• Title/Summary/Keyword: 셀 유동

Search Result 111, Processing Time 0.022 seconds

Transition of Natural Convective Flows Subjected to Small-Wave-Number Sinusoidal Wall Temperatures with Phase Difference (위상 차이가 있는 작은 파동수의 정현적인 벽면 온도 하에서의 자연 대류 유동의 천이)

  • Yoo, Joo-Sik
    • 대한공업교육학회지
    • /
    • v.33 no.2
    • /
    • pp.300-311
    • /
    • 2008
  • This study investigates the natural convection of air(Pr=0.7) between two walls having a small- wave- number sinusoidal temperature distributions with a phase difference. The wave number and the phase difference of wall temperatures are k=0.5 and ㄱ/2, respectively. In the conduction-dominated regime at small Rayleigh number, two slightly inclined cells are formed over one wave length. At higher Rayleigh number, however, multicellular convection occurs in thermally unstable region. A spatial symmetry is intermittently broken in the transient period at the Rayleigh number near the critical value. The steady-state flows always satisfy the spatial symmetry. A steep increase of Nusselt number occurs near the Rayleigh number at which transition of flow pattern occurs.

Investigation of Heat Transfer Performance in Corrugated Plate Heat Exchanger Utilizing Liquid Crystal Method (액정법을 이용한 주름형상 판형열교환기의 열전달 성능해석)

  • 박성봉;이재용;김남진;김종보;서태범
    • Journal of Energy Engineering
    • /
    • v.9 no.4
    • /
    • pp.328-333
    • /
    • 2000
  • 이 연구의 목적은 액정법을 이용하여 주름형상 판형 열 교환기에서의 내부유동과 열 전달 성능의 특성을 파악하는데 있으며 공기를 작동유체로 사용하였다. 과거에는 실험이 주로 판형 열 교환기의 입·출구에서의 열 전달 성능에만 관심이 집중되었다. 그러나 이 실험에서는 액정법을 이용하여 판형열교환기 셀 표면 위에서의 국소 누셀트수의 분포를 연구하였다. 레이놀즈수가 증가할수록 열 전달 성능은 증가하였으나 마찰계수는 감소하였다. 주름각이 증가할수록 열 전달 성능과 마찰계수는 모두 증가하였다. 국소 누셀트수 분포로부터 열 전달이 잘 일어나는 부분은 주름을 타고 넘어 들어온 두 유동이 만나는 곳이며 또한, 셀의 가운데 부분은 셀의 수직단면적이 커서 셀 표면과 유동의 접촉이 약하므로 작은 누셀트수를 가지는 것을 알 수 있다.

  • PDF

Flow Control on Wind Turbine Airfoil with a Vortex Cell (와류 셀을 이용한 풍력블레이드 에어포일 주위 유동 제어)

  • Kang, Seung-Hee;Kim, Hye-Ung;Ryu, Ki-Wahn;Lee, Jun-Shin
    • Journal of the Korean Society for Aeronautical & Space Sciences
    • /
    • v.40 no.5
    • /
    • pp.405-412
    • /
    • 2012
  • A flow control on airfoil installed a vortex cell for high efficiency wind turbine blade in stationary and dynamic stall conditions have been numerically investigated by solving the compressible Navier-Stokes equations. The numerical scheme is based on a node-based finite-volume method with Roe's flux-difference splitting and an implicit time-integration method coupled with dual time step sub-iteration. The computed result for the airfoil in the stationary showed that lift-drag ratio increases due to low pressure by the vortex cell. The oscillating airfoil with the vortex cell showed that the magnitude of hysteresis loop is reduced due to the enhanced vortex in the cell.

Three-dimensional Detoantion Wave Dynamics in a Circular Tube (원형 관 내부에서의 3차원 데토네이션 파의 동적모형)

  • Cho, Deok-Rae;Won, Soo-Hee;Shin, Jae-Ryul;Choi, Jeong-Yeol
    • Journal of the Korean Society of Propulsion Engineers
    • /
    • v.12 no.3
    • /
    • pp.68-75
    • /
    • 2008
  • The three-dimensional structure of detonation wave propagating in a circular tube was investigated using a parallel computational code developed previously. A series of parametric study for a circular tube of a fixed diameter gave the formation mechanism of the detonation cell structures depending on pre-exponential factor, k. The unsteady results in three-dimension showed the mechanisms of two, three and four cell mode of detonation wave front structures. The detonation cell number was increased but cell width and length were decreased with increased pre-exponential factor k. In the all multi-cell mode, the detonation wave structure and smoked-foil records on the wall are made by the moving of transverse waves. The detonation wave front structures have the regular polygon and windmill shapes periodically.

