• Proceedings of the Korea Water Resources Association Conference
• /
• 2006.05a
• /
• pp.1737-1740
• /
• 2006

본 연구에서는 1차원 수치모형을 이용하여 댐 여수로에서 발생하는 흐름을 해석하였다. 본 연구에서 사용한 1차원 수치모형은 매우 복잡한 지형에 적용이 가능하며, 상류가 사류가 동시에 발생하거나 도수가 발생하는 흐름도 해석할 수 있는 모형이다. 이 모형은 해석해를 가지는 도수의 경우에 적용하여 검증된 바 있으며, 자연하천의 보에서 발생하는 불연속 흐름에 대해서도 적용된 바 있다. 또한 매우 불규칙한 자연하천에서 발생하는 흐름도 효과적으로 모의할 수 있다. 본 연구에서는 댐 여수로 흐름 해석을 평가하기 위해 단순화된 하도에서 발생하는 불연속 흐름에 대해 이론적인 해와 비교하였다. 또한 댐 수리모형 결과에 수치모형을 적용하여 빈도별로 발생하는 흐름을 해석하였다. 해석결과 여수로에서 발생하는 매우 작은 수심을 정확하게 모의하였으며, 여수로 직하류부에서 발생하는 도수의 발생위치, 발생 전후의 수위도 잘 모의하는 것으로 나타났다. 또한 여수로 및 도수 전후에 발생하는 유속도 정확하게 모의하는 것으로 나타났다. 또한 본 연구에서는 1차원 수치모형을 여수로 뿐만아니라 댐 상류 하천, 저수부, 여수로 접근수로, 여수로, 도수, 하류하천등으로 구성되는 전 구간의 흐름을 동시에 모의하기 적용하였다. 적용 결과 댐 저수지 상류 하천과 저수지, 저수지와 접근수로, 접근 수로와 여수로, 여수로와 도수, 도수 발생 후와 하류하천 등에서 복잡하게 형성되는 흐름을 동시에 잘 모의하는 것으로 나타났다. 본 연구에서 사용한 1차원 수치모형을 이용하면 댐 여수로나 저수지, 연계되어 있는 상하류 하천에서의 흐름을 동시에 해석할 수 있기 때문에 향후 수리모형실험과 연계하여 댐 설계에 효율적으로 사용될 수 있을 것으로 전망된다.지는 것으로 평가되었다. 그러나 본 연구결과를 통하여 투수성 포장과 지하수에 관련된 매개변수의 집적과 분석결과는 현장기술 적용 시 매개변수의 유용한 선택과 도시유역의 물 순환 건전화 대안기술 적용에 효과적인 방법론을 제시할 수 있을 것으로 사료된다.첨두홍수량을 저류하기 위해서 상대적으로 넓은 저류면적이 필요한 것으로 나타난다. 대등한 수위감소값의 홍수저감효과를 발휘하기 위해서 본 연구에서는 On-Line 저류지 면적은 Off-Line 저류지에 비 두배 이상이 필요한 것으로 보여졌다.들에 관한 정보는 종종 현장관측에서 조차 무시되는 경우가 많다. 이에 본 연구에서는 수질모형의 매개변수 중 특히 수리특성에 관련된 매개변수들이 수질에 미치는 영향을 파악하는 것을 목적으로 하고 있다. 이를 위해 적용된 수질모형은 QualKo를 사용하였으며, 대상 하천은 낙동강 본류 경남구간 시점 부근인 회천 합류 전부터 낙동강 본류 경남구간 종점 부근인 밀양강 합류 전까지의 경남 오염총량관리 기본계획 시 구축된 모형 매개변수를 바탕으로 분석을 수행하였다. 일차오차분석을 이용하여 수리매개변수와 수질매개변수의 수질항목별 상대적 기여도를 파악해 본 결과, 수리매개변수는 DO, BOD, 유기질소, 유기인 모든 항목에 일정 정도의 상대적 기여도를 가지고 있는 것을 알 수 있었다. 이로부터 수질 모형의 적용 시 수리 매개변수 또한 수질 매개변수의 추정 시와 같이 보다 세심한 주의를 기울여 추정할 필요가 있을 것으로 판단된다.변화와 기흉 발생과의 인과관계를 확인하고 좀 더 구체화하기 위한 연구가 필요할 것이다.게 이루어질 수 있을 것으로 기대된다.는 초과수익률이 상승하지만, 이후로는 감소하므로, 반전거래전략을 활용하는 경우 주식투자기간

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.29 no.5
• /
• pp.483-490
• /
• 2016

In plant industry, sulfur storage tank is made of steel and annular plate is connected with concrete foundation of ring wall type by anchor bolt. Due to keep sulfur at high temperature in tank by coil, sulfur storage tank is expanded larger than another tank stores fluid at room temperature. Generally, structural design of tank foundation is performed analysis with loading of temperature gradient between inner and outer surface, this method can't consider the phenomenon that load is intensively transferred to concrete foundation at anchor bolt. This means that temperature load is underestimated and causes crack of concrete near anchor bolt. In this study, evaluation formula considering temperature load transfer mechanism through anchor bolt is proposed and load acting on concrete foundation is rationally decided. For this purpose, it is analyzed variation of thermal load per various anchor bolt number using finite element model including tank annular plate and anchor bolt. Solution is proposed as specified term combining result of analysis and theoretical solution for evaluating load transferred by anchor bolt. For confirmation of validation of proposed formula, it is applied in design of sulfur storage tank at plant site, it shows that the formula can be practically applied.

