• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.47 no.12
• /
• pp.39-44
• /
• 2010

In LTE-Advanced systems, every sector uses the entire range of the frequency resource, and when the UEs are located at a cell edge, user throughputs degrade due to the interferences from the adjacent cells. In this paper, we propose a combined scheme for inter-cell interference avoidance and power control. In the proposed algorithm, the sectors consist of the right edge, the left edge and the center for resource allocation and we control the transmission power to improve the user throughputs at the edge of each cell. Using a system level simulation, we analyze low 5th percentile and average user throughputs of the UEs who are located the cell, center and edge when the inter-cell interference avoidance and the power control are combined.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37 no.8B
• /
• pp.687-694
• /
• 2012

In OFDMA-based cellular system, inter-cell interference (ICI) reduces system capacity by aggravating receiving performance of the users located in edge of the cell. Therefore, to mitigate ICI is very important issue in cellular system. To deal with ICI problem, fractional frequency reuse (FFR) is introduced. FFR is an interference management technique. It separates each cell into inner cell and outer cell. Then, it allocates whole system bandwidth to inner cell and different frequency partition to each sector of outer cell. By doing this, outer cell users can ignore interferences from adjacent cells. So, the receiving performance of the cell edge users can be fairly increased. However, using FFR technique has a fatal side effect. In order to use different frequency partition among three sectors of outer cell, they can use only a third of the whole system bandwidth. Then, the reduction of available bandwidth reduces the system throughput directly. To solve this problem, we propose a new FFR method that allocates partially overlapped frequency partition to each sector of outer cell. And then, we suggest a proper overlapping ratio for practical cellular system.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.12 no.7
• /
• pp.1037-1047
• /
• 2001

In this paper, the capacity for the reverse link of the imperfect power controlled DS/CDMA hierarchical cellular system is analyzed considering imperfect sectorization in shadowing environment. Unlike the theoretical assumption, the power control of the DS/CDMA hierarchical cellular system is not perfect. Therefore, we consider various parameters such as the imperfect power control, the imperfect sectorization, the processing gain and the number of microcell interferers, which cause the capacity variation of the DS/CDMA hierarchical cellular system. It is shown that the capacity of DS/CDMA hierarchical cellular system is decreased according to the increase of the deviation of the imperfect power control, the overlapped angle, the power ratio between macrocell and microcell and to the decrease of processing gain, the number of microcell interfering users. Also, it is observed that the hierarchical cellular system can increase the user capacity from 1.54 to 3.89 times compared to the homogeneous macro-cellular system.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.8A
• /
• pp.829-837
• /
• 2008

A cellular system with fixed relays is considered to be a technology that can support high data transmission service to wide areas. However, either inter-cell interference or inter-sector interference that can be produced by adding relays to the cellular system with fixed relays does not guarantee high link performance to deteriorate function, so that resource allocation for avoidance of interference is very much important. In the paper, the cellular system performance with repeater relay has been compared with the cellular system performance with relay, and cell coverage expansion at the use of relay repeater has been compared. To compare, this paper has suggested resource allocation method to avoid inter-cell interference and inter-sector interference at installation of fixed relay on the cellular system. The proposed method can allocate different frequency resources on adjacent base stations and relays to reduce interference and to expand high data transmission area, and all of frequency bands are used at each sector to elevate efficiency of the frequency when base stations and relays operate simultaneously.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.21 no.8
• /
• pp.1492-1497
• /
• 2017

In this paper, a design method for a CPW-fed wideband loop antenna for indoor digital TV applications is studied. The proposed loop antenna consists of a square loop and two circular sectors which connect the loop with central feed points, and the CPW feed line is inserted in the lower circular sector. The CPW feed line is designed to match with the 75 ohm port impedance for DTV applications, and the ground slots are etched in order to improve the impedance matching in the middle frequency region. The effects of the gap between the circular sectors and the location and dimension of the ground slots on the input reflection coefficient and gain characteristics are examined to obtain the optimal design parameters. The optimized antenna is fabricated on FR4 substrate, and the experiment results show that it operates in the frequency band of 463-1,280 MHz for a VSWR < 2, which assures the operation in the DTV band.

