• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.32 no.6D
• /
• pp.655-662
• /
• 2012

The aim of this study is to analyze tthe pattern of compacted area and the distribution characteristics in one-person household. Through ArcGis, we collect the basic data and classify the compact area in accordance with the pattern employing Ward method out of cluster analysis. The main results are found as follows; First, the station sphere type is located around Seomyun and Nampo-dong, which are the main CBD( Central Business District) This type must be essentially considered in residential plan for one-person household location. Second, the district oriented type is located around the subway and it has relatively better residential facilities and environments. Third, it is found that the younger worker including students resided in one room and villa in the type around university. Forth, the foreign workers and domestic workers in small and medium factory resided in the factory centered type which is far from the station sphere. Lastly, it is dormitory type which is isolated from the CBD, and insteadly amenable and well natural environment area, but students and workers in this area where there are lacking life-related facilities and aside from accessibilities feel uncomfortable.

• Proceedings of the Korean Environmental Health Society Conference
• /
• 2002.04a
• /
• pp.23-25
• /
• 2002

This study was conducted to understand characteristics of wastewater which is discharged from small-scale dyehouse located in Seoul downtown area and to Find the appliable treatment method on the spot. The results of this study were summarized as followings. 1. The method which is used at present is mostly flocculation by coagulant or fenton oxidation. But the treatment efficiency of them are not good. 2. The results of fenton oxidation experiment demonstrated that treatment efficiency of COD was limited, which showed the need of the additional process or the improvement of existing treatment method, while the color was reduced considerably in optimal condition. 3. The optimal condition of fenton oxidation are as followings. -Feasible pH was in the 3∼4 regardless of the kinds of iron ions, But the fluctuation of treatment efficiency with the change of pH was small - The mass ratio of H$_2$O/CODcr was used to evaluate the parameter of H$_2$O$_2$ The optimal range of this was in 0.7∼1,3 and it was observed that the ratio got higher as the quality got worse. -For iron ion, FeCl$_2$4H$_2$O turned out to be more effective for removal of color compared with was compared FeSO$_4$7H$_2$Oin. the mass ratio of Fe/H$_2$O$_2$ of 2.3∼2.8 for of FeSO$_4$7H$_2$O and 1.6∼1.8 for FeCl$_2$4H$_2$O resulted in good treatment efficiencies. 4. With adsorption process applied before fenton oxidation in order to treat the high concentration wastewater, the treatment efficiency increased by 61％ in CODcr, 55％ in color. and if the power activated carbon is injected in more than 2500mg/$\ell$, the wastewater can be treated within the effluent quality criteria.

• Journal of Wetlands Research
• /
• v.22 no.3
• /
• pp.178-186
• /
• 2020

In this study, the elasticity was calculated and sensitivity analysis was performed using air-water temperature data of the major tributaries of the Nakdong River. We developed a nonparametric elasticity analysis technique capable of estimating the confidence interval for elasticity and verifying the hypothesis, and examined its applicability compared to the existing method using the median value. It is analyzed that the elasticity of winter is low and the elasticity of summer and autumn is high, so that the fluctuation of water temperature and water quality according to the fluctuation of air temperature is large. The spatial elasticity tends to be low in the Geumho River area, which is influenced by artificial factors such as sewage treatment plant effluent, small and medium-sized livestock wastewater, and small-scale factory wastewater. Since the elasticity of major tributaries of the Nakdong River is over weak and is reasonable at a significance level of 5%, it was analyzed that the air-water temperature fluctuation caused by climate changes is large.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.8 no.5
• /
• pp.1289-1299
• /
• 2007

As higher on the industrialization of chemical factories in Korea, it shows a tendency that safety accident happens more times and is bigger on its size. For preventing from and decreasing such accident, PSM(Process Safety Management) system has used in chemical factories. Though it is recognized that PSM is sutable and effective for only a intensive system technically, it could be difficult to apply to all of factories, actually. This study was proceeded for investigating the effect and problems on the application and performanance of PSM into the threshold quantity site and suggesting how fur improvement. The results are as followed; PSM system was not used effectively in the threshold quantity site of medium and small-sized enterprises because of the shortage of experts and the decrease of interest as a deregulation. As the effective performanace of PSM for preventing from industrial accident in threshold quantity site and for sattling as self-system easily, it was concluded to get an active support from the concerned government. First of all, new progrems to improve PSM should be developed continually and the progrems should be educated extensively.

• The Transactions of the Korea Information Processing Society
• /
• v.4 no.11
• /
• pp.2914-2922
• /
• 1997

For FA (factory automation) and ATE (automatic test equipment) in the industrial area, the standard bus needs to increase the system performance of multiprocessor environment. VME(versa module european package format) bus is appropriated to the standard bus but has features of small package and low board density. Beside, the density of board and semiconductor have grown to become significant issues that affect development time, project cost and field diagnostics. To fit this trend, in this paper, we composed Revision C.1 (IEEE std. P1014-1987) of the integrated environment for the main function such as arbitration, interrupt and interface between, VMEbus and several control modules Also the designed, VME system controller is implemented on FPGA that can be located even into slot 1. The control and function modules are coded with VHDL mid-fixed description method and then those operations are verified by simulation. As a result of experiment, we confirmed the most important that is the operation of Bus timer about Bus error signal should occur within $56{\mu}m$, and both control and function modules have the reciprocal operation correctly. Thus, the constructed VHDL library will be able to apply the system based VMEbus and ASIC design.