• Composites Research
• /
• v.26 no.6
• /
• pp.363-372
• /
• 2013

Numerical simulation for Resin Transfer Molding manufacturing process is attempted by using the eXtended Finite Element Method (XFEM) combined with the level set method. XFEM allows to obtaining a good numerical precision of the pressure near the resin flow front, where its gradient is discontinuous. The enriched shape functions of XFEM are derived by using the level set values so as to correctly describe the interpolation with the resin flow front. In addition, the level set method is used to transport the resin flow front at each time step during the mold filling. The level set values are calculated by an implicit characteristic Galerkin FEM. The multi-frontal solver of IPSAP is adopted to solve the system. This work is validated by comparing the obtained results with analytic solutions. Moreover, a localization method of XFEM and level set method is proposed to increase the computing efficiency. The computation domain is reduced to the small region near the resin flow front. Therefore, the total computing time is strongly reduced by it. The efficiency test is made with a simple channel flow model. Several application examples are analyzed to demonstrate ability of this method.

• Journal of the Korean Chemical Society
• /
• v.52 no.1
• /
• pp.73-83
• /
• 2008

The purpose of this study was to investigate the types of conceptions of mixing phenomena related to dissolution and diffusion in high school students. The subjects of the investigation consisted of 108 students who took chemistry I course at 11th grade and 29 students who took chemistry II course at 12th grade. For this study, it was found that the many students had the alternative conception that chalk didn't dissolve in water because chalk was a nonpolar material. Most of the students understood the phenomena which carbon tetrachloride and water will not mix as the attraction conception. But many of the other students understood the phenomenon as characteristic of the materials such as difference of density. Many of the students understood the phenomenon of mixing ethanol and water constantly as ‘Attraction conception'. The phenomenon which is mixed ink and water was just accepted by the most students as the spreading of ink in water without understanding the reason of mixing. The phenomena of mixing iodine and carbon tetrachloride was understood as ‘Space conception' or ‘Attraction conception'. It could be inferred that the diverse alternative conceptions related to dissolution and diffusion phenomena were generated by the absence of entropy concept. Therefore, the explanations of science textbooks related to dissolution and diffusion phenomena need to change for students to understand them correctly.

• Culinary science and hospitality research
• /
• v.16 no.4
• /
• pp.15-27
• /
• 2010

As most companies in the world are much interested in the overseas market as well as in the domestic market, many Korean food service enterprises came to focus on extending their branches to the overseas market. However, lack of business strategies including market research, marketing strategies, localization, etc. has made them continue to fail in market entry. The purpose of this study is to develop entry mode of determinants of Korean food service enterprises, considering their characteristic factors and environment factors in the overseas market. To do this, companies which have a head quarter in Korea and over 2 year business experience in the overseas market were chosen and used for a self-administered questionnaire survey. Statistical processing, including descriptive statistics, logistic regressing analysis, and multi regression analysis using an SPSS/PC 12.0 statistical package were conducted The result is as follows. First, explanation suitability was 85% of the entry mode in the overseas market. Second, as business size was smaller, product differentiation was higher, and CEO's will for success in the overseas market was higher, independent entry mode in the overseas market was likely to he chosen. Lastly, as the uncertainty of demand and trade barrier were lower, and a sociocultural gap was smaller, independent entry mode in the overseas market was likely to be chosen.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.5 no.1
• /
• pp.52-64
• /
• 1995

Robot manipulator is a highly nonlinear-time varying system. Therefore, a lot of control theory has been applied to the system. Robot manipulator has two types of control; one is path planning, another is path tracking. In this paper, we select the path tracking, and for this purpose, propose the intelligent control¬ler which is combined with fuzzy logic and neural network. The fuzzy logic provides an inference morphorlogy that enables approximate human reasoning to apply to knowledge-based systems, and also provides a mathematical strength to capture the uncertainties associated with human cognitive processes like thinking and reasoning. Based on this fuzzy logic, the fuzzy logic controller(FLC) provides a means of converhng a linguistic control strategy based on expert knowledge into automahc control strategy. But the construction of rule-base for a nonlinear hme-varying system such as robot, becomes much more com¬plicated because of model uncertainty and parameter variations. To cope with these problems, a auto-tuning method of the fuzzy rule-base is required. In this paper, the GA-based Fuzzy-Neural control system combining Fuzzy-Neural control theory with the genetic algorithm(GA), that is known to be very effective in the optimization problem, will be proposed. The effectiveness of the proposed control system will be demonstrated by computer simulations using a two degree of freedom robot manipulator.

