• Journal of the Korean Ceramic Society
• /
• v.43 no.6 s.289
• /
• pp.351-357
• /
• 2006

The fabrication process of the honeycomb filter was investigated using synthesized cordierite with the addition of pore former and extrusion additives (either organic matter or graphite). Also, the effect of additives on the resultant properties of honeycomb filter such as porosity, thermal expansion coefficient and mechanical strength were investigated. With increasing the organic matter up to 10 wt%, porosity was increased but compressive strength was decreased. With increasing the graphite content, however, both porosity and compressive strength were increased. The specimen with an optimum processing condition (C-17A30G, sintering at $1150^{\circ}C$) was demonstrated 59% in porosity, 69 MPa in compressive strength, and $2.4{\times}10^{-6}/^{\circ}C\;(25{\sim}1000^{\circ}C$) in thermal expansion coefficient, which physical properties are appropriate for the honeycomb filter applications.

• Journal of the Korean Ceramic Society
• /
• v.23 no.3
• /
• pp.21-26
• /
• 1986

In this study the system of $Pb(Mn_{1/3} Nb_{2/3})O_3-PbTiO_3-PbZrO_3$ piexoelectric ceramics was made in the radial mode disk and attenuation characteristic of the desinged ladder type filter was investigated. What is more temperature dependance of resonant frequency and variation of resonant frequency was examined by chan-ging the electrode diameter of piezoelectric resonator. (A Group : De=11mm, B Group : De=7.5mm and C Gro-up : De=5.5mm) Upon investigation it was the following. The center frequency of A, B and c filter showed up in the 200KHz, 270KHz and 380KHz respectively. As the electrode diameter decreased center frequency in creased abruptly. As the Co_2/Co1 increased attenuation characteristics and selectivity was improved. As the x=50. resonant frequ-ency invaried with variation of temperature.

• Electrical & Electronic Materials
• /
• v.7 no.1
• /
• pp.73-79
• /
• 1994

페로브스카이트형 강유전체의 활발한 연구는 제2차 세계대전중 미국과 구 소련등에서 TiO$_{2}$ 고체 콘덴서를 개량하던 중에 Ba 이 첨가된 BaTiO$_{3}$를 발견하면서부터 시작되었고, 일본에서는 PbZr$_{0.5}$Ti$_{0.5}$O$_{3}$의 morphotropic phase boundary를 발견하면서부터 이루어졌으며, 그것이 지니는 특성때문에 고체콘덴서, 초전형 적외선 센서, 초음파 발생과 검출기, 압전 점화기 및 표면파필터기 등 여러방면에 실용화 되고 있다. 따라서, 본 보고에서는 지금까지 연구된 페로브스카이트형 강유전체 세라믹 재료의 물성을 소개하고 앞으로의 연구동향 등에 관하여 서술하고자 한다.

• 기계와재료
• /
• v.22 no.4
• /
• pp.22-35
• /
• 2010

저에너지 소모를 위한 대책으로 장치설비의 고효율화를 이루어 나가고 있으나, 고온 고압 등의 극한환경 하의 공정이 증가하면서 상기의 조건 하에서도 안정적으로 작동 가능한 다공질 세라믹스를 이용한 촉매기술 또는 포집 분리기술에 대한 필요성이 부각되고 있다. 본 고에서는 다공성 세라믹 소재가 특별히 유효하게 대응 가능한 대기오염과 관련하여 오염원 물질 및 오염의 실태를 살펴보고, 각종 다공성 세라믹스의 제조방법과 이에 따른 소재특성을 소개하고 시장의 현황과 전망을 정리하였다. 또한 다공성 세라믹 소재의 가장 대표적인 활용 형태인 하니컴 구조체의 제조방법 및 특성에 대하여 기술하고, 다공성 세라믹 소재의 실제 활용과 관련해서는 오염물질을 입자상물질과 가스상물질로 대별하여 대표적인 사용처와 소재를 수록하였으며, 차세대 신개념 필터로 연구 중인 반응소결 질화규소에 대해 언급하였다.

• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 2008.10a
• /
• pp.437-439
• /
• 2008

• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 1999.10a
• /
• pp.463-464
• /
• 1999

연소 또는 소자 공정 후 발생하는 폐가스에는 상당량의 분진이 포함되어 있기 마련이다. 이러한 폐가스 및 분진이 대기중으로 배출될 경우 심각한 대기오염을 일으키는 것은 주지의 사신이다. 그러므로 다양한 제어장치가 개발되어 분진과 가스를 제거한 후 무해한 가스만을 굴뚝을 통하여 배출한다.(중략)

• Proceedings of the Korean Institute of Communication Sciences Conference
• /
• 2006.07a
• /
• pp.749-749
• /
• 2006

• Membrane Journal
• /
• v.8 no.3
• /
• pp.117-129
• /
• 1998

The atmospheric pollution by diesel emission is mainly attributed to particulate matters and NO$_x$. Their regulation limits have become tighter. This paper reviews the characteristics and the fabrication method of the diesd particulate filter(DPF) which is used to control the particulate matters of diesel emission. First the constituent of particulate matters and the regulation standard are discussed and then the state of the art post-treatment system is reviewed. The materials, the fabrication method and the control of thermal expansion of the ceramic honeycomb filter, which is widely used as the DPF, are also reviewed.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.2 no.5
• /
• pp.58-65
• /
• 1994

In order to reduce particulate emissions from diesel vehicles, mathematical model is established and analyzed on ceramic wall-flow monolith filter. A wall-flow monolith filter placed in the exhaust stream of a diesel engine can effectively limit the emission of diesel particulates through the monolith. The accumulated particulates can then be periodically combusted inside the monolith by directing hot gas to the monolith while normal engine exhaust is routed around the monolith system. The resulting low flow rates through the monolith require consideration of gas dynamics through the channels as well as particulate combustion to analyze this regeneration process. A mathematical model of the regeneration is formulated as a system of nonlinear partial differential equations describing the conservation of mass, momentum and energy. Numerical solutions are obtained by using a finite difference techniques for the spatial discretization. So we can use filter simulation program for the purpose of filter design and actual filter regeneration

• Korean Journal of Materials Research
• /
• v.33 no.7
• /
• pp.285-294
• /
• 2023

Porous ceramics are used in various industrial applications based on their physical properties, including isolation, storage, and thermal barrier properties. However, traditional manufacturing environments require additional steps to control artificial pores and limit deformities, because they rely on limited molding methods. To overcome this drawback, many studies have recently focused on fabricating porous structures using additive manufacturing techniques. In particular, the binder jet technology enables high porosity and various types of designs, and avoids the limitations of existing manufacturing processes. In this study, we investigated process optimization for manufacturing porous ceramic filters using the binder jet technology. In binder jet technology, the flowability of the powder used as the base material is an important factor, as well as compatibility with the binder in the process and for the final print. Flow agents and secondary binders were used to optimize the flowability and compatibility of the powders. In addition, the effects of the amount of added glass frit, and changes in sintering temperature on the microstructure, porosity and mechanical properties of the final printed product were investigated.