• Proceedings of the Korea Information Processing Society Conference
• /
• 2001.04a
• /
• pp.473-476
• /
• 2001

본 논문에서는 HOL 블록킹 현상과 데드락을 줄이기 위해 공유 메모리 스위치를 이용하고 셀에 형태에 따라 유니캐스트 셀과 멀티캐스트 셀을 따로 저장하는 방법을 이용하여 셀의 부하를 줄이는 멀티캐스트 ATM 스위치를 제안한다. 그리고, 트래픽 셀의 손실을 줄이고, 효과적으로 출력하기 위해 제어부에서 출력 포트에 따라 스케줄링하는 기법을 택하였다. 제안한 스위치의 성능을 시뮬레이션을 통해 그 유효성을 보였다.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.15 no.25
• /
• pp.15-22
• /
• 1992

본 연구에서는 물류의 개선 및 생산율 향상을 통하여 전 생산시스템의 생산성을 향상시키기 위한 효율적인 제조셀의 설계 및 운용시에 고려하여야 할 요소를 고찰하였다. 효율적인 제조셀을 형성하는데 발생하는 문제점(부품/기계군 형성, 설비배치, 스태핑, 셀 일정계획 및 운용)을 해결하기 위하여 필요한 요소별 지침을 제시하였다. 그러나, 셀생산의 장점을 충분히 얻기 위해서는 이들 요소들은 종합적으로 고려하여야 한다.

• ETRI Journal
• /
• v.9 no.1
• /
• pp.57-64
• /
• 1987

방대하고 독자적인 시스팀 개발의 급증에 따라 대규모 집적회로의 주문형 설계가 크게 요구되어 지고 있다. 본고에서는 앞으로 그 수요가 팽창될 설계 방식인 표준 셀을 이용한 설계과정을 설명하고, 이제까지의 표준셀 라이브러리 개발 전략과 그 내용에 관해 기술한다. 또한 표준 셀을 이용한 설계 예로서 ICU(Industrial Control Unit)를 들어 다른 설계 방식에 대한 장단점을 고찰하였다.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1994.10a
• /
• pp.365-370
• /
• 1994

로드 셀의 정밀측정 에러의 가장 큰 요인은 온도에 의한 출력특성 변화이다. 본 논문에서는 주어진 어떤 온도 구간에서만 온도특성을 보상하였던 기존의 방법에 비해 보다 넓은 온도구간에서 로드 셀의 출력의 온도 특성을 보상하고 또한 출력의 온도 특성이 기존의 방식에 의한 것보다 개선된 새로운 로드셀의 온도보상 방법을 제안 하였다.

• Computational Structural Engineering
• /
• v.10 no.4
• /
• pp.4-11
• /
• 1997

본 기사에서는 호안의 안벽 및 방파제의 조성에 있어 기존 공법에 비해 경제성, 공사기간 및 시공장비 측면에서 유리하며, 특히 대수심 조건에 적합한 강판셀 공법에 대하여 소개하였다. 강판셀공법은 거치식과 근입식 공법으로 분류할 수 있으며 전자는 지반이 양호한 곳에, 후자는 지반이 비교적 연약한 부지에 적합하다. 본 기사에서는 강판셀공법의 설계절차와 실제 시공사례에 대해 소개하였다.

• Journal of Animal Science and Technology
• /
• v.50 no.2
• /
• pp.209-216
• /
• 2008

