• Korean Journal of Breeding Science
• /
• v.42 no.3
• /
• pp.298-301
• /
• 2010

A new intermediate parent 'Wonye 30002' (Allium cepa L.) was developed by Bioenergy Crop Research Center, NICS in 2009. As a male sterile line, 'Wonye 30002' can be used to hybrid seed production by crossing with pollen parent. The first cross was conducted between male sterile plants of 402AC203 and M1 in 2002. The male sterile line 'Wonye 30002' has circular bulb and bulb weight is 283 g. As early maturing type, lodging date is May 6. Plant height and pseudostem diameter are 43 cm and 15.5 mm, respectively. In seed harvesting characteristics, number of flower stalks and the length are 43 cm and 110 cm, respectively. The flowering date of 'Wonye 30002' is around May 24 and is completely male sterile. 'Wonye 30002' is a promising male sterile line for hybrid bulb onion seed production.

• Applied Chemistry for Engineering
• /
• v.29 no.6
• /
• pp.753-758
• /
• 2018

Surface activities including CMC, surface tension, foaming power etc. of the rhamnolipid (RL), a biosurfactant fermented by microorganism were investigated. Both the RL and liquid detergent contained RL showed a good surface activity. For the detergency test, the liquid detergent with RL showed a slightly better performance than that of using an fatty acid. However for the foaming profile, the liquid detergent with RL exhibited a lot of foam volume and the suppression of the rinsing and foaming during rinsing cycles with the RL was not seen. Therefore it can be concluded that RL can be used as a main surfactant or co-surfactant in liquid detergents without functions of foaming suppression or rinse-aid.

• Journal of the Microelectronics and Packaging Society
• /
• v.28 no.2
• /
• pp.45-50
• /
• 2021

As the difficulty of flip chip products increases, there is a growing interest in the material of flux, which is safe from the solder wetting and reliability. In the case of no clean flux, there is merit in terms of process efficiency because there is no cleaning process. But Cu migration and delamination can be occurred if the residue remains after the reflow process. In this study, major element materials, solvent and activator, are changed and confirmed effect of non-wet and reliability in the package environment. Stability of materials were secured through storage stability evaluation, and we found out non-wet zero materials through the application of two types of solvent and activator with different boiling point and the increase of activator content. After reliability test, no delamination was found in the plane analysis, which secured the final composition of low residue flux.

• Clean Technology
• /
• v.15 no.4
• /
• pp.287-294
• /
• 2009

In order to separate the fuel-grade DME from the product of a direct DME synthesise reaction, containing 19~20% of DME, an absorption column and a purification column were employed. In the DME absorption column, the flow rate of the methanol required to recover more than 99% of DME at 50 bar was estimated by the correlation obtained from the lab-scale experiments. In the DME purification column, the maximum DME recovery of 98.2% could be obtained even from the side stream at the 3rd stage above the feed stage, since the feed stream originated from the product of the absorption column had already contained a large amount of DME (20~30 mol%) and only a small amount of light products such as $CO_2$ and $N_2$ (5~10 mol%).

• Clean Technology
• /
• v.15 no.2
• /
• pp.69-74
• /
• 2009

A high-dose ion-implanted photoresist (HDIPR) was stripped off from the surface of a semiconductor wafer by using a mixture of supercritical carbon dioxide and a co-solvent. The additional ultrasonication improved the stripping efficiency remarkably and thus reduced the stripping time by supplying physical force to the substrate. We investigated the effect of co-solvents, co-solvent concentration, and stripping temperature and pressure on the stripping efficiency. The wafer surfaces before and after stripping were analyzed by scanning electron microscopy and by an energy dispersive X-ray spectrometer. The HDIPR could be stripped off completely in 3 min with 10%(w/w) acetone/sc$C0_2$ mixture at 27.6 MPa and 343 K.