• Journal of Advanced Navigation Technology
• /
• v.24 no.6
• /
• pp.581-586
• /
• 2020

In this paper, the design process and method for a compact wideband loop antenna for terrestrial digital TV (DTV) and ultra high definition (UHD) TV applications was proposed. Horizontal slits were added on the two circular sectors of the proposed loop antenna in order to miniaturize the existing wideband loop antenna consisting of a square loop and two circular sectors. A CPW transmission line was inserted in the center of the lower circular sector as a feed line. The CPW feed line was designed using the 75 ohm port impedance for DTV and UHD TV applications, and a tapered center-signal line was designed to improve the impedance matching. The final designed antenna was fabricated on an FR4 substrate with a thickness of 0.8 mm. The experiment results show that the proposed compact loop antenna operates in the frequency band of 444.3-820.1 MHz for a VSWR < 2, which fully covers the DTV and UHD TV bands.

• 한국방재학회:학술대회논문집
• /
• 2011.02a
• /
• pp.101-101
• /
• 2011

현재 국내에서 시행되고 있는 '4대강 살리기 사업'은 하천에서 발생하는 홍수 및 가뭄재해방지를 위한 다양한 공학적 노력을 시도하고 있다. 특히 안정적인 수위 및 유량확보와 홍수방지를 위한 보(weir)가 4대강 유역에 16개 설치되고 있다. 이러한 보 구간에는 고정보와 가동보가 복합적으로 설치되고 있으며 가동보는 그 형상과 운영방식에 따라 다양한 설계방안이 적용되었다. '4대강 살리기 사업' 중 낙동강 23공구의 강정보 공사 구간에는 원호형태의 측면 형상을 갖는 라이징 섹터게이트(Rising sector gate)가 적용되었다. 라이징 섹터게이트는 구조물의 높이가 낮고 수문의 개폐장치가 수문피어 구조물 내에 설치되어 경관이 우수하며, 구조가 간단하여 비체와 수류의 안정성이 뛰어나기 때문에 4개의 공사구간에 적용되었다. 따라서 본 연구에서는 강정보의 가동보 구간 2문 중 1문을 1/100 축척으로 제작하여 가변경사 개수로에 설치하고, 홍수 빈도별 상류 유량 조건과 하류단 수위조건으로 케이스를 정하여 실험을 수행하였다. 본 실험에서 사용한 개수로 장치는 너비 0.6 m, 높이 0.8 m, 그리고 길이 15.0 m(측정가능 구간, 헤드탱크와 테일게이트 부제외)의 개수로 실험장치이다. 측부는 모두 강화유리로 되어 육안관찰 및 계측 시 용이하게 제작되었으며, 순환식 유량 공급장치를 구축하여 수로의 하부에 설치된 유량탱크로부터 계속적으로 순환하도록 설계되었다. 또한 수로 하단으로부터 상단방향으로 약 33 m 지점에 전동 유압식 Jack screw 2기가 설치되어 경사도를 조절할 수 있도록 제작되었다. 유량조절용 판넬의 제어기판에는 디지털 경사계가 설치되어 있기 때문에 보다 정확한 경사도의 조절이 가능하다. 보 모형의 총연장은 53 cm이며 폭은 45 cm이다. 섹터게이트의 게이트부분은 직경 15 cm로 설계하였다. 문주부분을 포함한 모든 모형은 아크릴로 제작하며 레이저의 주사를 방해하지 않으며 투과율을 최대로 할 수 있도록 고강도의 아크릴을 가장 얇게 하여 중공형태를 채택하였다. 실험조건은 우선 보의 운영방안에 따라 게이트의 4가지 개방도를 설정하였고, 특히 평수위조건에서는 보의 상류부에 퇴적된 퇴적물의 세척을 위한 flushing 운영개방도 포함되어 있다. 홍수시에 대한 유량조건은 2년 빈도에 해당하는 유량을 수문의 비율과 상사법칙에 따라 설정하였으며 하류단 수위조건도 동일한 조건에 대한 값을 채택하여 적용하였다. 유동장의 해석을 위해서는 비접촉식 계측방법인 PIV(Particle Image Velocimetry) 시스템을 채택하여 2차원(x-z 방향) laser sheet를 생성하고 주입된 particle에서 반사된 변위(displacement) 정보를 상호상관(cross-correlation)기법으로 유동장을 계산하였다. 또한 수리모형과 동일한 지형격자를 구축하여 3차원 CFD 프로그램인 FLOW-3D로 계산하여 결과를 비교하였다. 특히 flushing 운영방안에 대한 게이트부의 개방도를 세가지(30, 45, $60^{\circ}$)로 구분하여 모의하였고, 적절한 개방도를 제안하고자 하였다. 실험결과는 우선 4가지 운영방안에 대한 가동보 주변에서의 유속장을 파악하였고, 최대유속의 발생위치의 변화를 확인할 수 있었다. 그리고 이에 따른 보의 바닥에서 최대유속이 발생할 경우, 하상보호공 위치와 거리 등에 대해서 분석하였다. 이를 통해 가동보 운영에 따른 다양한 유속구조를 파악할 수 있게 되며 구조적 안정성 확보를 위한 검증자료로 활용될 수 있을 것으로 예상된다. 향후, 가동보 운영방안 중 수세효과(flushing effect)에 대한 효과분석을 위해 게이트부 상류구간에 적절한 입경과 비중의 퇴적물질을 설치하는 연구와 상류부에서의 유입유사농도 및 시간변화에 따른 퇴적에 관한 연구를 수행할 계획이다.