• Journal of Korean Society of Transportation
• /
• v.30 no.6
• /
• pp.27-36
• /
• 2012

In Korea, 28,641 cases of traffic accidents were caused by drunk driving in 2010. These statistics accounted for 12.62% of total number of traffic accidents. Moreover, the percentages of deaths and injuries from them were nearly 15% of those from whole traffic accidents. While police has emphasized enforcement efforts in order to reduce drunk driving, culture generous to drunk driving in addition to the absence of an appropriate intervention system for habitual drunk drivers have contributed to the increasing number of the drunk driving accidents in Korea. This study examined specific behavioral changes in drunk driving by comparing drivers' behavior pattern in non-alcoholic condition to those in alcoholic condition, using a psychomotor test and a driving simulator. In the psychomotor test measuring participants' reactions to the target stimulus, it was revealed that participants' correct responses were decreased, false responses were increased, and no responses also were increased after drinking. Furthermore, in the driving simulator performance after drinking, not only driving speed was faster but also the deviation of an accelerator pedal pressure and of the vehicle's lateral position were much increased. These results indicated that alcohol consumption would impair visio-cognitive ability and deteriorate driving safety. Finally, the implications and limitations of our findings and suggestions for the future research were discussed.

• Journal of Advanced Navigation Technology
• /
• v.17 no.5
• /
• pp.475-483
• /
• 2013

In this paper, the performances of modeling methods for combining corrections from multiple reference stations for network user were compared and analyzed. The longer the distance between reference station and user is, the more the GPS errors are decorrelated. Based on this point, multiple corrections from reference stations which is constituting a network should be combined properly to be applied for user observation to eliminate GPS errors. There are many widely used conventional modeling methods and they are applied for Compact Network RTK users and user position accuracy is predicted by using residual errors in observation of user. Compact Network RTK is a technique of generating corrections which was developed by Seoul National University. As a result, the horizontal and vertical accuracies were within about 5 cm and 7 cm respectively with 95 % probability for all conventional modeling methods. In addition, we analyzed condition for reference station constellation for modeling method using height information.

• Journal of the Korean Geotechnical Society
• /
• v.24 no.5
• /
• pp.107-115
• /
• 2008

This paper is performed to examine the effect of creep during the primary consolidation and the applicability of the Yin's EVP (Elasto-Visco-Plastic) model. In ordinary consolidation theories using the elastic model, the primary consolidation process can be expressed but the secondary consolidation process cannot. It is due to the viscosity, which can express the secondary consolidation, and is sometimes related to the scale effect (difference of the thickness of clay layer between laboratory sample and field condition) such as hypotheses Type A and Type B shown by Ladd et al. (1977). Usually, the existence of the creep during the primary consolidation has been conformed and the Type B is well acceped. On the other hand, from the large-scaled consolidation tests the intermediate characteristic between Type A and Type B was proposed as Type C by Aboshi (1973). In this study, to clarify the effect of creep on the settlement-time relation during the primary consolidation in detail, Type B consolidation tests were performed using the separate-type consolidation test apparatus for a peat and clay. Then the test results were analyzed by using Yin's EVP Model (Yin and Graham, 1994). In conclusion, followings were obtained. At the end of primary consolidation, the compression for the subspecimens should not be the same because of the difference of the excess pore water pressure dissipation rate. And the average settlement measured by the separate-type consolidometer coincides with the analyzed one using the Yin's EVP model. As for the dissipation of the excess pore water pressure, however, the measured excess pore water pressure dissipates faster compared with the Yin's model.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.3D
• /
• pp.499-509
• /
• 2006

Precast concrete deck has many advantages comparing with the in-situ concrete deck, and has been successfully applied to replacement of the deteriorated decks and to the newly constructed highway bridges in domestic region. In order to apply the precast decks into the railway bridges, however, differences of the load characteristics between the highway and the railway should be properly taken into account including the train load, longitudinal force of the continuous welded rail, acceleration or braking force, temperature change and shrinkage. Proper level of the longitudinal prestress of the tendons that can ensure integrity of the transverse joints in the deck system is of a primary importance. To this aim, the longitudinal tensile stresses induced by the design loads are derived using three-dimensional finite element analyses for the frequently adopted PSC composite girder railway bridge. The effect of the temperature change is also investigated considering the design codes and theoretical equations in an in-depth manner. The estimated proper prestress level to counteract those tensile stresses is above 2.4 MPa, which is similar to the case of the highway bridges.