• Proceedings of the Korean Information Science Society Conference
• /
• 2006.10a
• /
• pp.143-147
• /
• 2006

자연 현상에서 나타나는 연기나 난류의 움직임을 사실적으로 시뮬레이션을 할 때 Navier-Stokes 방정식을 이용한다. 이 방정식을 이용한 구현은 방대한 연산량과 계산의 복잡성으로 인하여 실시간 시뮬레이션이 어렵다. 이 때문에 실시간 처리를 위하여 복잡한 수식을 근사화한다. 유체 시뮬레이션의 이류(advect) 과정에서 근사화를 위해 Semi-Lagrangian 방법을 이용할 때, 연기 시뮬레이션은 시간이 지남에 따라 밀도가 현저히 줄어들고 소규모의 소용돌이(small-scale vorticity) 현상이 급격히 감소하는 등의 수치적 소실이 발생한다. 본 논문에서는 이 문제를 해결하기 위해 이류항(advection term)을 계산할 때 새로운 수치적 방법을 제안한다. 본 논문에서는 이류항의 값을 구할 때, 현재 격자 주변의 값 중에서 다음 단계에 현재 격자의 위치로 오는 속도를 가진 격자를 찾아, 그 격자의 속도를 이류 속도 벡터로 활용한다. 이는 밀도와 소용돌이 현상의 수치적 소실을 줄여서 사실성을 높이고 실시간 처리도 가능하게 한다. 또한 본 논문에서는 GPU 구현을 통해 벡터 연산 등의 효율성을 높이며 시뮬레이션의 속도를 향상시킨다.

• Journal of Environmental Impact Assessment
• /
• v.32 no.1
• /
• pp.15-28
• /
• 2023

In the Republic of Korea, the target project scope of the small-scale EIA is stipulated as the plan area above around 5,000~60,000m² depending on a type of project and classification of land use. Whereas, the lower limit of the corresponding local government EIA project is generally located above the small-scale EIA's limits, and overlapping ranges exist. This situation has been enlarged since road construction and district unit planning were included as the target projects for small-scale EIA in the "Enforcement Decree of the Environmental Impact Assessment Act", which was partially revised in November 2016, and the current consultation system needed discussion in that small-scale EIA is allowed to be done without gathering review opinions at the local level. In fact, projects subjected to local government EIA but consulted as small-scale EIAs may seem insignificant because of a small number of total cases; however, it is worth paying attention to the fact that a local government may not add a target project due to the small-scale EIA. This study suggested the three policy measures for improving small-scale EIA to enhance the effectiveness of local government EIA: supplementing the institutional arrangements to incorporate the review opinion from the local region in small-scale EIA, giving priority to local EIA for conducing the projects in overlapping ranges with partial amendments on EIA law regarding exceptions to local government EIA, including small target projects (not to be small-scale EIA targets) to the ordinance that are deemed necessary to be conducted as local government EIA. Even though a positive function of small-scale EIA has been confirmed, efforts should be made to improve the situation in which many projects within local governments are consulted without review from the region.

• Journal of Navigation and Port Research
• /
• v.36 no.10
• /
• pp.873-881
• /
• 2012

This study is about the case study on the application of modular system to the superstructure of floating architecture in Europe. There are many restraints in the onsite construction of floating architecture. Then, various industrialized construction methods are needed to reduce the portion of the onsite construction in floating architecture. Among the various industrialized construction methods, the modular system can be more suitable for floating architecture. At this background, this study analysed the European cases of the application of modular system and classified the types of applied modular system. As a result, this study could classify the three types of modular system, such as, building unit modular, space unit modular and planning concept modular, and define the characteristics of three types by comparing with each other.

• Journal of Navigation and Port Research
• /
• v.32 no.3
• /
• pp.215-221
• /
• 2008

Dynamic characteristics of a structure, i.e., natural frequency and mode shape, have been widely using as an input data in the area of structural integrity or health monitoring which combined with the damage evaluation and structural system identification techniques. It is very difficult, however, to get those information by the conventional modal analysis method from large structures, such as the offshore structure or the long-span bridge, since the source of vibration is not available. In this paper, a method to obtain the frequencies and the mode shapes of a large span truss structure using only acceleration responses is studied. The calculation procedures to obtain acceleration responses and frequency response functions are provided utilizing a numerical model of the truss, and the process to extract natural frequencies and mode shapes from the modal analysis is cleary explained. The extracted mode shapes by proposed method are compared with those from eigenvalue analysis for the estimation of accuracy. The validity of the mode shapes is also demonstrated using an existing damage detection technique for the truss structure by simulated damage cases.

