• Proceedings of the KIEE Conference
• /
• 2005.07d
• /
• pp.2870-2872
• /
• 2005

본 논문에서는 시각기반 센서 네트워크에 의해 다중물체의 위치를 인식 및 추적하여 목표물들의 위치를 결정할 수 있는 분산형 시각 시스템을 제시한다. 각 시각 센서는 칼라와 동작 정보에 의한 대상물체의 정확한 분할 및 다중물체에 대한 실시간 추적 그리고 간단한 원근법에 의한 포즈 추정을 수행한다. 각 시각 센서를 하나의 에이전트 - 시각 에이전트 -로 정의하고, 전체 시각기반 센서 네트워크를 복수 에이전트 시스템(multiagent system)으로 구성한다. 이로써 대상물체의 핸드오버시 그 대상물체의 신분에 대한 매칭 문제를 Identified Contract Net (ICN) 프로토콜을 제안하여 해결한다. ICN 프로토콜은 시각 에이전트의 개수에 독립적이고 그것을 사용할 경우 시각 에이전트들 간의 캘리브레이션도 필요로 하지 않기 때문에 시각기반 센서 네트워크의 속도, 확장성 및 모듈성을 높여준다. 실험을 통해 구성한 시각기반 센서 네트워크에서 ICN 프로토콜이 적용됨을 성공적으로 검증하였다.

• Explosives and Blasting
• /
• v.38 no.1
• /
• pp.23-29
• /
• 2020

The measurement technique with dynamic shock sensor was widely used in academic experiment for blasting and impact. However, most of dynamic sensors are expensive so that it needs to be protected by external housing structures or damping devices. In this study, the calibration method for dynamic shock sensor under the distortion by external structures. Hopkinson pressure bar system was adopted to measure the input acceleration to the sensor, and it was compared to the acceleration measured by accelerometer with customized damping device. Consequently, it is conclued that this method can be useful to calibrate the dynamic shock sensor under the linear distortion.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2002.05a
• /
• pp.165-168
• /
• 2002

In most shipyards, the measurement of 3-dimensional relative position of pipes should be connected in the block depends on the manual operation. It results a very tedious and inefficient procedure, thus the proper measurement system is needed to improve productivity and accuracy. This paper describes the development results of pipe measurement system including system concepts, measuring procedures, system calibration, and its accuracy and productivity. And also, the possibility and things to be improved for application in shipyard are discussed in this paper.

• Journal of the Korean Society for Precision Engineering
• /
• v.16 no.2 s.95
• /
• pp.176-182
• /
• 1999

This paper presents a new autonomous kinematic calibration technique by using a laser-vision sensor called "Perceptron TriCam Contour". Because the sensor measures by capturing the image of a projected laser line on the surface of the object, we set up a long, straight line of a very fine string inside the robot workspace, and then allow the sensor mounted on a robot to measure the point intersection of the line of string and the projected laser line. The point data collected by changing robot configuration and sensor measuring are constrained to on a single straght line such that the closed-loop calibration method can be applied. The obtained calibration method is simple and accurate and also suitable for on-site calibration in an industrial environment. The method is implemented using Hyundai VORG-35 for its effectiveness.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2013.05a
• /
• pp.771-772
• /
• 2013

• Journal of the Korean Institute of Gas
• /
• v.24 no.2
• /
• pp.44-49
• /
• 2020

In this paper, a measuring circuit is designed through analyzing manufacture specification of the sensor based on MOS. And the best input-output polynomial are induced that really gas sensors are used in gas safety management industrial fields. Response characteristics of a MOS gas sensor is analysed by through sensor's output voltages are measured after standard gases with six kinds of concentrations are manufactured and are injected to the sensor. A lookup table is created by relations of sensor's output voltages by injecting gases with other concentrations. Because data of the formed lookup table are equal interval, a polynomial can be induced of method of approximation function. So the 5th polynomial of input-output for a sensor is defined, coefficients are calculated by using least squares method, and the 5th polynomial is completed for representing characteristics of the sensor. If the proposed polynomial is applied to gas leak detectors, an inverse transformation of polynomial and programing of array codes are recreated. In this research, polynomial is implemented with array types that intervals of values of a lookup table are one-fifth sampled and interpolated. The performance of proposed 5th calibration equation is verified that errors are reduced than a linear expression when tests are performed by measurement of concentrations against injection of standard gases.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.11 no.1
• /
• pp.41-55
• /
• 2003