Free Convective Transition of Intermediate Prandtl-Number Fluids in a Wide-Gap Horizontal Annulus (넓은 수평 환형 공간에서의 중간 Prandtl수 유체의 자연 대류의 천이)

  • Yoo, Joo-Sik
    • Transactions of the Korean Society of Mechanical Engineers B
    • /
    • v.24 no.2
    • /
    • pp.169-176
    • /
    • 2000
  • Natural convection in a wide-gap horizontal annulus is considered, and the transition of flows and the bifurcation phenomenon are investigated for the fluids with Pr=0.2 and 0.3. At Pr=0.2, a bicellular flow pattern is observed at high Rayleigh number, and the solution is unique. At Pr=0.3, both the steady unicellular and bicellular flows exist above a certain critical Rayleigh number. For the fluids of Pr=0.2, the bicellular flow can be obtained by the impulsive heating of the inner cylinder, but it is not obtained from the zero initial condition for Pr=0.3. Hysteresis phenomena have not been observed. A transition from a bicellular flow to a unicellular flow occurs for Pr=0.3.

NUMERICAL SIMULATION OF INCOMPRESSIBLE LAMINAR ENTRY FLOWS IN A SQUARE DUCT OF $90^{\circ}$ BEND BY UNSTRUCTURED CELL-CENTERED METHOD (비정렬 셀 중심 방법에 의한 정사각형 단면을 갖는 $90^{\circ}$ 곡관 층류유동의 수치해석)

  • Myong H. K.;Kim J. E.
    • 한국전산유체공학회:학술대회논문집
    • /
    • 2005.10a
    • /
    • pp.81-85
    • /
    • 2005
  • Three-dimensional steady incompressible laminar entry flows in a square duct of $90^{\circ}$ bend are numerically simulated by a new solution code(PowerCFD) using unstructured cell-centered method. Solutions are obtained with three unstructured grid types of hexahedron, prism and hybrid at a Reynolds number, based on the hydraulic diameter and bulk velocity, of 790. Interesting features of the flow are presented in detail. Detailed comparisons between the computed solutions and the available experimental data are given mainly for the velocity distributions at cross-sections in a $90^{\circ}$ bend of a square duct with fully-developed entry flows. It is found that the code is capable of producing the nature of laminar flow in curved square duct with no grid type dependency.

  • PDF

Nemerical Analysis of Natural Convection in a Confined Stratified Fluid (밀폐용기내 성층화된 유체의 자연대류에 관한 수치적 연구)

  • 현명택;이진호;모정하
    • Transactions of the Korean Society of Mechanical Engineers
    • /
    • v.13 no.6
    • /
    • pp.1321-1329
    • /
    • 1989
  • 본 논문에서는 성층화된 용액ㅇ네 수평방향으로 온도구배가 가해지는 경우에 있어서 두 부력인자의 상대적 크기에 따라 나타나는 유동형태와 그에 따른 온도, 농도 분포 및 열전달특성을 수치적으로 연구하고자 한다.

Numerical Simulation of the Fully Developed Flow and Heat Transfer of a Plate Heat Exchanger Taking into Account Variation in the Corrugation Height (주름높이의 변화를 고려한 판형열교환기의 완전발달유동 및 열전달 수치해석)

  • Moh, Jeong-Hah
    • Transactions of the Korean Society of Mechanical Engineers B
    • /
    • v.36 no.1
    • /
    • pp.1-8
    • /
    • 2012
  • Numerical analysis has been carried out to investigate the fully developed flow and heat transfer characteristics of a plate heat exchanger. Multi-cell models with an inlet part and outlet part are used to perform the numerical simulation. The plate heat exchanger is characterized by a chevron angle of $20^{\circ}$ and a P/H ratio of 2.0~4.0. The working fluid is water and the Reynolds numbers range from 300 to 1,500. The correlation is given in the form of $f=CRe^m$ for the friction factor and $j=CRe^m$ for the Colburn factor. It is found that the fully developed flow starts from the third cell and the Nusselt number increases with decreasing P/H ratios.

A GFR Service of fairness Improvement Algorithm in hybrid Network (혼합 망에서 GFR 서비스의 공평성 향상 알고리즘)

  • 송선희;석경휴;김문환;김철영;배철수;나상동
    • Proceedings of the Korean Institute of Information and Commucation Sciences Conference
    • /
    • 2004.05b
    • /
    • pp.386-390
    • /
    • 2004
  • 유무선 혼합 망에서 GFR서비스의 최소대역, 효율 및 트래픽 제어를 위한 버퍼관리 기법 등을 유무선 혼합망의 셀기반 네트워크에서 가중치를 높이는 시뮬레이션을 통해 공평성을 입증하는 연구를 한다. GFR서비스는 TCP/IP 패킷의 품질보장과 베스트 에포트 트래픽에 대한 최소의 대역폭 보장을 하며, 가용 대역폭에 대한 공평성 있는 대역할당을 지원해야 하기 때문에 버퍼관리를 통한 셀 폐기와 셀 스케줄링 둥이 중요한 요소이다. 본 논문에서는 유무선 혼합 네트워크에서 MCR을 보장하기 위하여 버퍼의 사용 가능한 영역의 활성 VC에 각 VC가중치를 비례해 할당하는 per-VC 어카운트에 기초한 트래픽 제어의 버퍼관리에 대한 유동적 WBA알고리즘을 제안하고 GFR 서비스의 효율 및 공평성을 유무선 혼합 망 셀 기반의 스위치를 이용하여 시뮬레이션으로 결과를 보인다.

  • PDF