• Composites Research
• /
• v.13 no.4
• /
• pp.75-82
• /
• 2000

A small diameter steel-ball impact experiment was performed to study the impact resistance of the surface of glass plates bonded with glass fabric/epoxy lamina. Five kinds of materials were used in this study: soda-lime glass plates, glass/epoxy lamina(one layer)-bonded and unbonded glass plates, glass/epoxy lamina(three layers)-bonded and unbonded glass plates. The range of impact velocity was 40 120m/s. The maximum stress and absorbed fracture energy were measured on the back surface of glass plates. With increasing impact velocity, various types of surface cracks such as ring, cone, radial and lateral cracks took place in the interior near the impacted site of glass plates. The cracks drastically decreased with glass/epoxy lamina coating. The surface fracture behavior could be evaluated using the maximum stress and the absorbed fracture energy.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2000.04a
• /
• pp.20-25
• /
• 2000

In order to study the impact fracture behavior of brittle materials, a steel-ball-impact experiment was Performed. Five kinds of materials were used in this study : soda-lime glass plates, glass/epoxy prepreg-one layer-bonded and unbonded glass plates, glass/epoxy prepreg-three layers-bonded and unbonded glass plates. Fracture patterns, the maximum stress and absorbed fracture energy were observed according to various impact velocities 40-120m/s. With increasing impact velocity, ring crack, cone crack, radial crack and lateral crack took place in the interior of glass plates. The generation of such cracks was largely reduced with glass/epoxy prepreg coating. Consequently, it is thought that the characteristics of the dynamic Impact fracture behavior could be evaluated using the absorbed fracture energy and the maximum stress measured at the back surface of glass plates.

• Proceedings of the Korean Society Of Semiconductor Equipment Technology
• /
• 2006.10a
• /
• pp.126-131
• /
• 2006

광학적으로 우수한 특성을 지닌 유리는 온도에 민감한 대표적 점탄성 재료로서 역학적 열적 거동에 대한 충분한 이해와 해석이 평판 영상장치 제조공정에서 불량의 원인을 제거하고 공정 최적화를 하는데 중요하다. 본 연구에서는 평판 영상장치 제조공정에서 발생하는 문제들 중 하나인 열수축 현상(열처리 공정 전후 유리의 치수가 변하는 현상)을 소다라임 유리에 대해서 전산모사 하였으며, 유리의 구성방정식으로 구조이완 모델을 이용하였다.

• Journal of Conservation Science
• /
• v.32 no.1
• /
• pp.63-73
• /
• 2016

This study defined material and characteristics of 24 glass fragments and 26 whole glass beads. The feature of glass beads shape are divided into 5 types following color, size, weathering condition and manufacturing techniques. Through the chemical composition, the first and second type is soda glass, the third type is potash glass, the fourth and fifth type is lead barium glass. This site showed the aspect that the chemical composition is changed according to the feature of glass shape and was found that various chemical compositions. Looking at the flow of glass culture, the tomb that are lead barium glass IItype and potash glass I, IItype is relatively preceding period and the tomb that are soda glass and lead barium glass IIItype is following period.

• Applied Chemistry for Engineering
• /
• v.16 no.6
• /
• pp.760-767
• /
• 2005

The goal of this study was to find an application method of the waste soda-lime glass as the feed material for foamed glass by foaming of hydrated waste glass. The proper conditions for the foaming of hydrated waste glass were found to be: temperature of $92.5^{\circ}C$; reaction time of 10~20 min; particle size of -325 mesh as the unhydrated glass starting materials; and graphite weight to the hydrated glass ratio of 0.003 as the foaming agent. The resulting formed glass made from hydrated mixed waste glass under above mentioned conditions had the characteristics of density less than $0.2g/cm^3$ and thermal conductivity of $0.05kcal/mh^{\circ}C$.

• Journal of Conservation Science
• /
• v.29 no.3
• /
• pp.279-286
• /
• 2013

It is characterized and classified as the type of red brown glass beads to compare the chemical composition and manufacturing technique on the 141 samples in 12 sites of the Three Kingdom Period analyzed until now. It can be divided into three types according to the chemical composition of stabilizers(CaO & $Al_2O_3$) and soda raw materials(MgO & $K_2O$) on the red brown glass beads except one sample. Type I of high alumina glass is identified as the most common types that is 78.6 % of the distribution ratio at analytical samples and is excavated the most from ruin sites. In contrast, type II, 13.6 % of distribution ratio at analytical samples, is about 5 % CaO and $Al_2O_3$, MgO and $K_2O$ at around 1.5 % is similar to the composition of plant ash glass. Type III is that the content of CaO is higher than $Al_2O_3$ and the content of MgO and $K_2O$ is below 1.5 %. It is the same as the composition of natron glass and its share is the lowest as 7.9 %. Of these, type III is divided into two types according to the content of MgO and $K_2O$. It is identified that manufacturing technique of type I and II is drawing and type III is casting method with microscopic investigations. Type II and III is estimated that raw materials is different because is confirmed in the majority of ruins in spite of the fact that distribution ratio is very low. So, red brown glass beads distributed in Korea Peninsula are divided into three types of glass culture.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.20 no.1
• /
• pp.43-52
• /
• 2010

Glass was fabricated by using refused coal ore obtained from Dogye coal mine in Samchuk. We additionally used soda ash and calcium carbonate as raw materials to make a glass with the chemical composition of soda-lime glass. And the properties of glass were measured when limestone was used as natural raw materials instead of calcium carbonate as chemical raw materials. Transparent glass was fabricated by melting raw materials at $1550^{\circ}C$ for 1 hr in an electrical furnace. The various kinds of glass samples were fabricated according to the kinds of refused coal ore and glass cullet. The optical properties of transmittance and color chromaticity were measured by UV/VIS/NIR spectrometer and the thermal properties of thermal expansion coefficient and softening point were measured. Transparent glass with the transmittance of over 70% in visible range was fabricated by using normal refused coal ore and black colored glass with the transmittance of 0~35% was fabricated by using shel1 type refused coal ore. Therefore, it is concluded that refused coal ore can be used for raw materials to manufacture secondary glass products such as a glass tile and foamed glass panel for construction material.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.32 no.6
• /
• pp.246-250
• /
• 2022

An estimation method of glass viscosity using Lakatos model is one of the best way to calculate the viscosity of soda-lime glass. The glass viscosity is obtained by inputting a glass composition consisting of SiO₂, Al₂O₃, Na₂O, K₂O, CaO and MgO to the Lakatos model. A series of composition of glass bottles was obtained once a month for 10 months from a soda-lime glass bottle fabrication line and isokom temperatures at the viscosity of log η = 3, 6.6, 10 and 12.3 were calculated. It was found that the isokom temperature at log η = 3 and log η = 6.6 was closely related to the value of (Si+Al)/O and 1/Na, respectively.

• Journal of the Microelectronics and Packaging Society
• /
• v.9 no.1
• /
• pp.49-52
• /
• 2002

This study demonstrated the feasibility of tape casting method to fabricate soda borosilicate glass-coated stainless steel electrostatic chucks(ESC) for low temperature semiconductor processes. Glass coating on the stainless steel substrate was 125 $\mu\textrm{m}$ thick. The adhesion of glass coating was found to be excellent such that it was able to withstand temperature cycling to over $300^{\circ}C$ without cracking and delamination. The electrostatic clamping pressure generally followed the theoretical voltage-squared curve except at elevated temperatures and high applied voltages. The deviations at elevated temperatures and high applied voltages are due to increased leakage current as the electrical resistivity of glass coating drops.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2001.11a
• /
• pp.141-141
• /
• 2001