• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2010.04a
• /
• pp.23-26
• /
• 2010

본 논문에서는 유니버설 조인트의 동역학적인 해석을 위하여 오일러 각 순서에 의한 방법과 4원수에 의한 방법으로 운동방정식을 유도하였다. 원동축과 종동축의 회전은 물론 세차운동을 하는 회전축을 포함할 때 각 방법의 상이점을 발견하였다. 이러한 시스템의 동역학적 정식화를 바탕으로 한 수치 예제를 통하여 기존의 오일러 각 방법과 제시한 4원수 방법의 해석 결과를 비교하였다.

• Proceedings of the Korean Magnestics Society Conference
• /
• 2003.06a
• /
• pp.168-169
• /
• 2003

최근 세계적 주목을 받고 있는 spin FET 소자는 반도체에 주입된 spin 편향된 전자가 gate voltage(V$_{G}$)에 의해 반도체 계면에 유도된 전기장의 영향을 받아, Spin 세차운동을 하는 mechanism(Rashba 효과)이 근간을 이루고 있다. 작은 band gap을 가지는 반도체(narrow gap 반도체)는 작은 유효질량의 전자에 의해서 이러한 Rashba 효과를 크게 할 수 있어서, spin FET 구현을 위한 강력한 후보이며, 요즘 한창 연구되고 있는 주제이기도 하다. Rashba 효과가 저자기장 영역에서의 weak antilocalization효과로 나타남을 이용하여, 본 논문에서는 metal gate가 형성된 HgCdTe FET를 제작하여(FET1 시료, Fig. 1(a)참조), V$_{G}$에 따른 weak localization(WL) 및 weak antilocalization(WAL) 효과를 얻었다. 또한, Rashba 효과에 의한 spin 세차운동을 측정할 수 있는 소자(FET3 시료, Fig.1(b) 참조)를 제작하여 spin FET 구조에 대하여 연구하였다.

• Journal of the Korean Magnetics Society
• /
• v.21 no.6
• /
• pp.204-207
• /
• 2011

We developed a time-resolved magneto-optical Kerr effect microscope system to investigate ultrafast magnetization dynamics. Based on the pump-probe method, 0.1-ps time resolution was achieved by use of a fs Ti:Sapphire laser. The magnetization dynamics was then measured on Pt/Co/Pt thin films with various Co thicknesses. All the samples exhibited ultrafast demagnetization within a few ps by direct heating of pump laser. Some thicker samples showed precessional motion of magnetization, from which the Gilbert damping constant was determined based on the Landau-Lifshitz-Gilbert equation.

• Proceedings of the Korean Magnestics Society Conference
• /
• 2007.12a
• /
• pp.58-59
• /
• 2007

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.23 no.2
• /
• pp.183-189
• /
• 2010

This paper deals with the comparison of analysis methodologies by applying both Euler angle and quaternion to observe the kinematical behavior of the universal joint system used as an automotive drive-shaft. At first, conventional approaches are applied to predict a kinematical behavior by introducing only Euler angles into the universal joint system, but turns out to be lack in consistency and reliability of the analysis. Then to overcome this deficiency in numerical analysis a different methodology is proposed by using quaternion in this system. Its corresponding advantage is discussed in terms of kinetic energy, rotational velocity and rotational displacement. The application of quaternions in the numerical experiment is shown to be a more useful and valid way of establishing the ideal analytical model of the universal joint system.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2007.11a
• /
• pp.159-162
• /
• 2007

뉴테이션(Nutation, 장동)은 자이로스코프와 같은 큰 축 대칭 물체의 회전축에 대해 작은 불규칙적인(어원적으로 "nodding") 운동이다. 위성체가 회전상태에 돌입하게 될 때 위성체가 순수한 회전 운동이 아닌 뉴테이션 운동을 일으킬 경우, 이를 제거하기 위하여 뉴테이션댐퍼(NutationDamper)를 사용한다. 유도탄에 들어가는 부품 중에서 자이로조립체 내에 들어 있는 뉴테이션댐퍼의 개발을 하고자 본 연구를 수행 하게 되었으며, 자이로조립체 내에서 뉴테이션댐퍼의 역할은 자이로조립체의 원주상에 환형 튜브 형상으로 장착되어 자이로조립체가 세차운동(Precession)을 할 때 부가적으로 수반되는 바람직하지 못한 떨림(Wobble motion)인 뉴테이션을 감쇠시키는 기능을 수행한다.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2009.04a
• /
• pp.417-420
• /
• 2009