• The Journal of the Korea Contents Association
• /
• v.22 no.5
• /
• pp.435-445
• /
• 2022

The purpose of this study is to identify the factors affecting the mental health of allergic rhinitis patients and to present basic data on policy preparation to improve the mental health of the study subjects. As for the analysis data, data from the National Health and Nutrition Survey of the Korea Centers for Disease Control and Prevention were used, and 881 adult and allergic rhinitis patients were used for the final analysis. Frequency analysis, cross-analysis, and logistic regression analysis were performed using SPSS 26. As a result of the study, the lower the age, the higher the level of education, the more pain/uncomfortable, the more anxious/depressed, and the lower the level of subjective health awareness, the less walking for a week. As a factor influencing depression, the more medical benefits, the more disturbed daily activities, and the more anxious/depressed there were. In order to improve the mental health of allergic rhinitis patients, if we seek ways to manage and solve factors that commonly affect stress and depression, we can efficiently expect the improvement of the subject's mental health status.

• Proceedings of the Korean System Dynamics Society
• /
• 2003.08a
• /
• pp.83-108
• /
• 2003

한 산업에서 인력 수급을 전망하는 것은 인력의 수요자인 기업의 측면에서는 안정적인 인력 확보 전략을 수립하기 위해서, 공급자인 산업 종사자들에게 있어서는 자신들이 앞으로 진출해야할 산업의 매력도를 파악하기 위해서, 그리고 정부 차원에서는 관련 산업에 있어서 중복 투자의 방지와 효율적이고 균형 된 산업 발전을 위한 정책 수립을 위해서 매우 중요하다. 그러나 이러한 인력 수급 전망들은 종종 잘못된 시장 분석으로 인하여 인력의 과소 공급 또는 과잉 공급이라는 의도하지 않은 결과를 가져오는 경우가 있다. 이는 전체적인 시각에서 시장의 구조적 특성을 분석하기보다는 현상을 조사하는 수준에 머물거나 현재의 상황 또는 단일 산업만을 고려할 뿐 시간의 흐름에 따른 동태적 변화와 지연된 피드백의 효과, 그리고 관련 산업간의 유기적 연관관계를 반영하지 못한 채 단기적이고 단선적인 관점에서 인력 수급을 전망하는데 그 원인이 있다고 볼 수 있다. 특히, 다른 산업과의 연관 관계가 복잡하고 인력의 수요의 급증에도 불구하고 산업에서 요구하는 인력을 양성하기까지 많은 시간이 소요되는 첨단 산업 및 신생 산업에서의 경우 이러한 현상은 더욱 두드러지게 나타날 수 있다. 이러한 관점에서 본 논문은 변수간의 상호 동태적인 관계와 시간의 흐름에 따른 행태를 분석하는 데 용이한 SD 방법론에 기초하여 최근 빠르게 성장하고 있는 정보보호산업에서의 동태적인 인력 수급 모델을 구현하여 향후 국내 정보 보호 인력의 수급 행태가 어떻게 전개될 것인지를 분석해 보았으며 이를 통하여 동태적 시각에서 인력 수급 불균형 현상의 원인을 파악하고 문제 해결을 위한 대안을 제시하고자 한다.채취하여 임신진단키트(제네디아프로테 트, 녹십자)를 이용하여 임신여부를 1차적으로 확인하였다. 과배란을 유기한 13두의 공란우중 9두(69.2%)가 과배란 반응을 나타내었으며, 회수된 수정란 51개중 이식가능수정란은 38개(74.5%) 였다. 발정동기화를 유도한 수란우 40두중에서 35두(87.5%)가 발정이 동기화되었으며, 그 중 황체검사를 통하여 30두의 수란우에 수정란을 이식하였다. 수정란이식후 13일(발정주기 21일)에 혈액을 이용한 임신진단에서 농가별 수태율은 각각 37.5%, 70.0%, 60.0% 및 71.4% 로서 평균 60.0%를 나타내었다.서 39$^{\circ}C$, 5% $CO_2$ 배양기에 48시간 배양하면서 생존여부를 판단하였다. 실험 2에서 확장배반포배 수정란이 25.3%의 생존율을 나타내었으며, 실험 1과 실험 3에서는 수정란의 형태와 관계없이 생존성을 확인할 수 없었다. 이상의 결과로 보아 glycerol 완만동결에서는 확장배반포기 수정란 이상이 보존가능한 것으로 추정되나 더 추가적인 연구가 요구된다.c kinase 활성의 변동은 정소 내 간충조직, 세정관 상피의 증식 및 기능적 분화 과정을 매개하는 생리적 활성분자 수용체 하위의 신호전달 과정에 Src-Csk loop에 의한 조절가능성을 확인할 수 있었다.rugrene의 향기성분이 주요 성분군으로 확인되었다. 2. 생강나무에서 생강의 향기를 발산하는 성분으로는 $\beta$-myrcene, o-terpinolene, phellandrone, ι-limonene, $\beta$-eudes