A calibration jet system using separate blower is developed to calibrate a flow sensor effectively. Designed open circuit type mini calibration jet system, which has the dimension of $0.5m(W){\times}1.17m(H)$ is small compared with conventional calibration jet systems. The exit of nozzle has exchangeable contractions with a cross section area of $38.5cm^2$ , and a cross section area of $113.1cm^2$, respectively. The ranges of wind speed at exit of exchangeable nozzles are $7.5{\sim}42\;m/s$ and $1.8{\sim}16.5\;m/s$, respectively. The input power for the high pressure blower is 1.18kW. The turning vanes for corner was rolled flat plate parallel to the flow direction. The flow conditioning screen was located immediately downstream of the wide-angle diffuser. The honeycomb and two flow conditioning screens were located in the stagnation chamber. From the economical point of view and the simplicity of the calibration jet system set up and handling, it can be said that the developed calibration jet system is an effective calibration jet system. This system can also be used to calibrate the flow sensor with high resolution.

• Journal of Industrial Technology
• /
• v.22 no.A
• /
• pp.67-72
• /
• 2002

A technique for alignment to true north is presented, based on synchronized measurements of vision image by a camera and output voltage of wind direction sensor. The true wind direction is evaluated by means of image processing techniques with least square sense, and then evaluated true value is compared with measured output voltage of the sensor. The proposed technique is applied to real meteorological tower m Daekwanryung test site. In addition, some uncertainty analysis of this method is presented.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2002.11a
• /
• pp.269-274
• /
• 2002

최근에 TV의 축구, 야구와 같은 스포츠 중계 방송에서 팀의 로고나 점수, 거리와 같은 그래픽 정보를 운동장에 합성시켜 보여주는 새로운 기술이 사용되고 있다. 이는 증강현실(AR: Augmented Reality)의 한 분야인 실시간 이미징 합성 기법을 사용한 것으로서 일반적으로 가상이미징 시스템이라 불리운다. 본 논문에서는 방송용 카메라의 렌즈와 팬(pan), 틸트(tilt) 축에 센서를 부착하여 이를 해석함으로써, 실시간으로 3차원 그래픽 좌표계의 가상 카메라를 제어하는 센서기반 가상이미징 시스템의 구현 결과와 관련기술을 소개한다. KBS 기술연구소에서는 실시간 가상이미징 시스템을 개발하여 'VIVA(Virtual Imaging & Virtual Advertising)'라 이름지었다. 이 시스템은 렌즈 데이터에 근거하여 카메라 캘리브레이션을 수행하며, 주밍(zooming)시 발생하는 카메라의 시점(view point) 변화를 반영하여 원거리 촬영이 이루어지는 스포츠 중계뿐만 아니라 보다 정확성이 요구되는 스튜디오 내의 근거리 프로그램 제작에도 사용이 가능하다. 합성되는 그래픽은 실세계와 같은 완전한 3차원 좌표 공간에 놓이게 되며, 월드 좌표계와 카메라 좌표계를 이용하여 사전 제작된 오브젝트들을 원하는 곳에 위치시킬 수 있다. 실사와 그래픽의 효과적인 합성을 위하여 오버레이(overlay) 모드는 물론 알파키(alphakey)와 크로마키(chromakey)를 조합한 모드를 사용하였다. VIVA는 2002년 부산 아시안 게임에서 수영과 양궁 중계에 활용하였다.

• Journal of the Korean Society for Precision Engineering
• /
• v.12 no.8
• /
• pp.73-85
• /
• 1995

The sensor system to measure the distance precisely from the center of the sensor system to the obstacle is needed to recognize the surrounding environments, and the sensor system is to be calibrated thoroughly to get the range information exactly. This study covers the calibration of the active range sensor which consists of camera and laser slit emitting device, and provides the equations to get the 3D range data. This can be possible by obtaining the extrinsic parameters of laser slit emitting device through image processing the slits measured during the constant distance intervals and the intrinsic parameters from the calibration of camera. The 3D range data equation derived from the simple geometric assumptions is proved to be applicable to the general cases using the calibration parameters. Also the exact 3D range data were obtained to the object from the real experiment.