• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2004.04a
• /
• pp.27-30
• /
• 2004

오염토양의 pH는 7.47에서 7.97까지의 범위로 약 알카리성이며, 토성은 80% 이상이 0.425 -2 mm 범위에 분포하는 coarse sand의 성질을 가지고 있다. 토양 입도 분석 및 농도 분포의 결과로 볼 때, 입도 2mm 이하의 토양 중 0.85-2.00 mm 범위에 있는 토양이 약 60% 이상의 오염물질을 포함하고 있다. 세척제로 고려된 용액 중 As 용출효율의 결과를 살펴보면, H$_3$PO$_4$ 및 citric acid가 100% 제거율을 보이고 있어 가장 효과적임을 나타내고 있다.

• Proceedings of the Korean Institute of Industrial Safety Conference
• /
• 1998.05a
• /
• pp.185-188
• /
• 1998

인화성액체는 공장가동에 필요한 연료, 생산과정에서 사용되는 세척제$\cdot$용제, 원료 등 거의 모든 화학공업에서 광범위하게 사용되고 있다. 인화성 액체는 소방법에서 제4류로, 산업안전보건법에서는 인화성물질로, 선박안전법에서는 선적액체 위험물 중 인화성액체 물질로 각각 구분되어 제조, 저장, 취급, 운반, 이송시 지정수량과 저장, 취급방법의 규제 등으로 엄격히 관리되고 있는 실정이다. (중략)

• Proceedings of the Membrane Society of Korea Conference
• /
• 1998.04a
• /
• pp.117-119
• /
• 1998

1. 서론 : 본 연구에서는 한외여과막을 이용하여 대형건물에서 발생하는 오수, 동/식물성 오일과 계면활성제를 함유하는 ㅈ 중국식당 배수 및 자동차 세척 배수를 처리하였다. 대형건물 및 식당 배수에서는 한외여과막 투과수를 재사용하기 위하여 추가적인 공정이 요구되나 자동차 세차배수의 경우, 한외여과막으로 오일 성분만을 효과적으로 제거하고 유효성분인 세척제와 세척용수를 재활용할 수 있을 것으로 판단된다.

• Journal of the Korean Society of Groundwater Environment
• /
• v.5 no.1
• /
• pp.30-36
• /
• 1998

For successful soil flushing process selection of appropriate flushing reagents is essential. Futhermore, obtaining operating parameters for site remediation application through various bench-scale tests is also important. In this research a series of organic acids (acetic, citric, oxalic, and succinic acids) were tested for flushing capability. Copper-contaminated natural soil was used as a test medium, and flushing experiments were performed with batch system. All the organic acids used did not provide effective flushing conditions at concentration of 1 mM. At the acid concentration of 50 and 100 mM copper was removed efficiently although 50 and 100 mM did not show any significant differences in removal efficiencies. Citric acid and oxalic acid removed copper more efficiently than the others, and especially, citric acid showed over 87% of removal efficiency of copper at near neutral pH of 5 to 7. Speciation of extracted copper using GEOCHEM simulation showed majority of extracted copper existed as complexed with organic acids and only small portion of organic acids were complexed with copper indicating promising application of soil flushing with organic acid to heavy metal-contaminated site remediation.

• Journal of Conservation Science
• /
• v.28 no.3
• /
• pp.229-233
• /
• 2012

This research was to evaluate conservational stability of cleaning treatment and color recovery by weak acid treatment on ivory. Before this experiment, had an ivory identification such as black light and schreger angle to find whether it is authentic or not. In wet cleaning treatment on ivory, used polar solvents such as distilled water, acetone, ethyl alcohol and acetic acid which usually used for cleaning ivory and bones. After cleaning took a experiment to evaluate conservational stability in surface observation, calculate weight and color difference. Following these results, these polar solvents were stable on the ivory samples. On the other hand, in weak acid treatment, used samples that were exposed by UV-A, UV-B, UV-C for 1 weeks, to restore its color from changed to original color. After treatment, found tiny cracks and exfoliation on the surface. Moreover, the color changed when it is treated by lemon juice, so, it is impossible to adapt.

• Journal of the Korean GEO-environmental Society
• /
• v.3 no.1
• /
• pp.37-45
• /
• 2002

EDTA-enhanced electrokinetic removal of copper and zinc from contaminated sandy soil was carried out. In desorption equilibrium tests, the required mass ratio of EDTA to metal was 10:1 to obtain over 90% of desorption from soil. The removal of heavy metals with chelating agent EDTA below pH 3 was limited because of EDTA precipitation. In electrokinetic experiments, the pH control at anode chamber was essential and 38% Cu and 56% Zn were removed under 30 mA for 1.5 days. Heavy metal removal was greatly improved by controlling anode and soil pH with circulation of anolyte with NaOH solution, in which >50% heavy metal was removed for 4 days and >70% for 9 days.

