16). Conclusion : These results indicate that the dysregulation of IGF axis should now be considered as another important risk factor for NSCLC, and a potential target for novel antineoplastic therapies and/or preventative strategies in high-risk groups.

• The Journal of Korean Academy of Prosthodontics
• /
• v.49 no.2
• /
• pp.168-176
• /
• 2011

Purpose: This study aims at investigating the influence of various insertion torques on thermal changes of bone. A proper insertion torque is derived based on the thermal analysis with two different implant designs. Materials and methods: For implant materials, bovine scapula bone of 15 - 20 mm thickness was cut into 35 mm by 40 - 50 mm pieces. Of these, the pieces having 2 - 3 mm thickness cortical bone were used as samples. Then, the half of the sample was immersed in a bath of $36.5^{\circ}C$ and the other half was exposed to ambient temperature of $25^{\circ}C$, so that the inner and surface temperatures reached $36.5^{\circ}C$ and $28^{\circ}C$, respectively. Two types of implants ($4.5{\times}10\;mm$ Br${\aa}$nemark type, $4.8{\times}10\;mm$ Microthread type) were inserted into bovine scapula bone and the temperature was measured by a thermocouple at 0.2 mm from the measuring point. Finite element method (FEM) was used to analyze the thermal changes at contacting surface assuming that the sample is a cube of $4\;cm{\times}4\;cm{\times}2\;cm$ and a layer up to 2 mm from the top is cortical bone and below is a cancellous bone. Boundary conditions were set on the basis of the shape of cavity after implants. SolidWorks was used as a CAD program with the help of Abaqus 6.9-1. Results: In the in-vitro experiment, the Microhead type implant gives a higher maximum temperature than that of the Br${\aa}$nemark type, which is attributed to high frictional heat that is associated with the implant shape. In both types, an Eriksson threshold was observed at torques of 50 Ncm (Br${\aa}$nemark) and 35 Ncm (Microthread type), respectively. Based on these findings, the Microthread type implant is more affected by insertion torques. Conclusion: This study demonstrate that a proper choice of insertion torque is important when using a specific type of implant. In particular, for the Microthread type implant, possible bone damage may be expected as a result of frictional heat, which compensates for initial high success rate of fixation. Therefore, the insertion torque should be adjusted for each implant design. Furthermore, the operation skills should be carefully chosen for each implant type and insertion torque.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.25 no.1
• /
• pp.162-170
• /
• 1998

The purpose of this study is to provide framework for understanding children's dental utilization. In this paper Andersen-Newman's model is applied to the use of dental visits. This model consists of predisposing, enabling, and need components that describe a person's decision to use dental health services. One thousand, nine hundred seven children and their mothers were selected for the study. The children were fourth grade to sixth grade in elementary schools in Iksan city, Korea. Models are operationalized using stepwise multiple regression analysis and path analysis. The number of independent variables used in the analysis was 39 in total, ie 32 predisposing components, 6 enabling components, and 1 need component. Children's Dental utilization was measured based on the number of visits. The data collected by means of a questionnaire survey. In this study, the amount of variance by the model was 25 percent. Predisposing factors had the greatest effect on utilization. Number of restricted activity days caused by oral disease, having a regular dental care, and susceptibility on oral disease of children were found to have significant major effects on dental utilization of children. Mother's dental visits was most important factor affecting dental utilization of children.

• Journal of Aquaculture
• /
• v.13 no.2
• /
• pp.169-174
• /
• 2000

Reproductive cycle of U. unicinctus was studied from September 1998 to August 1999, using gonadosomatic index (CSI) as an indicator. In November, the CSI values were maximum for male (6.2) and female (7.0), respectively; the values were lowest for them (1.0 and 0.5) during the successive february. Subsequently, they rapidly increased and attained peak by March-April. The values decreased again in both sexes and remained unchanged until August. The index increased in October to attain the peak by November. The CSI values clearly indicated that there are two spawning events in a year, namely the first one during April-May and the second one in December. Reproductive cycle was classified into the following successive stages: in female, multipication (January~February, June ~Setember), maturation (March~April, November), spent (May and December), degeneration and resting (June and January), and in male, multiplication January ~ february, June ~September), maturation (March~April, October~November), spent (May and December) and degeneration and resting (January and June). Histological observations revealed that oocytes in the ovary matured simultaneously in November and March. At the same time, the envelopes of matured testis became thinner than those in the early stage.