• Journal of Korean Society of Environmental Engineers
• /
• v.30 no.9
• /
• pp.948-954
• /
• 2008

Membrane bioreactor(MBR) processes have been widely applied to wastewater treatment for last decades due to its excellent capability of solid-liquid separation. However, membrane fouling was considered as a limiting factor in wide application of the MBR process. Excess aeration into membrane surface is a common way to control membrane fouling in most MBR. However, the excessively supplied air is easily dissipated in the reactor, which results in consuming energy and thus, it should be modified for effective control of membrane fouling. In this study, cylindrical tube was introduced to MBR in order to use the supplied air effectively. Membrane fibers were immersed into the cylindrical tube. This makes the supplied air non-dissipated in the reactor so that membrane fouling could be controlled economically. Two different air supplying method was employed and compared each other; nozzle and porous diffuser which were located just beneath the membrane module. Transmembrane pressure(TMP) was monitored as a function of airflow rate, flux, and ratio of the tube area and cross-sectioned area of membrane fibers(A$_m$/A$_t$). Flow rate of air and liquid was regulated to obtain slug flow in the cylindrical tube. With the same flow of air supply, nozzle was more effective for controlling membrane fouling than porous diffuser. Accumulation of sludge was observed in the tube with the nozzle, if the air was not suppled sufficiently. Reduction of membrane fouling was dependent upon the ratio, A$_m$/A$_t$. For diffuser, membrane fouling was minimized when A$_m$/A$_t$ was 0.27, but 0.55 for nozzle.

• Analytical Science and Technology
• /
• v.14 no.5
• /
• pp.432-441
• /
• 2001

An automated on-line portable preconcentration-short column gas chromatograph was developed, which used preconcentrator using adsorption tube with Tenax-GR and Curie-point heating. The developed system operated with 3 steps of processing, preconcentration, thermal desorption, and analysis and cleaning, and could continued operating within 1~2 min cycle. The recoveries of preconcentrator for toluene was ranged between $94.7{\pm}6.6%$ and $103.8{\pm}3.1%$ with less than 7% of RSD. For benzene, toluene and xylene(BTX) standard gas test, IDL was 41, 49, $472ng/m^3$ benzene, toluene and o-xylene, respectively. The BTX mixture was analyzed within 30 sec with baseline separation by the system equipped with 4 m long capillary column. The deficiency of separation power caused by short column was solved by the control of sample injection volume and inlet/outlet pressure ratio. The automated portable preconcentration-short column gas chromatograph system was found to be useful for the continuous air monitoring of BTX at ppb levels in ambient air.

• Journal of the Korean Chemical Society
• /
• v.39 no.3
• /
• pp.204-212
• /
• 1995

The graphite furnace atomic absorption spectrophotometric determination of trace lead in water samples was studied using matrix modifiers. In order to modify the sample matrix, the type and optimum amount of the modifier were investigated with a given concentration of Pb solution. In fact, if the matrix is not modified, lead has low ashing and atomization temperatures as to give a low absorbance with bad reproducibility because of its volatility. Therefore, optimum modifiers should be used to stabilize the atomization. In this work, the ashing and atomization temperatures were raised from 400 and $1800^{\circ}C$, to 1,000 and $2000^{\circ}C$, by the addition of palladium to 50 ng/mL lead solution as a modifier. The concentration of palladium was 5.0 ${\mu}g/mL$ in the modified solution. Furthermore, if 1.5 ${\mu}g/mL$ of aluminum was mixed with the palladium modifier as an auxiliary modifier, the ashing temperature could be increased $150^{\circ}C$ additionally. With such a treatment, the sensitivity was improved more than 5 times of the solution unmodified and the reproducible results of less than 5% RSD were obtained in the samples of university's waste water and pipe-washing tap water. It could be concluded that this procedure was quantitative in the determination of trace lead from the recoveries of more than 88% obtained in the samples in which a given amount of lead was spiked.