• Journal of Navigation and Port Research
• /
• v.37 no.4
• /
• pp.439-445
• /
• 2013

Domestic large group logistics company(2nd-party logistics company)has made inroads on large portion of domestic logistics market, whereby the domestic 3rd-party logistics market has been shrinking every year to a level of 30% or so. Global logistics enterprise is steadily increasing 3rd-party global market portion while Local one facing with stagnating growth has very minimal level in the global market share. Fortunately new government strengthening policy change toward local SME and also recent UN's supplying line enlargement to Asia regions are positive factors which make Local SME very positive environments to advance to UN procurement logistics market. On this occasion, the purpose of this paper is to help local logistics company perform successful bidding through study of UN-transportation case and also suggest in SWOT analysis a segmented measure and support policy between Industry, Academia, Government and Institute.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2021.11a
• /
• pp.101-103
• /
• 2021

With the rapid increase in the quantity of goods transported worldwide, companies are now started to show great interest in unmanned automated warehouses along with related research and development due to the increase of warehouse efficiency and reduction warehouse manpower. In a number of small warehouses, shuttle rack-based layouts that can handle inventory flow flexibly. However, the shuttle rack-based logistics center does not operate in case of emergency situations (faults, power outages, etc.), which seriously affects the efficiency and inventory management of the entire logistics center. Accordingly, in shuttle rack-based logistics center, we have classified various shuttle passages and RTV passages by layout and have analyzed its characteristics and types, along with derived reliability for each layout. The loading rate was also derived differently according to the number of passages, and have compared and analyzed reliability and loading rate for each layout.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2007.12a
• /
• pp.141-142
• /
• 2007

In recent years, the rate of mean sea level rise is increasing rapidly from the phenomena of global warming, together with the increasing trend of the storm scale. The issue of sea level rise is multifaceted and produces a range of environmental problems. Especially, high tides and the tidal currents become higher, and wave base increases, so the energy received at the coastal boundary may increase. This brings that many coastal environments go into disequilibrium, such as damages to the structures, erosion, and deposition Similarly it was known that the problems of nearshore processes and damage of berth and counter facilities during storm period had appeared at the small fishery port. Here we try to analyze the impact of the rearrangement of counter facilities and berth layout adopted for tranquility of its'inner harbor. Because this harbor is being connected to channel and open sea, the rearrangement of the structures might affect to the current speed and direction and wave height, so do to the sea bottom undulation. Therefore, we made model test for the several layouts of the berth and breakwater in this area.

• Journal of Navigation and Port Research
• /
• v.33 no.10
• /
• pp.703-707
• /
• 2009

In order to evaluate applicability of cylindrical slit type block breakwater to the field water, which was designed from the previous physical model study, it is analyzed the calmness of harbor area by the numerical model experiment. For a small fishery port in southern coast of Korea a SWAN model using the wave action balance equation was formulated. The reflection and transmission coefficients induced by the physical model test were introduced to the numerical model. The model response with cylindrical slit type breakwater was compared with the impermeable breakwater case and the possibility of water quality improvement through the water circulation by the new structure was investigated. For numerical simulation, parameters of deepwater design wave from the prediction report II for overall deepwater design wave by KORDI were used and wind parameters from the 50years return period observed for 37years(1970~2006) were adopted in the numerical model. The response of west breakwater in Mijo port applying the NE and NNE waves, which were dominant in this area, was analyzed. It was found that the transmission characteristic of designed cylindrical slit breakwater was well presented in the numerical model.

• The KIPS Transactions:PartA
• /
• v.14A no.4
• /
• pp.191-196
• /
• 2007

In the field of computer graphics, Navier-Stokes equations would be used for realistic simulations of smokes and currents. However, implementations derived from these equations are hard to achieve for real-time simulations, mainly due to its massive and complex calculations. Thus, there have been various attempts to approximate these equations for real-time simulation of smokes and others. When the advection terms of the equations are approximated by the Semi-Lagrange methods, the fluid density can be rapidly reduced and small-scale vorticity phenomena are easy to be missed, mainly due to the numerical losses over time. In this paper, we propose an improved numerical method to approximately calculate the advection terms, and thus eliminate these problems. To calculate the advection terms, our method starts to set critical regions around the target grid points. Then, among the grid points in a specific critical region, we search for a grid point which will be advected to the target grid point, and use the velocity of this grid point as its advection vector. This method would reduce the numerical losses in the calculation of densities and vorticity phenomena, and finally can implement more realistic smoke simulations. We also improve the overall efficiency of vector calculations and related operations through GPU-based implementation techniques, and thus finally achieve the real-time simulation.

• Journal of the Korean Institute of Gas
• /
• v.22 no.6
• /
• pp.59-64
• /
• 2018

As part of measures to reduce fine dust, the government is promoting a project to convert the fuel of Yard Tractors(YT, tractors operated at ports), from diesel to LNG (Liquefied Natural Gas). While a port having a small number of yard tractors, it is not proper to construct a stationary LNG fueling station and supply LNG to YT due to a problem of BOG (Boil off gas) generation. Therefore, it is necessary to make a regulation and a standard on mobile LNG YT refueling station installation and inspection as an alternative. In this study, we have investigated domestic and foreign mobile LNG refueling cases and refueling standards, including the USA and Europe. In addition, we have suggested the risk reduction method according to the cause after investigation of the cause of LNG accidents. And last, based on the proposed risk reduction measures, we have proposed an amendment to the Regulation of the Urban Gas Business Law in Korea. The proposed mobile LNG YT refueling amendment of the Regulation includes ; maintenance of the safety distance from the protection facility, installation of an interlock device to prevent refueling in places other than the authorized place, installation of the identification system through biometrics, separation of the tank lorry and tow vehicle before refueling, checking the wheel fixed status of tank lorry before refueling, construction of the impounding area, safety measures before, during and after refueling, etc. The safety standards proposed in this study could be used as a reference in establishing standards for mobile LNG vehicle refueling in the near future.