• Ceramist
• /
• v.23 no.1
• /
• pp.38-53
• /
• 2020

Magnetoelectric (ME) composites composed of magnetostrictive and piezoelectric materials derive interfacial coupling of magnetoelectric conversion between magnetic and electric properties, thus enabling to detect ultra-low magnetic field. To improve the performance of ME composite sensors, various research teams have explored adopting highly efficient magnetostrictive and piezoelectric phases, tailoring of device geometry/structure, and developing signal process technique. As a result, latest ME composites have achieved not only outstanding ME conversion coefficient but also sensing of ultra-low magnetic field below 1pT. This article reviews the recent research trend of ME composites for sensing of ultra-low magnetic field.

• Proceedings of the Korea Contents Association Conference
• /
• 2017.05a
• /
• pp.475-476
• /
• 2017

손상된 조직이나 부위를 원상태로 회복하기 위한 대제 물질인 생체재료 개발에 관한 연구가 꾸준히 이루어지고 있다. 이러한 생체재료는 생체내에서 기능을 수행하기 위한 기계적 특성과 생물학적 특성을 갖추어야 한다. 생분해성 고분자는 금속재료에 비해 우수한 분해성으로 널리 사용되고 있다. 그러나 대부분의 생분해성 고분자는 약한 기계적 특성으로 사용범위가 제한적이다. 문제점의 해결을 위해 hydroxyapatie와 TCP등을 활용한 방법이 제시되어왔다. 이에 본 연구는 ${\beta}-TCP$ 첨가량에 따른 세라믹/고분자 복합체를 제조하여 다양한 기계적 효과를 평가하였다.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2014.11a
• /
• pp.299-299
• /
• 2014

엔진블럭 사이를 왕복 운동하는 피스톤은 엔진블럭과의 마찰은 불가피한 상태일 수밖에 없으며 이렇게 된다면 엔진블럭 또는 피스톤의 파손, 변경이 있을 수밖에 없다. 피스톤에 대한 연구는 이러한 파손, 변경을 최소화시키기 위해서 내마모성, 내열성 그리고 내구성을 향상시키는데 목적을 두고 있다. 본 실험은 APS법으로 제작된 자기윤활복합코팅층을 준비해 레이저표면텍스처링을 넣어 마찰 실험을 하였다. 기지재로는 알루미나-지르코니아복합체를 사용하였고, 고체윤활제로는 $CaF_2$ 및 $BaF_2$을 사용하였다.

• Proceedings of the KIEE Conference
• /
• 1997.07d
• /
• pp.1439-1442
• /
• 1997

We investigated the electrical and CO sensing properties of ZnO-$TiO_2$ composite ceramics. The electrical conductivities and relative dielectric constants of $TiO_2$ added ZnO increased with increasing $TiO_2$ content in air. The calculated dielectric constants of 3mol%, 5mol%, and 7mol% $TiO_2$ added ZnO were 7, 13, and 120, respectively. The measured CO sensivities were $1{\sim}6.42$ in the temperature range from $100^{\circ}C$ to $400^{\circ}C$.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2002.04b
• /
• pp.8-8
• /
• 2002

서멧이란(Cermet) '세라믹 경질상과 금속 결합상의 복합체"를 의미하나 절삭 골구계에서는 좁은 의미의 "TiC 혹은 Ti(CN)을 바탕을 Ni,Co를 결합상으로 하는 초경재료"를 의미한다. 이런한 서멧은 전략 물질적 성격이 강한 Co,W로 구성된 WC-Co 초경 합금을 대체하기 위해 고안되었는ㄴ데 ㄴ놓은 경도와 고온에서의 화학적 안정성, 낮은 비중과 저렴한 원료 가격등이 장점이나 WC-Co에 비해 상대적으로 낮은 인성이 문제점으로 지적 되어왔다.TiC-Ni 서멧의 낮은 인성을 향상시키기 위해 Ti(CN) 고용체를 바탕으로 하고 제2ㅇ, 제3의 탄화물이나 질화물을 첨가하는 개발 연구가 과거 30여 년간 진행되어왔다. 그러나 많은 연구결과가 조성 개발 위주로 진행되어 왔고, 또 실험간의 불일치와 재현성 결여로 인해 보여진 여러 현상에 대한 보편적인 결론을 내리기 힘든 점이 있었다. 특히, 미세구조와 기ㅔ적 특성에 관한 통합적이고 조직적인 연구가 진행되지 못하였다. 이번 발표에서는 발표자 실험실에서 지난 8 년 간 행하여 온 실험 결과를 바탕으로 탄화물서멧에 나타나는 독특한 현상, 고용체 탄질화물의 열역학적 안정성, 서멧 재료의 유심구조, 표면 에너지 및 strain, 에너지가 미세 구조 형성에 미치는 영향, 그리고 표면층 형성 등 서멧 개발에 관한 중요 관심사에 대해 간단히 살펴보려고 한다.해 간단히 살펴보려고 한다.

• Journal of the Korean Ceramic Society
• /
• v.41 no.8
• /
• pp.599-604
• /
• 2004

The LTCCs (Low-Temperature Co-fired Ceramics) are very important for electronic industry to build smaller RF modules and to fulfill the necessity for miniaturization of devices in wireless communication industry. The dielectric materials with sintering temperature $T_{sint}$＜90$0^{\circ}C$ are required. In this study, BaO-N $d_2$ $O_3$-Ti $O_2$ (BNT ： 20∼40 wt％) for ceramic materials and L $a_2$ $O_3$- $B_2$ $O_3$-Ti $O_2$ (LBT ： 80∼60 wt％) for crystallizable glasses were used. The glass/ceramic composites were investigated for sintering behavior, phase evaluation, densities, interface reaction and microwave dielectric properties. It was found that the addition LBT glass frist significantly lowered the sintering temperature to below 90$0^{\circ}C$ and the densification with increasing addition LBT glass frist developed rapidly which was meant to be namely 90％ of relative density. The sintered bodies ekhibited applicable dielectric properties, namely 15 for $\varepsilon$$_{r}$,, 10000 GHz for Q＊ $f_{0}$. The results suggest that the composites have good potential as a new candidate for LTCC materials.