• Journal of Aquaculture
• /
• v.18 no.2
• /
• pp.107-114
• /
• 2005

Clownfish are important and very popular fish in the ornamental aquarium industry. Demand for the fish is increasing dramatically. The present study was conducted to verify methods of broodstock management, patterns of spawning, rates of egg hatching and estimates of larval growth fur the saddleback clownfish, Amphiprion polymnus. Spawning occurred 8 times between August 2002 to June 2004 with 2 females and 1 male participating. Fertilized eggs were separated by an adhesive matrix and were oval in shape. The eggs were $2.46{\pm}0.13mm$ in size as measured along the longest axis. The percentage of fertilized eggs was 96.7%. Hatching was observed seven days post-spawning and hatching rate was 85.5%. The sizes of the newly-hatched larvae were $4.58{\pm}0.21mm$ TL (total length). Larvae had an open mouth and anus, and an oval yolk sac. At the 1 st day after hatching, the sizes of the larvae were $4.90{\pm}0.35mm$ TL. The larvae began to eat rotifers after complete yolk absorption. On the 5th day post-hatch, larvae were $5.88{\pm}0.31mm$ TL with complete fins and the survival rate was 48.6%. At 8 days after hatching, a band began to appear on head and back of the larvae indicating the beginning of metamorphosis. Metamorphosis was completed at an average TL of $15.00{\pm}2.12mm$ on the 23rd day after hatching. By the 45th day after hatching, juveniles averaged $22.76{\pm}3.22mm$ TL and survival rate was 28.4%.

• Journal of the Korean Chemical Society
• /
• v.33 no.1
• /
• pp.97-105
• /
• 1989

This study deals with micellar effects on hydrolyses of p-nitrophenyl carboxylic esters(p-NPCE) mediated by 2-alkylbenzimidazole(R-BI) and sodium 2-alkylbenzimidazole-5-sulfonate(R-BISO$_3$Na) in aqueous and CTABr solutions. The reactions mediated by R-BI and R-BISO$_3$Na in micellar solutions are obviously slower than those by benzimidazole(BI) and sodium benzimidazole-5-sulfonate(BISO$_3$Na) respectively, and the reaction rates were decreased with increase of lengths of alkyl groups. This prestents a striking contrast to the reactions in aqueous solutions without added CTABr, of which the reaction rates are on approximately same levels. It seems due to steric effect of alkyl groups for R-BI and R-BISO$_3$Na in the Stern layer of micelle, and it is supported by measured activation parameters(${\Delta}H^{\neq},\;{\Delta}G^{\neq}\;and\;{\Delta}S^{\neq}$) of the reactions in aqueous and micellar solutions. In addition to nucleophilic ability of benzimidazole(BI) moiety of R-BISO$_3$Na on the reactions, these compounds with long alkyl groups(nonyl to pentadecyl) which form a micelle of themselves increase the reaction rates due to their micellar catalyses in aqueous solutions, not including CTABr. We measured the isotope effects to elucidate the mechanism of hydrolyses of p-nitrophenyl carboxylic esters, and the relative first order rate constant($k'_{H_2O}/k'_{D_2O}$) are on range of 2.5∼3.2. This range is too high to conclude that the hydrolyses of p-NPA mediated by various R-BISO$_3$Na proceed by nucleophilic mechanism. In other words, the reactions are assumed to proceed in part by general basic one, as compared with the reaction catalyzed by imidazole(IM) in aqueous solution.

• The Korean Journal of Mycology
• /
• v.1 no.2
• /
• pp.15-23
• /
• 1973

Mold producing cellulase were isolated from rotten woods, and identified as the three species: Aspergillus niger van Tieghem, Aspergillus schiemanni Thom and Trichoderma viride Pers. In this paper, culture conditions in the media and characteristics of these strains were investigated. Using these strains, we have conducted a research concerning the utilization of farm product waste materia's. 1. Optimum conditions for the cellulase formation were as follows. KM 10-1; pH 5.2-5.5, $35^{\circ}C$, incubation time 6 days. OL 11-1; pH 5.5, $30-35^{\circ}C$, incubation time 6 days. SH 9-2; pH 5.5, $30^{\circ}C$, incubatoin time 6 days. 2. Their cellulase activities in their optimum condition were as follows: KM 10-1; CMC-LP 78.5% CMC-SP 4.0 glucose mg/gm of the cultures/min. OL 11-1; CMC-LP 89.9%, CMC-SP 4.9 glucose mg/gm of the cultures/min. SH 9-2; CMC-I.P 77.4%, CMC-SP 3.9 glucose mg/gm of the cultures/min. 3. Hydrolysis of animal feed containing a large quantity (23-30%) of cellulose by means of the crude enzyme in the selected strains resolved 30% of the cellulose contained in the animal feed.