• Journal of Korea Soil Environment Society
• /
• v.1 no.2
• /
• pp.61-72
• /
• 1996

A series of batch and lab-scale continuous tests were conducted to optimize the design parameters for the full-scale in-situ soil flushing experiments. The cleaning abilities of the surfactant solutions of Tween 80, Triton X-100 and SDS were compared for the soil artificially contaminated by hydrophobic organic contaminants: n-dodecane, naphthalene and anthracene. Tween 80 and Triton X-100 were shown to be efficient for n-dodecane. SDS and Tween 80 were shown to be efficient for naphthalene and anthracene. At the end of each column test, the sorbed amount of surfactant to soil was also measured. Tween 80 was found to be the least adsorbed surfactant to soil. The flushing ability at flowrate of 7 ml/min, was hampered comparing to flowrate of 3 and 5 ml/min. Initial pH of the soil did not significantly affect the flushing efficiencies. Tween 80 was determined as the most harmless surfactant for the Gram(+) and Gram(-) bacteria.

• Membrane Journal
• /
• v.9 no.4
• /
• pp.202-208
• /
• 1999

The car washing effluent containing various oils and detergent was treated by ultrafiltration membranes. Dead-end type stirred cell (Amicon 8050) with 10, 30 and lOOk dalton membranes was used to determine permeation and rejection characteristics for the car washing effluent. In case of low molecular weight cut-off membranes, the effect of membrane fouling was weak under the applied pressures. However, the permeation flux for YM100 membrane(look dalton) may be affected by oil layer formation on the membrane surface as well as oil particle plugging for a part of membrane pores due to compressible and deformable oil properties. Oil and particle rejections in the permeates were over 95%, but detergent was passed easily through the membranes. Hence, the permeates containing detergent can be recycled to the system, and may reduce water pollution. Also, the car washing effluent was treated continuously by a capillary type ultrafiltration membrane of MWCO 50k dalton. The experimental data were fitted suitably to the cake filtration model.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.45 no.11
• /
• pp.1696-1700
• /
• 2016

In this study, acorn pomace extract (APE) was developed as a natural chemical sanitizer and substitute for chlorine-based sanitizers such as sodium hypochlorite containing harmful substances. Antimicrobial activities of APE and its combined treatments with fumaric acid (FA) and mild heat against Listeria monocytogenes inoculated on red chard were examined. Among the treatments, combined treatment of 0.5% APE at $50^{\circ}C$ and 0.5% FA was the most effective, causing reduction of L. monocytogenes populations by 3.36 log CFU/g compared to the control. After combined treatment, populations of aerobic mesophilic bacteria in the red chard decreased by 2.89 log CFU/g during storage at $4^{\circ}C$ for 8 days compared to the control. Regarding color changes in red chard upon combined treatment, there was no significant change among the red chard samples. These results indicate that combined treatment of APE, FA, and mild heat can improve microbial safety of red chard without affecting quality such as color during storage.

• Clean Technology
• /
• v.18 no.4
• /
• pp.390-397
• /
• 2012

Removal characteristics of lead-contaminated soil at the military shooting range located in the Changwon city were studied experimentally using soil washing process. As a washing solution, hydrogen chloride (HCl) concentrations of 0.001, 0.01, 0.1 and 0.2 N were used, and soil : solution ratios were 1 : 2, 1 : 3, 1 : 4, and 1 : 5. Particle diameter of contaminated soil of 4-0.075 mm, and washing period of 5, 10, 15, 20, 30, 60, and 120 min were used as operating parameters. The optimum concentration of HCl solution was 0.1 N (56.3% of Pb removal efficiency) with 15 minutes operation period in views of economics, and the optimum soil : solution ratio was determined as 1 g : 3 mL for 69.7% of Pb removal efficiency with 0.1 N HCl and 15 minutes washing period. As washing period increased, removal efficiency was increased until 20 min of the removal efficiency of 75.3%, and then almost stable. Pb removal efficiency in soil particle diameters of 0.075 mm or more was ranged from 77.0% to 82.0%, but it was decreased to 52.8% in diameter of less than 0.075 mm. Therefore, the optimum cut-off size of the soil particle diameter was found less than 0.075 mm. Combined HCl solution and ultrasonic washing method showed better removal efficiency compared to only water or HCl washing method for particle sizes above 0.075 mm.