• Journal of the Korean Ceramic Society
• /
• v.39 no.11
• /
• pp.1074-1082
• /
• 2002

Nanocomposite PMN-PT-BT/Ag/MgO was prepared by sintering at $950{\circ}C$ with addition of $AgNO_3$ and MgO sol to the PMN-PT-BT powder sinterable at $1200{\circ}C$. The low-temperature-sinterable PMN-PT-BT/Ag powder prepared by the modified mixed oxide method was calcined at $600{\circ}C$ for 1h and surface modified with the MgO sol of 0-10 wt% and then subjected to consolidation at $850-950{\circ}C$ for 4h under a flowing oxygen. The nanocomposite PMN-PT-BT/Ag/MgO(0.5wt%) sintered at $950{\circ}C$ showed the microstructure with grains of $1-3{\mu}m$, the second phase of MgO of $0.1-0.3{\mu}m$ by SEM and Ag of << $1{\mu}m$ qualitatively by SIMS. It showed the sintered relative density of 99%, the room temperature dielectric constant of 17200, the dielectric loss of 2.1% and the specific resistivity of $5.46{\times}10^{12}{\Omega}{\cdot}cm$. But the PMN-PT-BT/Ag/MgO(0 wt%) nanocomposite sintered at $950{\circ}C$ showed a little better properties : the sintered relative density of 99.5%, the room temperature dielectric constant of 19500, the dielectric loss of 2.1% and the specific resistivity of $7.30{\times}10^{12}{\Omega}{\cdot}cm$.

• Journal of the Korean Ceramic Society
• /
• v.42 no.3 s.274
• /
• pp.155-164
• /
• 2005

The characteristics of sintering for Mullite-Cordierite (MC) composites and the effect of $TiO_2$ addition were studied. The MC composites were manufactured by a solution-polymerization method using PVA as a polymer carrier, and $TiO_2$ was used as a sintering agent. They were calcined at $1300^{\circ}C$, planetary milled for 4 h and sintered at $1450^{\circ}C$. As cordierite content increased, relative density of materials was increased up to $98\%$ and sinterability was improved. In case of $50\;wt\%$ mullite/$5\;wt\%$ cordierite composition sintered for 16 h, the flexural strength and thermal expansion coefficient were 190 MPa and $3.07{\times}0^{-6}/^{\circ}C$, respectively. However, mechanical properties were decreased with the cordierite contents higher than $50\;wt\%$ because of the excess liquid-phase amount. As the addition of $TiO_2$ is increased, columnar crystal of mullite and liquid-phase contents were increased. In particular, the flexural strength and thermal expansion coefficient decreased in case of $5\;wt\%\;TiO_2$ addition.

• Journal of the Korean Ceramic Society
• /
• v.39 no.7
• /
• pp.704-709
• /
• 2002

To improve the mechanical properties of $Al_2$O$_3$/ZrO$_2$composites, the homogeneous dispersion of ultra low size ZrO$_2$ particles in $Al_2$O$_3$ceramics have been controlled by coprecipitation method. In case of mechanical mixing of ZrO$_2$ powders with $Al_2$O$_3$, homogeneous dispersion and controlling the ZrO$_2$ size were relatively difficult due to high sintering temperature. So nanosized Zr hydroxide was coprecipitated from ZrOCl$_2$/Y(NO$_3$)$_3$ solution with commercial sub-micron sized $\alpha$-alumina (Sumitomo : AES-11(0.4 ${\mu}{\textrm}{m}$)) and high purity ultra low sized $\alpha$-alumina (Taimei Chemical (0.22 ${\mu}{\textrm}{m}$)) for low temperature sintering. By this partial coprecipitation method, relatively low sized ZrO$_2$ dispersion in $Al_2$O$_3$/ZrO$_2$ composites was achieved at 150$0^{\circ}C$-1$600^{\circ}C$ of sintering temperature range and their mechanical properties were measured.

• Journal of the Korean Ceramic Society
• /
• v.39 no.9
• /
• pp.846-850
• /
• 2002

A PMN-PT-BT/Ag composite was prepared by surface modification with MgO sol with hoping to suppress silver's migration during sintering. The mixture of PbO, $N_2O_5,\;TiO_2\;with\;Mg(NO_3)_2$ instead of MgO was ball milled, the solvent was removed and then the dried powders were calcined at 950$^{\circ}C$/1h. The calcined powder were treated with 3.0 mol% $Ag_2O$ and 1.0 wt% MgO sol and calcined at 550$^{\circ}C$/1h. The dielectrics sintered at 1000$^{\circ}C$/4h under a flowing oxygen showed the density of 7.84g/$cm^3$, the room temperature dielectric constant of 18400, the dielectric loss of 2.4%, the specific resistivity of $0.24{\times}10^{12}{\Omega}{\cdot}cm$. It also showed the bending strength of $120.7{\pm}11.26$ MPa and the fracture toughness of $0.87{\pm}0.002\;MPam^{1/2}$ which were comparable to commercial PZT. The microstructure sonsisted of grains of ∼4${\mu}m$. SEM and SIMS analysis showed that Ag grew as ∼1${\mu}m$ and excess MgO as ∼0.5${\mu}m$.