• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.9 no.6
• /
• pp.129-135
• /
• 2010

This paper suggests a multipath establishing scheme for ad hoc networks. Data paths are established by on-demand manner. Multipath are made as a sequence of route control message exchange at route setup process. Multipath can be used as a backup path or load balancing for data exchange. Proposed scheme uses a one-hop pre-search scheme for establishing multipath between source and destination. When a node selects a next node for route reply, the node finds optimal route by exchanging route information with neighbor nodes. Simulation results show that the proposed multipath scheme has better split characteristics among multipath and higher route survivability at the environment where nodes are moving.

• Proceedings of the Korean Information Science Society Conference
• /
• 2004.10c
• /
• pp.274-276
• /
• 2004

싱크의 이동성은 대규모 센서 네트워킹에 새로운 도전을 야기한다. 이동 싱크의 위치는 센서필드 전역에 걸쳐 전달되어야 하며, 이를 위해 각 센서노드는 새로운 정보를 갱신해야 한다. 그러나 빈번한 위치 갱신은 파워의 제약을 가진 센서에는 초과 에너지 낭비를 일으키고, 무선 통신의 충돌도 증가시킬 것이다. 이에 따라 본 논문은 다중 이동 싱크와 소스가 확장가능하면서 효율적으로 데이터를 전달하는 방법을 제안한다. 각 데이터 소스와 모바일 싱크가 적극적으로 싱크가 이벤트 정보를 획득 가능하도록 그리드 구조를 형성하고, 질의를 보내려는 하는 싱크도 로컬로 질의를 전송함으로써 그리드 형성에 적극 참여하였다. 본 제안 방법은 소스와 싱크가 중간 경유 노드에서 위치 정보를 교환함으로써 낮은 오버헤드로 경로 설정이 가능하게 하였다.

• Journal of Digital Convergence
• /
• v.13 no.2
• /
• pp.127-133
• /
• 2015

In order for location information to deliver the collected information, it needs Sensor Nodes in an environment of Sensor Network. Each sensor sends data to a base station through the process of routing in a wireless sensor network environment. Therefore, Offering accurate location information is very important in a wireless sensor network environment. Most of existed routing methods save all the informations of nodes at the area of 1-hop. In order to save these informations, unnecessary wasted energy and traffics are generated. Routing Protocol proposed in this paper doesn't save node's location information, and doesn't exchange any periodic location information to reduce wasted energy. It includes transmission range of source nodes and nodes with the location information, however it doesn't include any nodes' routing near 1-hope distance.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.11 no.3
• /
• pp.31-39
• /
• 2012

In this paper, we propose an energy-aware source routing protocol for maximizing a network lifetime in mobile ad hoc network environments. The proposed routing protocol is based on the source routing and chooses a path that maximize the path lifetime, by considering both transmit/receive power consumption and residual battery power in the mobile nodes from the perspective of source-destination end-to-end. This paper proposes a new routing cost and designs a new routing protocol for minimizing the control packet overhead occurred during the route discovery. Simulation results show that the proposed scheme has similar performances to the conventional routing schemes in terms of the number of transmission hops, transmission rate and total energy consumption, but achieves the performance improvement of 20 percent with respect to the lifetime.

• The Journal of the Acoustical Society of Korea
• /
• v.32 no.1
• /
• pp.86-94
• /
• 2013

In this paper, we propose a network coding scheme that is one of the most promising techniques for overcoming transmission errors in underwater acoustic communications. It is assumed that the proposed scheme operates in a Code Division Multiple Access (CDMA) network where multiple sensor nodes share the underwater acoustic channel in both the frequency and the time domains by means of orthogonal codes. The network topology deploys multi-hop transmission with relaying between multiple source nodes and one destination node via multiple relay nodes. The proposed scheme is evaluated in terms of the successful packet delivery ratio of end-to-end transactions under varying packet loss rates. A computer simulation shows that the successful delivery ratio is maintained at over 95% even when the packet loss rate reaches 50%.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.24 no.8B
• /
• pp.1421-1425
• /
• 1999

A restoration scheme is presented when a failure occurs at nodes or links on the ATM network. Each node on the network contains the same topology information for resources on the network by Exchanging NSE(Network State Element) which has the network state information through RCC(Routing Control Channel). We also propose a new establishing algorithm that set up a new alternate path reflecting the state of the network changed dynamically at the source node. In the result of applying our scheme, the rates of restoration can be improved and the number of messages decreased so that fast recovering could be possible by reducing traffics on the network by lowering the rates of the call-setup failure at the stage of CAC(Connection Admission Control).

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.1B
• /
• pp.136-143
• /
• 2010

In this paper, we investigate decode-and-forward (DF) relaying systems with a direct link between the source and the destination node. The objective of this paper is to determine the better relaying strategy between 3-hop DF relaying and dual-hop DF relaying with the best relay selection. Assuming Rayleigh fading channels, we present closed-form outage probability of the 3-hop relaying and the dual-hop relaying, respectively, and compare the performances by numerical investigation. Numerical results show that if the channel is poor, the outage performance of the 3-hop relaying is better than the dual-hop relaying.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.20 no.5
• /
• pp.421-427
• /
• 2009

This paper has proposed 1-2-1 coded cooperative communication that is a combination of STBC and ARQ. Coded cooperative communication is a protocol that integrates channel coding with cooperative communication. In this paper consider convolution encoder. ARQ method can increase the spectral efficiency than conventional cooperative communication because if the received signal from source node is satisfied by the destination preferentially, the destination transmits ACK message to both relay node and source node and then recovers the received signal. Where each relay 1, 2 forwards a punctured portion of receive data. When relay transmit to destination apply STBC the reliability to increase. Moreover this protocol can get better BER performance of receiver using simple comparator. We verified BER performance for the proposed protocol through Monte-Carlo simulation over Rayleigh fading plus AWGN.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.5B
• /
• pp.539-548
• /
• 2011

We propose an efficient cooperative ARQ (Automatic Repeat reQuest) scheme for single-hop and multi-hop underwater acoustic communications, in which cooperative nodes are used to provide more reliable alternative paths for a specific source-to-destination connection. This alternative path has higher channel quality than that of the direct source-destination path. In addition, during a packet-relay through multiple hops, the typical acknowledgement (ACK) signal is replaced with overhearing data packet returned back from the next hop. The usage of overhearing as an ACK improves the system performance. In this paper, we evaluate the proposed scheme by comparing it with a conventional S&W ARQ in terms of throughput efficiency. Computer simulation results show that the proposed cooperative retransmission scheme can significantly improve the throughput by increasing the probability of successful retransmission.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.7
• /
• pp.1565-1570
• /
• 2014

In networking communication, nodes and base station send data to each nodes and destination nodes. In this perspective, it is very important to determine the direction in which data sent to each nodes or destination nodes. Ad-hoc routing protocol is a standard routing protocol that determines how the packets sent to destination. Ad-hoc routing protocol includes protocols such as Ad-hoc On-demand Distance Vector (AODV) and Dynamic Source Routing (DSR). In our efficient proposed protocol based on small end-to-end sequence numbers, route direction can be changed properly with the assistance of helper nodes. In this paper, we focus on the simulation analysis of proposed protocol and comparison with other routing protocol models such as AODV and DSR. We simulated using Network Simulator (NS-2) by parameters such as simulation time, number of nodes and packet size based on our metrics (packet delivery fraction, routing load, data throughput). Our proposed protocol based on small end-to-end sequence numbers shows better performance and superior to other two protocols.