• Resources Recycling
• /
• v.1 no.1
• /
• pp.44-50
• /
• 1992

The $\alpha$-FeOOH powders were prepared by allkaline and acidic method on the small scale plant from the waste pickling liquor of iron. $\alpha$-FeOOH, $\alpha-Fe_2O_3$, $Fe_3O_4$ and ${\gamma}-Fe_2O_3$ powders were examined by TEM, SEM, TG-DTA, X-ray diffraction, VSM and chemical analysis. The results obtained from the experiment could be summerized as follows : the reaction time for the preparation of $\alpha$-FeOOH was observed to be smaller in the case of alkaline method and the products was acicular with the size of about $0.5\mu\textrm{m}$. The color of $\alpha-FeOOH and $\alpha-Fe_2O_3$was lovely yellow and red, respectively. The magnetic properties of $Fe_3O_4$ obtained by the reduction of $\alpha-Fe_2O_3$in the $H_2$ atomosphere at $370^{\circ}C$ for 1 hour showed 367(Oe) and 82.7(emu/g).

• The KIPS Transactions:PartD
• /
• v.16D no.4
• /
• pp.613-620
• /
• 2009

It is necessary to develop a system of judging whether or not the parts are defective easily at low cost, especially in a small scale factory which manufactures a large variety of products in small amounts. To develop such system, we require to recognize objects using human's cognitive ability under various circumstances. Human's high intelligence originates mostly from neocortex of human brain. The HTM theory, which is proposed by Jeff Hopkins, is one of the recent researches to model the operation principle of neocortex. In this paper we developed PRESM (Parts image REcognition System for small scale Manufacturing industry) system based on the HTM theory to judge badness of manufactured products. As a result of application to the real field of workplace environments we identified the superiority of our recognition system.

• Korean Journal of Construction Engineering and Management
• /
• v.22 no.3
• /
• pp.31-39
• /
• 2021

The modular construction method is an off-site construction method using built-in structures from the manufacturing facilities. Modular construction is commonly applied to buildings which have relatively smaller and simpler structures than other types of buildings. Although modular building has emerged in the domestic construction industry as an alternative building strategy, previous researches on the environmental characteristics of modular building has not been comprehensively studied. Thus, this study empirically analyzed the insulation performance of thermal bridge and condensation parts of the modular buildings by using IR image analysis, Air-Surface Temperature Ratio method, and temperature difference ratio. The insulation performance analysis was conducted by comparing a modular building and a RC building in Seoul. The results shows that there was no significant difference between insulation performances of RC building and modular building. Furthermore

• KSBB Journal
• /
• v.23 no.1
• /
• pp.1-7
• /
• 2008

The world demand of ethanol as an alternative fuel for gasoline is increasing rapidly because of high oil price and global climate change. Most of ethanol is currently produced from corn grain or sugars in sugarcane and sugar beet. Because these sources compete with foods and animal feed and are not expected to be enough for future demand of ethanol. Thus, cellulosic ethanol from agricultural residues or wood has to be commercialized in near future. Typical cellulosic ethanol production consists of pretreatment, enzyme hydrolysis, fermentation and product separation. This paper reviews the principles and status of each step and discusses issues for cellulosic ethanol production.

• Journal of Digital Convergence
• /
• v.10 no.10
• /
• pp.221-227
• /
• 2012

In Korea, ocean dumping has been widely used as the ultimate disposal of sewage sludge. However, ocean dumping of food wasted and sewage sludge from 2013 is expected to legally restricted as London convention on marine pollution prevention has been effective in 2009. This research aims to examine the effect of HEAS in treating the environmental pollution load caused by organic high concentrated sludge. Thus, onsite laboratory scale treatability test using HEAS was adopted to treat the high concentrated organic sludge from sewage and industrial wastewater treatment plant. The research results showed that the HEAS is useful to reduce the environmental pollution caused by organic high concentrated sludge. Specific results are as follows. 1. The organic removal after the sludge digestion using the high efficiency aeration system was 55.2-85.8%. Although these results were lower than those from the general sewage treatment, the high efficiency aeration system could be evaluated as efficient, considering the object sludge contained the industrial waster water. 2. The average removal efficiency was about 25.2%. 3. It was revealed that sludge digestion by the high efficiency aeration system could effectively contribute to the sludge treatment cost. Especially, the high efficiency aeration system is more applicable to the onsite treatment of small sewage and wastewater treatment plant that contains high solid content sludge, industrial wastewater sludge, high fixed solid sludge.