This study was conducted to investigate the effects of selenium feeding and supplementation in diet on the concentration of selenium in blood and velvet antler of spotted deer(Sika deer). Three spotted deer were fed high selenium concentration(6mg/kg DM). Absorption and retention rates of selenium were examined by evaluating selenium concentrations in feces and urine. Stress-related hormones and serum biochemical parameters in blood were also evaluated for the purpose of detecting any negative effect by the high level of selenium feeding. Eight spotted deers were randomly assigned to two groups and were fed with one of two diets for 20 days, which were with or without the addition of 6mg selenium /kg diet. Concentration of selenium in velvet antler was evaluated. Selenium concentration in blood of spotted deer fed high level selenium for 30 days was significantly increased(p<0.05), retention rate of selenium reached 59.15%. No differences in level of stress-related hormone and biochemical parameters(NEFA, ALT, AST) in blood were observed by feeding high level selenium. The diet with selenium significantly increased concentrations of selenium in top(0.11 vs 0.45ppm; p<0.001), middle(0.08 vs 0.21ppm; p<0.01) and basepart(0.08 vs 0.15ppm; p<0.05) of velvet antler.

• Journal of Animal Science and Technology
• /
• v.48 no.4
• /
• pp.603-610
• /
• 2006

This study was conducted to investigate the feeding effect of selenium provided by different sources on the physico-chemical properties of M. longissimus thoracis. Twenty Hanwoo steers(20～24 months, approximately 613kg) were assigned to 4 different feeding groups of each five, depending on the sources of selenium such as inorganic selenium(sodium selenite), organic selenium(Yeast, USA Sel-Plex), Se-SMC(Se-spent mushroom compost) and the control(no selenium). The selenium level in feed was 0.9 ppm for all groups except the control. Animals were fed with different feeding treatments for 12 weeks and slaughtered at National Livestock Research Institute. The inorganic selenium group had the highest cooking loss(CL. %) and followed by the Se-SMC group and organic selenium group. No significant differences in chemical composition, WB-shear forces, water-holding capacity(WHC) and sensory properties were found among the groups(P>0.05). There were 40% frequencies of grade A in the inorganic selenium group and followed by the organic selenium group(20%). Se-SMC group had 80% of frequencies for grade 1+ and followed by the inorganic selenium group(40%), whereas the organic selenium group and the control group had the 20% frequencies for grade 1+. From the results of this study showed that the selenium sources did not affect chemical composition, WHC and tenderness of Hanwoo steers. However, the inorganic selenium group had the highest cooking loss(%) and lowest pH when compared to the other groups.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.9
• /
• pp.2191-2198
• /
• 2013

This paper proposes a RFID cell planning scheme for indoor location-awareness. We theoretically develop four objective functions that yield objective goals significant to the optimal design of a RFID cell topology and simulation is conducted to evaluate the performance of the proposed RFID cell planning scheme. We also evaluate the performance of the proposed technique after practically installing RFID readers in an indoor space to configure a RFID cell topology. Performance evaluations are conducted in terms of the following objective goals: minimal number of RFID readers for configuring a RFID cell topology, maximal RFID cell coverage areas for indoor location-awareness, minimal overlapping cells, and maximal indoor location-awareness accuracy.

• Journal of KIISE:Information Networking
• /
• v.29 no.5
• /
• pp.466-472
• /
• 2002

We investigate the load sharing problem between the umbrella cell and the overlaid tells in hierarchical cell structure. A load sharing strategy is proposed and its performance is evaluated by simulation when it is used for transmission of the mobile Internet traffic using the High Speed Downlink Packet Access scheme. The results show that, with the proposed strategy, the microcell backs well the overlaid picocells up, especially when a specific picocell cluster suffers unusual heavy load condition. By using the strategy, we can reduce the installation cost, otherwise needed for increasing the system capacity of every picocell cluster to cope with the unusual heavy load.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.5A
• /
• pp.276-283
• /
• 2003

Most of CDMA system algorithm must be verified by simulating the cellular system consisted of many other tier cells. But it takes long time to simulate such a huge CDMA cellular system. In this paper, we propose an effective time saving simulation scheme based on wraparound technique. And we study that how our remaining cell interference compensation method works on calculating of the total interference, SIR, outage probability, and cell capacity. We made a conclusion that by using proposed scheme, we can get the same result of maximum configuration cells with only one tier real cells and that we can minimize the simulation time.