• Journal of the Society of Disaster Information
• /
• v.16 no.1
• /
• pp.10-20
• /
• 2020

Purpose: Analyze the results of on-site inspection of the tunnel structure maintenance management monitoring and suggest improvement plans. Method: We investigate and analyze the problems of various items on maintenance monitoring of tunnel structure of 14 subway lines of Seoul subway in downtown area. Result: The maintenance monitoring items, measurement quantity and installation location are classified into open tunnel and excavation tunnel and improvement plans are suggested respectively. Various durability criteria of the measuring instruments were examined, and durability confirmation method suggested improvement measures such as approval, inspection, inspection and testing, calibration of monitoring sensors. Conclusion: Applying the improvement measures of the tunnel structure maintenance monitoring to the construction site will increase the efficiency of the maintenance monitoring and contribute to the development of construction monitoring technology.

• Korean Journal of Remote Sensing
• /
• v.27 no.4
• /
• pp.403-410
• /
• 2011

Consistent observation with high temporal and spatial resolution is required for an efficient monitoring of coastal environments. Remote monitoring system installed on the ground is capable of simultaneous observation of wide coastal area and consistent observation with high frequency, which a small number of in-situ measurements cannot manage. This paper studies two typical ground based coastal monitoring system, marine radar and camera system. Marine radar can produce time series of frequency spectrum by integrating wave number spectrum calculated from spatial and temporal variation of waves in the radar image. The time averaged radar images of waves can analyze wave breaking zone, rip currents and location of littoral bars. Camera system can observe temporal variation of foam generation originated from coastal contamination as well as shoreline changes. By extracting the part of foams from rectified images, quantitative analysis of temporal foam variation can be done. By using the two above systems of different characteristics, synergetic benefit can be achieved.

• International Journal of Highway Engineering
• /
• v.19 no.2
• /
• pp.17-24
• /
• 2017

PURPOSES : This study aims to develop a sealant for use in the installation of Weigh-In-Motion (WIM) sensor for asphalt concrete or cement concrete pavements. METHODS : In order to investigate the properties of various sealants that were mixed with latex and carbon fiber, various test methods were adopted, such as bituminous bond strength test, softening point test, and cone penetration test. To evaluate moisture susceptibility, the BBS test was conducted under moist condition. The bond strength ratio (BSR) was calculated based on tensile strength ratio method. RESULTS : The sealant's properties significantly varied according to the amount of latex or carbon fiber. The usage of latex marginally enhanced the cone penetration test result, notwithstanding reduced asphalt content. This implies that the sealant will be proper cold temperature reason. Moreover, the addition of latex and carbon fiber evidently increased the softening point. This indicates that the tendency of the material to flow at elevated temperatures is encountered during service. With the addition of latex and carbon fiber, the moisture susceptibility measured with BSR improved marginally, while the bond strength under dry condition decreased marginally. Sealant F displays the highest bond strength and BSR under limited test conditions. CONCLUSIONS : According to the proportion of latex and carbon fiber mixed, properties of sealant, such as softening point, cone penetration, and BSR varied marginally. This indicates that the sealant has to be applied considering the environmental condition, to improve service life.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2007.05a
• /
• pp.2029-2033
• /
• 2007

오늘날 특정 유역에서의 수문현상 및 수문순환에 대한 분석을 위한 연구가 활발히 진행되고 있다. 이를 위해서는 수문자료의 관측은 반드시 수반되어야 하며, 관측자료의 품질관리 및 원시자료의 관리 등이 요구되고 있는 실정이다. 관측된 수문자료의 품질관리라 함은 자료의 신뢰도 분석과 자료의 보완의 두 과정을 포함한다. 여기서, 신뢰도 분석이라 함은 자료 속에 포함된 불확실성을 판별하는 작업을 의미하며, 자료의 불확실성은 위에서 언급된 자료의 불충분 및 불안정을 제외한 부정확, 불일관성에서 비롯된다. 자료의 보완이라 함은 자료의 신뢰도 분석을 통하여 자료 속에 포함된 불확실한 성분들을 찾아내고, 이를 제거한 후 완전한 자료로 대체하고, 자료가 결측된 경우 공백을 연결함으로써 자료의 완전성을 유지하거나 또는 불충분한 자료를 확장하는 일련의 보완작업이라고 정의한다. 자료의 품질을 결정하는 주요 인자는 크게 관측소 관리의 하드웨어적인 측면과 자료 분석의 소프트웨어적인 측면이 있다. 하드웨어적인 측면에서의 수문자료 품질관리를 위해서 본 과제에서는 현장에 설치된 수위계, 강우량계의 센서 등에 대한 장비를 점검하고, 현장실측을 통해 지속적으로 측정값을 보정해주는 역할을 수행하고 있으며, 소프트웨어적인 측면에서 수문자료의 품질관리를 위해서는 수문자료의 수집 단계부터 시작하여 데이터베이스 저장, 필터링, 통계분석, 웹 및 C/S(Client Server)를 통한 배포 등의 일련의 자료 처리 과정을 수행할 수 있는 수문자료관리 프로그램을 웹 시스템과 C/S로 분류하여 정의내릴 수 있다. 본 연구에서는 수문자료의 관리자 입장에서의 보다 효율적이고 체계적으로 자료를 관리하고 분석하기 위한 방안으로 수문자료관리시스템(Hydrologic Data Aquisition and Management System, HDAMS)을 개발하였다. 이 시스템은 안양천 유역에서 시범 적용하고 있으며, 범용성을 전제로 개발되었다. 또한 수문자료 관리 프로그램의 DB 구조 및 DB 자료를 활용한 다양한 분석기능은 갖도록 설계하였으며 계획된 데이터베이스 구조를 바탕으로 계측기 인터페이스와 사용자 인터페이스, 데이터베이스 간의 연동이 원활히 이루어지도록 개발하고자 한다.