본 논문에서는 유니버설 조인트의 기구학적인 해석을 위하여 원동축이 평면 내에 존재할 경우와 그렇지 않은 경우에 대하여 종동축의 속도를 관찰하였다. 평면 내의 경우는 기존 이론값과 동일하나 평면 외의 경우는 유한회전의 순서에 따라서 독립적인 결과값을 가지게 된다. 이는 오일러 각의 순서를 달리하면 표현되는 속도가 다르기 때문이며 이러한 단점을 극복하기 위하여 원동축에 4원법을 적용하였다. 수치 예제를 통하여 기존의 방법과 제시한 방법을 비교하여 제시한 방법이 일관성 있는 결과를 제공함을 확인하였다.

• Geophysics and Geophysical Exploration
• /
• v.26 no.4
• /
• pp.238-267
• /
• 2023

Studies on Earth's rotation and tide since the 19th century are briefly summarized. The theories of precession, nutation, polar motion, and periodic/secular changes in the rate of rotation are described individually. In addition, a brief review of the Milankovitch theory - the hypothesis of the relationship between the Earth's spin/orbital rotational state and the ice ages - is given. Finally, Earth's tides and their theoretical models are briefly explained. Some detailed technical content is summarized in the appendices.

• The Journal of the Petrological Society of Korea
• /
• v.7 no.1
• /
• pp.37-52
• /
• 1998

The granites in the Jeomchon area can be divided into hornblende biotite granite (Hbgr), deformed biotite granite (Dbgr), deformed pinkish biotite granite(Dpbgr), biotite granite (Btgr), and granite porphyry(Gp). These granites show metaluminous, 1-type and calc-alkaine characteristics from their whole-rock chemistry. Hbgr and Dbgr belong to ilmenite-series granitoids, but Gp to magnetite-series. Dpbgr and Btgr show the intermediate nature between ilmenite- and magnetite-series. Tectonic discriminations indicate that Hbgr and Dbgr were formed in active continental margin environment, whereas Dpbgr, Btgr, and Gp in post-orogenic and/or anorogenic rift-related environment. From the Harker diagrams major oxide contents of Hbgr and Dbgr show a continuous variation with $SiO_2$, indicating that they are genetically correlated with each other. On the other hand, any correlation of major oxides variation cannot be recognized among Dpbgr, Btgr and Gp. It seems like that Hbgr and Dbgr were derived from a same parent granitic magma, judging from their occurrence of outcrop, mineral composition as well as whole-rock chemistry. Variation trends of major oxide contents between Hbgr and Baegnok granodiorite are very similar and continuous. If the two granites were derived from a cogenetic magma, there exists a possibility that the granitic bodies had been separated by Btgr and Gp of Cretaceous age. Three stages of the granitic intrusions are understood in the Jeomchon area. After the intrusion of Hbgr and Dbgr during middle to late Paleozoic time, Dpbgr emplaced into the area next, and finally Btgr and Gp intruded during Cretaceous time. Tectonic movement accompanying shear and/or thrust deformation seems likely to have occurred bewteen the intrusions of Dpbgr and Btgr.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.31 no.1
• /
• pp.49-57
• /
• 2003

The flight trajectory of a boomerang is predicted with the momentum theory (actuating disk theory) and the blade element method generally used as tools to analyze in the rotary-wing aerodynamics. Boomerangs made by students are actually compared with the computational results, utilized to get the physical intuition. The transition from helicopter mode to autogyro mode with the gyroscopic precession is observed in numerical analysis and experiment like a 'flying rotor' after the boomerang taking off. The whole system is shown to be highly nonlinear and very sensitive to the initial conditions. Various flight loci may be obtained if we change the parameters.