• Journal of Navigation and Port Research
• /
• v.31 no.5 s.121
• /
• pp.421-426
• /
• 2007

Recently, the defect maintenance period of the new construction structure was extended from 5 years to 10 years. And according to change of realization on the quality of construction and maintenance, a development of semi-permanent method of construction is required for maintenance of blind parts of underwater structure, such as bridge, dam, harbor, etc. In this study, we proposed a floating type sector dry caisson, which is effective to the maintenance of submerged large structures. These large structures were being maintained incompletely, partly due to unskilled divers and difficult working condition. Considering the easiness of access to the maintenance area and the cost for set up the working structure, especially for the case of structure slabs close to the sea surface and harrow pile span structures, we developed and introduced a sector dry caisson instead of the full caisson structure. By doing this, it is easy to move out the caisson rapidly in emergence case. Therefore, we expect that the floating sector caisson will contribute to reduce working time and improve the quality of underwater work in future days.

• Journal of Korea Technology Innovation Society
• /
• v.14 no.2
• /
• pp.223-245
• /
• 2011

We have analysed the impact of innovation on the employment in the Korean Service sector using KIS 2006 data. Our study is based on Bogliacino and Pianta (2010)'s model, which involves two main innovation strategies, technological competitiveness and cost competitiveness, as the main explanatory innovation variables for the employment dynamics. Empirical results show that an increase in demand was the strongest driver for an increase in employment in all four service sectors, including Science-based, specialized supplier, size and information intensive, and supplier dominated. Innovation strategy appeared to have a significant effect on employment at the firm level; Technological competitiveness showed a positive effect on employment in science based sector while cost competitiveness appeared to give a negative effect in specialized supplier sector. The firms in size and information intensive sector showed that increase in wages gives negative impact on their employment. However, cost competitiveness did not give any significant effect on employment dynamics of firms in size and information intensive sector and supplier dominated sector. This finding is different from the research of Bogliacino and Pianta (2010) on the European countries. One possible explanation would be that innovation strategy does not affect employment of firms in size and information intensive sector and supplier dominated sector since the level of innovativeness of these sectors in Korea fall behind that of European countries.

• Proceedings of the Korean Information Science Society Conference
• /
• 2010.06a
• /
• pp.271-272
• /
• 2010