• Journal of Energy Engineering
• /
• v.20 no.4
• /
• pp.292-297
• /
• 2011

Gas pipeline safety management and risk prediction are recognized as a very important issue. And the effort to prevent accidents is essential. So, in this study, it was studied through correlation of pressure changes for leak point detection in real-time. It experimented by installing the five leakage valves in the pipe of 378 m and compared the actual leak points with simulation results. The results showed that experimental leak points and the actual leak points have differences within the 6 m. And this technology has to be commercialized by the demonstration in dangerous zone.

• Journal of Energy Engineering
• /
• v.20 no.4
• /
• pp.353-357
• /
• 2011

An embedded two-axis solar tracking system was developed by using AVR micro controller for enhancing solar energy utilization. The system consists of an Atmega128 micro controller, two step motors, two step drive modules, CdS sensors, GPS module and other accessories needed for functional stability. This system is controlled by both an astronomical method and an optical method. Initial operation is performed by the result from the astronomical method, which is followed by the fine controlled operation using the signals from Cds sensors. The GPS sensor generates UTC, longitude and latitude data where the solar tracker is installed. A database of solar altitude, azimuth, and sunrise and sunset times is provided by UART (Universal Asynchronous Receiver/Transmitter).

• Journal of Internet Computing and Services
• /
• v.17 no.3
• /
• pp.11-18
• /
• 2016

Accessing unauthorized rogue APs in WiFi environments is a very dangerous behavior which may lead WiFi users to be exposed to the various cyber attacks such as sniffing, phishing, and pharming attacks. Therefore, prompt and precise detection of rogue APs and properly alarming to the corresponding users has become one of most essential requirements for the WiFi security. This paper proposes a new rogue AP detection method which is mainly using the installation information of authorized APs and the DHCP snooping information of the corresponding switches. The proposed method detects rogue APs promptly and precisely, and notify in realtime to the corresponding users. Since the proposed method is simple and does not require any special devices, it is very cost-effective comparing to the wireless intrusion prevention systems which are normally based on a number of detection sensors and servers. And it is highly precise and prompt in rogue AP detection and flexible in deployment comparing to the existing rogue AP detection methods based on the timing information, location information, and white list information.

• Journal of Korean Society for Geospatial Information Science
• /
• v.17 no.4
• /
• pp.95-103
• /
• 2009

Global interests for construction of 3 dimensional spatial information has risen due to development of measurement sensors and data processing technologies. In spite of criticism for the violation of personal privacy, CCTV cameras equipped in outdoor public space of urban area are used as a fundamental sensor for traffic management, crime prevention or hazard monitoring. For safety guarantee in urban environment and disaster prevention, a surveillance system integrating pre-constructed 3 dimensional spatial information with CCTV data or video sequence is needed for monitoring and observing emergent situation interactively in real time. In this study, we proposed applicability of the prototype system for web visualization based on X3D, an international standard of real time web visualization, by integrating 3 dimensional spatial information with video sequence.

• Journal of the Korea Society of Computer and Information
• /
• v.25 no.5
• /
• pp.127-135
• /
• 2020

In this paper, we propose an IoT-enabled solution for tour photography services with small-size investment and resources in the travel and tourism industries, being able to impact on economic, social, and cultural values. An IoT-enabled camera is developed based on an open hardware and software platform complying with oneM2M, which can make traditional embedded systems oneM2M-compliant devices due to a middleware solution called TAS (thing adaptation software). IoT cameras deployed around photo zones in a tour site could be remotely controlled via an IoT gateway with a Web-based application on a smartphone. Users would perform a pan and tilt camera control if they want and then take and download a perfect photo picture (even though they are away from the tour site). We expect that the proposed solution will promote the deployment IoT-enabled technologies in tour and travel industries which are important parts of the tertiary sector.

• Journal of the Korea Society for Simulation
• /
• v.17 no.4
• /
• pp.153-158
• /
• 2008

The technology of Software Defined Radio (SDR) is a possible solution to interwork flexibly between various wireless transport protocols. Ubiquitous network, like u-health service network, includes sensor devices or nodes which do not facilitate all the same transport protocols to access network. As such this may be in such unreachable situations as poverty of all required AP (Access Point)’s, faults or contention in a path of particular protocol communication, etc. This paper presents research results of modeling and simulation to analyze transport performance of multi-protocol ubiquitous network which includes SDR-based interwork nodes and congestion-controlled AP’s. Focusing mainly on dynamics of overall transport performance rather than protocol execution procedures, this paper employs the Zeigler’s DEVS (Discrete Event Systems Specification) methodology and DEVSim++simulation environment to experiment.