• Membrane Journal
• /
• v.32 no.2
• /
• pp.100-108
• /
• 2022

Among various industries, the textile industry uses the largest amount of water for coloring textiles which leads to a large amount of wastewater containing various kinds of dye. There are various methods for the removal of dye such as flocculation, ozone treatment, adsorption, etc. But these processes are not much successful due to the issue of recycling which enhances the cost. Alternatively, the membrane separation process for the treatment of dye in wastewater is already documented as the best available technique. Polymeric membrane and ceramic membrane are two separate groups of separation membranes. Advantages of ceramic membranes include the ease of cleaning, long lifetime, good chemical and thermal resistance, and mechanical stability. Ceramic membranes can be prepared from various sources and natural materials like clay, zeolite, and fly ash are very cheap and easily available. In this review separation of wastewater is classified into mainly three groups: ultrafiltration (UF), microfiltration (MF), and nanofiltration (NF) process.

• Korean Journal of Materials Research
• /
• v.4 no.1
• /
• pp.3-8
• /
• 1994

Recently, sound and mechanical vibration are becoming important problems in our life. In the present study, the measurement of vibration absorption characteristics of barium titanate ceramics and the investigation of its relationship to microstructures were carried out. The barium titanate ceramics is expected to be better vibration absorption material owing to its chemical and physical stability than other conventional vibration absorbers like glasswool board. Barium titanate ceramics were prepared by sintering fiberous $BaTiO_{3}$ crystallites in order to enhance the vibration absorption characteristics. The fiberous $BaTiO_{3}$ ceramics were prepared through the ionic exchange after the preparation of fiberous $K_2Ti_4O_9$ with 0.2$\mu\textrm{m}$, 1.2$\mu\textrm{m}$, 2.0$\mu\textrm{m}$, diameter length by KDC method. The fiberous crystallites were oriented in a plane perpendicular to the press direction and sintered. The investigation of the grain diameters of the sintered ceramics, equivalent factor, electromechanical coupling factor($k_1$), and the generated voltage(V) shows that the grain's diameter decreases with the increase of the diameter of the used fiberous crystallites. The vibration absorption increases the crystallites' diameter. That means that the vibration absorption increases with the internal friction of grain boundary. Which was identified by the investigation of the equivallent circuit.

• Ceramist
• /
• v.7 no.1
• /
• pp.47-60
• /
• 2004

골 대체재에서 생체활성재라 함은 이 물질이 체내에 식립 되었을 때 표면에 사람의 뼈와 물리적, 화학적으로 매우 유사한 성질을 갖는 저결정성 탄산 아파타이트가 스스로 형성되어 이 층을 매개로 하여 섬유성 조직의 생성 없이 신생골과 직접적으로 결합하는 능력을 갖는 물질을 말한다. 이와 같은 생체활성 물질은 1970년대 초 Hench가 Na$_2$O-CaO-SiO$_2$-P$_2$O$\^$5/ 글래스계에서 처음으로 발견하였으며 이를 Bioglass$\^$ⓡ/라고 명명한데서부터 유래한다. 그 후 결정성 아파타이트가 함유된 결정화 글래스인 Ceravital$\^$ⓡ/, 고결정성 아파타이트, 아파타이트와 wollastonite 결정을 포함한 Cerabone$\^$ⓡ/, 아파타이트와 phlogophite를 함유한 Bioverit$\^$ⓡ/, MgO-CaO-SiO$_2$-P$_2$O$\^$5/ 글래스, CaO-SiO$_2$ 글래스, ${\beta}$-tricalcium phosphate, 천연 calcite 등의 다양한 세라믹 물질이 생체활성을 갖는 것으로 보고되었다.(중략)

• Journal of the Korean Ceramic Society
• /
• v.31 no.2
• /
• pp.161-170
• /
• 1994

For the preparation of short ceramic fibers of which average length might be in accordance with the opening size of sieve, e.g., 150${\mu}{\textrm}{m}$ or 300${\mu}{\textrm}{m}$, bulk fibers were grounded on sieve screen by applying both compressing and shearing force, and passed through the sieve screen. The grounded fibers were subjected to gravitational settling processes. The classified fibers were observed by scanning electron microscopy and the length of each fiber was measured to correlate the average length with the opening size of the sieve used for grinding bulk fibers. Theoretical analysis show that a free settling technique is ineffective for the classification of fibers by length compared with that of particles. The average lengths of classified fibers estimated by scanning electron microscopy were in good agreement with those obtained by relative packing volume of the fibers. Accordingly, it is confirmed that average fiber lengths can be determined from bulk volume data without photographing, counting and averaging results for hundreds of fibers.

• Journal of the Korean Ceramic Society
• /
• v.30 no.12
• /
• pp.1066-1070
• /
• 1993

When looked upon as a polycrystalline, ceramics have two basic differences from a single crystal. One is that there exist grain boundaries, the other is that the crystal axes of each small crystal are arranged in random directions. But the crystal axes fo small crystals which compose ceramics may be made to have the tendency of being arranged in a specific direction. This is called that the crystal axes are oriented. The degree of the direction arrangement of the crystal axes is called orientation. In order to orient the crystal axes effectively, the fiberous barium titanates were made through KDC method and the ion exchange method. And then they were arranged through pressing, doctor blade, and syringe. As the result of Lotgering evaluation, the sample oriented through syringe showed the highest orientation. After sintering, though the most particles that had been fiberous shaped became global shape viewed through SEM, the orientation of the crystals was reinforced by means of sintering.

• Proceedings of the Korean Institute of Industrial Safety Conference
• /
• 1998.05a
• /
• pp.45-50
• /
• 1998

최근 항공기, 자동차 및 각종 플랜트 설비의 고온용 경량 내열성 소재로서 구조용 세라믹스 재료가 큰 주목을 받고 있다. 그러나, 이러한 구조용 세라믹스 재료도 어느 이상의 고온에서는 크지 않은 응력하에서도 크립에 의한 영구 변형이 일어나서 강도 저하 및 치수 변화로 이어지며, 이로 말미암아 정밀 부품으로서의 기능을 상실할 뿐 아니라 심한 경우에는 파손에까지 이를 수 있다. (중략)

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2003.03a
• /
• pp.69-69
• /
• 2003

• Ceramist
• /
• v.10 no.4
• /
• pp.54-69
• /
• 2007

• Proceedings of the Materials Research Society of Korea Conference
• /
• 1993.05a
• /
• pp.124-124
• /
• 1993

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.32 no.6
• /
• pp.477-482
• /
• 2019

This study investigated the influence of the viscoelastic property of slag when producing glass fiber, MFS631 with 60% of manganese slag, 30% of steel slag, and 10% of silica stone. To fabricate the MFS631 glass bulk, slag materials were placed in an alumina crucible, melted at $1,550^{\circ}C$ for 2 h, and then annealed at $600^{\circ}C$ for 2 h. It was found that glass is non-crystalline through X-ray diffraction analysis. MFS631 fiber was produced at speed in the range of 100~300 rpm at $1,150^{\circ}C$. The loss modulus (G") and storage modulus (G') of the produced glass fiber were evaluated at high temperatures. G' and G" of MFS631 were greater than $893^{\circ}C$, and the modulus value was 136,860 pa. This is similar to the results of a general E-glass fiber graph. Therefore, it was concluded that its spinnability is similar to that of E-glass fiber; therefore, it can be commercialized.