• The Transactions of the Korea Information Processing Society
• /
• v.4 no.6
• /
• pp.1433-1442
• /
• 1997

Algorithm design is needed to optimized bandwidth which satisfy quality of service(QoS) requirements of vary traffic classes for Multimedia service in ATM networks. The diverse flow characteristics e.g., burstiness, bit rate and burst length, have to guarantee the different quality of service(QoS) requirements in Asynchronous Transfer Mode(ATM). The QoS parameter may be measured in terms of cell loss probability and maximum cell dely. In this paper, we consider the ATM networks which the virtual path(vip) concept is implemented by applying the Markov Modulated Deterministic Process method. We develop an efficient algorithm to computer the minimum capacity required to satisfy all the QoS requirements when multiple classes of on-off source are multiplexed on single VP. Using above the result, we propose a simple algorithm to determine the VP combination to achieve the near optimum of total capacity required for satisfying the individual QoS requirements. Numerical results are also presented to demonstrate the performance of the algorithm, when compared to the optimal total capacity required.

• Food Science and Preservation
• /
• v.14 no.5
• /
• pp.451-456
• /
• 2007

The vitamin C content in extruded comstarch matrix was shown to depend on extrusion process variables (barrel temperature and water content), the packaging method, and the storage period. In addition, loss rates of vitamin C under different processing conditions were calculated. Extrusion process variable were barrel temperature ($80^{\circ}C,\;90^{\circ}C,\;100^{\circ}C$ and $110^{\circ}C$), and water content (25% 30% both w/w). The vitamin C content decreased as barrel temperature increased from $80^{\circ}C$ to $110^{\circ}C$ and water content increased from 25% to 30% when either LDPE plastic film packaging or ON film vacuum packaging were employed. As barrel temperature and water content increased, vitamin C decreased in comstarch packed in either LDPE film or ON film. As temperature increased, vitamin C loss rate increased under both packaging conditions, but the loss tate was only 50% of the LDPE film packaging rate when ON film vacuum packaging was used. In conclusion, the higher the temperature, and the greater the water content, the less vitamin C was inactivated during extrusion cooking, although the loss rah of vitamin C became faster as temperature and water content rose. In conclusion, extrusion process could be applied for making vitamin C matrix to extend vitamin C preservation.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.37 no.6
• /
• pp.381-381
• /
• 2000

In this paper, we propose a real-time bandwidth allocation scheme of multiplexed VBR MPEG video sequences over ATM network. In order to real time processing, multiplexed source is estimated by linear-prediction per measurement period. If the result CLR value were not sufficient, we proposed a overallocation method and a reallocation one to guarantee QoS. We used two kinds of sources, one is random multiplexed source made of foot different video sources, the other is the one considered the arrange of I frame in the sequence. With those sources, we analyzed the linear prediction, compared overallocation with reallocation method. As a result, in both schemes, the objected CLR value is achieved, the sufficient value COR under 10% when mp is over 1.8 sec, the utilization is over 0.9. Especially, the COR value of the reallocation scheme is better at the same condition.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.37 no.6
• /
• pp.21-27
• /
• 2000

In this paper, we propose a real-time bandwidth allocation scheme of multiplexed VBR MPEG video sequences over ATM network. In order to real time processing, multiplexed source is estimated by linear-prediction per measurement period. If the result CLR value were not sufficient, we proposed a overallocation method and a reallocation one to guarantee QoS. We used two kinds of sources, one is random multiplexed source made of foot different video sources, the other is the one considered the arrange of I frame in the sequence. With those sources, we analyzed the linear prediction, compared overallocation with reallocation method. As a result, in both schemes, the objected CLR value is achieved, the sufficient value COR under 10% when mp is over 1.8 sec, the utilization is over 0.9. Especially, the COR value of the reallocation scheme is better at the same condition.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.11 no.2
• /
• pp.144-149
• /
• 2018

The eggs are incubated for 18 days through the generator and incubated in the developing incubator. During the developmental period, the weight loss of the fetus is correlated with the ventricular formation, and the proper ventricular formation is also associated with the healthy embryonic hatching and the egg hatching rate. However, in the incubator period of the domestic hatchery, it is a reality to acquire the resultant side by the Iranian standard weight measurement with the experience of the hatchery and the person concerned and the development period without the apparatus for measuring the present weight. As a result, prevalence of early mortality, hunger and illness during hatching are frequent. Monitoring the reduction of weaning weight is crucial to obtaining chick quality and hatching performance with weight changes within the development machine. Water loss is different depending on the size of eggs, egg shell, and elder group. We can expect to increase the hatching rate by measuring the weight change in real time and optimizing the ventilation change accordingly. There is a need to develop a real-time measurement system that can control 10 to 13% reduction of the total weight during hatching. The system through this study is a way to check the one - time directly when moving the existing egg, and it is impossible to control the measurement of the fetal water evaporation within the development period. Unlike systems that do not affect the hatching rate, four load cells are connected in parallel on the Arduino sketch board and the AT-command command is used to connect the mobile phone and computer in real time. The communication speed of Bluetooth was set to 15200 to match the communication speed of Arduino and Hyper-terminal program. The real - time monitoring system was designed to visually check the change of the weight of the fetus in the artificial incubator. In this way, we aimed to improve the hatching rate and health condition of the hatching eggs.

• Korean Chemical Engineering Research
• /
• v.57 no.5
• /
• pp.695-700
• /
• 2019

n this study, the evaluation of performance of AORFB using anthraquinone derivative and TEMPO derivative as active materials in neutral supporting electrolyte with various membrane types was performed. Both anthraquinone derivative and TEMPO derivative showed high electron transfer rate (the difference between anodic and cathodic peak potential was 0.068 V) and the cell voltage is 1.17 V. The single cell test of the AORFB using 0.1 M active materials in 1 M KCl solution with using Nafion 212 membrane, which is commercial cation exchange membrane was performed, and the charge efficiency (CE) was 97% and voltage efficiency (VE) was 59%. In addition, the discharge capacity was $0.93Ah{\cdot}L^{-1}$ which is 35% of theoretical capacity ($2.68Ah{\cdot}L^{-1}$) at $4^{th}$ cycle and the capacity loss rate was $0.018Ah{\cdot}L^{-1}/cycle$ during 10 cycles. The single cell tests were performed with using Nafion 117 membrane and SELEMION CSO membrane. However, the results were more not good because of increased resistance because of thicker thickness of membrane and increased cross-over of active materials, respectively.

• Journal of KIISE:Information Networking
• /
• v.27 no.2
• /
• pp.206-218
• /
• 2000

Retransmissions on the DLC layer are essential to ABR service providing the low CLR (cell loss ratio) over the unreliable wireless channel with high bit error rate. In the wireless ATM, the DLC layer below ATM layer performs the retransmission and reordering of the cells to recover the cell loss over the wireless channel and by doing so, the effect of the wireless channel characteristics with high bit error rate can be minimized on the ATM layer which is designed under the assumption of the low bit error rate. We propose, in this paper, the schemes to reflect the changes of the transmission rate over the wireless channel on the ABR rate control. Proposed scheme can control the source rate to the changes of the transmission rate over the wireless channel and reduce the required buffer size in the AP (access point). In the simulation, we assume that the DLC layer can inform the ATM layer of the wireless channel quality as good or bad. Our simulation results show that the proposed schemes require the smaller buffer size compared with the existing scheme, enhanced dynamic max rate control algorithm (EDMRCA). It is also shown that the scheme with the intelligent DLC which adjusts the rate to the wireless channel quality not only provides the low CLR with smaller buffer requirement but also improves the throughput by utilizing the wireless bandwidth more efficiently.

• The Transactions of the Korea Information Processing Society
• /
• v.5 no.11
• /
• pp.2954-2972
• /
• 1998

It is expected that the transport of compressed video will become a significant part of total network traffic because of the widespread introduction of multimedial services such as VOD(video on demand). Accordingly, VBR(variable bit-rate) encoded video will be widely used, due to its advantages in statistical multiplexing gain and consistent vido quality. Since the transport of video traffic requires larger bandwidth than that of voice and data, the characterization of video source and traffic modeling is very important for the design of proper resource allocation scheme in ATM networks. Suitable statistical source models are also required to analyze performance metrics such as packet loss, delay and jitter. In this paper, we analyzed and described on the characterization and traffic modeling of MPEG video sources. The models are broadly classified into two categories; i.e., statistical models and deterministic models. In statistical models, the models are categorized into five groups: AR(autoregressive), Markov, composite Marko and AR, TES, and selfsimilar models. In deterministic models, the models are categorized into $({\sigma},\;{\rho}$, parameterized model, D-BIND, and Empirical Envelopes models. Each model was analyzed for its characteristics along with corresponding advantages and shortcomings, and we made comparisons on the complexity of each model.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.2
• /
• pp.850-857
• /
• 2013

The objective of this paper is to provide service continuity based on an efficient subchannel allocation in OFDMA systems. The resource management for handover are necessary to maintain the QoS requirements of different multimedia applications because the service continuity may be defected by some delay and information loss. Therefore we propose two subchannel management schemes applied to OFDMA systems. Firstly, a superposition allocation of interference subchannels is achieved by modifying a frequency reuse scheme, using co-subchannel interference principle. Secondly for handover applications, we suggest a novel subchannel reservation scheme to adjust the number of allocated channels, depending on the different characteristics and diverse quality of mobile multimedia applications. Simulation results show that the total throughput for the proposed method is increased up to 20% at average and peak arrivals and the handover failure rate is decreased to about 25%, as compared to the conventional method.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.23 no.6
• /
• pp.1514-1525
• /
• 1998

Two main characteristics of VBR MPEG video traffic are different statistics according to different picture types and the periodic traffic pattern due to GOP structure. Especially, the I-pictures at the beginning of each GOP generate $$\mu$h more traffic than other pictures. When several VBR Mpeg video sources are superposed, the I-picture starting times of these sources may significantly affect the cell loss characteristics of ATM $$\mu$tiplexers. In this paper, we propse a performance model for ATM $$\mu$tiplexers with VBR MPEG video sources whose starting times are arbitrary given. For analysis, both single and superposed source traffic are modeled as NDPPs (non-deterministic periodic processes), and the ATM $$\mu$tiplexer is modeled as a U-state NDPPD/D/1/B queueing system. It is hown that the numerical results are very close to the si$$\mu$ation results. From the relationships between the starting tiem distributions and the corresponding $$\mu$tiplexer performances, some considerations for designing a scheduling policy in order to obtain the maxi$$\mu$ $$\mu$tiplexing gain are presented.