• Polymer Science and Technology
• /
• v.20 no.2
• /
• pp.157-169
• /
• 2009

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.2
• /
• pp.450-455
• /
• 2017

A shield connector is an automotive electrical component that is used to connect electrical wiring in a vehicle. This part is made by progressive pressing using a phosphor bronze material with high electrical conductivity. The shape of the product is not complicated, but plastic forming techniques are required, such as deep drawing and bending, as well as shearing techniques such as piercing and notching. The finite element method was used to model the process. The strip layout design stage of the progressive die makes it possible to examine the thickness change, the stability of the forming process, and the spring-back. As a result of this analysis, it is possible to predict the correction values for the tendency of cracks, wrinkles, and incomplete plastic deformation, and to identify possible problems in advance. As a countermeasure against the forming error caused by the drawing process analysis, the drawing shape was modified and applied in the process design. For effective material utilization, a 3D strip layout was designed using an optimized blank shape based on nesting. The results improve the crack stability and spring-back of shield connector products produced through progressive pressing.

• 기계와재료
• /
• v.23 no.3
• /
• pp.16-29
• /
• 2011

결정 합금 대비 비정질 합금은 높은 경도를 갖기 때문에 마모 저항성도 좋고 내부 식성 등 환경에 대한 저항성도 월등하며, 또한 과냉된 액상 상태까지 재가열하게 되면 낮은 점성도를 갖게 되므로 복잡한 3차원적인 형상을 가지는 부품을 환경에 대한 저항성, 피로 저항성, 강도 및 경도 등을 모두 고려하여 높은 정밀도를 가지고 제조하는 것이 가능하므로 우수한 물성을 갖는 구조 및 기능성 재료로의 다양한 응용이 타진되고 있다. 이러한 비정질 합금의 변형 거동에 대한 연구는 대부분 유리 천이 온도 이하에서의 전단 및 파단에 이르는 이른바 불균일 변형(Inhomogeneous Deformation) 거동에 대한 이해를 위한 실험 및 해석적 연구에 집중되어 왔다. 반면 상업화의 기반이 되는 고상 기반 2차 정형 성형은 과냉 액상 영역에서의 구조 완화 및 결정화롤 대표되는 미세 구조 제어 균일 변형(Homogeneous Deformation)에 대한 이해 없이는 불가능하므로, 이러한 관점에서 비정질 합금 특유의 점성 유동 특성을 이용한 균일 변형 응용 예시 및 미세구조 변화 연계 해석 기술의 현황을 소개하고자 한다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.1
• /
• pp.35-42
• /
• 2015

Injection molding is a high efficient manufacturing technology for producing plastic parts. On the other hand, the warpage of molded plastic parts is an ubiquitous problem in the injection molding process. The main objective of this study was to minimize the amount of warpage occurring in the injection molding process of a hopper of ATDPS made of crystalline polymer (PP) instead of amorphous polymer (ABS). The moldflow CAE simulation was conducted for the molding process of the hopper to clarify the injection moldability, shear rate, shear stress, warpage by changing the gate shape and the number of ribs installed on the top of the hopper flange. The wide gate shape of runner system and multiple rib installation were found to be useful for minimizing the warpage of the hopper. The validity of the CAE simulations was supported by the injection molding experiment for the optimized design case.

• Journal of the Korea Convergence Society
• /
• v.2 no.2
• /
• pp.27-34
• /
• 2011

This study is making a product for the development of one process worm wheel of making a shape for gear for worm wheel without hobbing manufacturing process. Because of removing a hobbing process, plastic worm wheel for increased productivity and equivalent quality is produced in the result. As the result, this product is selling to Hyundai Mobis, Mando, TRW, KOYO/NSK/Showa(Japan), Delphai(America). The core technology and different strategy are as follows. The technology protection for molding of worm whee is currently patent process "Molding process of helical gear(No. 10-2008-0105908). Further patent procedure for "molding system for positioning decision of inserting boss is currently prepared. As gear molding procedure in hobbing machine without gear machining procedure, most of all, core development technology which is making a gear tooth is main topic. So that, in case of currently developed worm wheel, because core and mold base are not developed in the first procedure, gear is machining in hobbing M/C as the second procedure. In the later, patent for mold base structure will be prepared in this study results.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.32 no.6
• /
• pp.251-261
• /
• 2022

This paper describes the finite element analysis and die design change of spring retainer forging process to reduce the cold forging load and plastic forming stress concentration. Plastic deformation analysis was carried out in order to understand the forming process of workpieces and elastic stress analysis of the die set was performed in order to get basic data for the die fatigue life estimation. Cold forging die design was set up to each process with different four types analysis progressing, the upper and lower dies shapes with combination of fillets and chamfers shapes of cold forging dies. This study suggested optimal cold forging die geometry to reduce cold forging load. The design parameters of fillets and chamfers are selected geometry were selected to apply optimization with the DoE (design of experiment) and Taguchi method. DoE and Taguchi method was performed to optimize the workpiece preform shape for spring retainer forging process, it was possible to expect an increase in cold forging die life due to the 20 percentage forging load reduction.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.3
• /
• pp.1051-1057
• /
• 2011

By the recently developed GMP(Glass Molding Press) process, aspheric glass lenses are widely used in many optical applications such as digital cameras, optical data storages and electrical devices etc. The GMP process can economically produce complex shaped glass lenses with high precision and good repeatability. This study deals the optimization of molding conditions for aspheric glass lenses in progressive GMP process through Design Of Experiment(Taguchi method). Tree main factors for molding conditions were selected based on pressure, temperature and cooling time at 1st cooling stage. From the analysis of experiments which were preformed with 3-cavity glass mold, it was revealed that the cooling time was the most sensitive parameter for form accuracy(PV) in progressive GMP process.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.5 no.3
• /
• pp.223-226
• /
• 2004

Injection molding using plastic materials was expected to mass production of structure with nano pattern for low cost phase. The PDMS mold was produced easily and uniformly by using thermal embossing. Quartz master for embossing method was made using electron beam lithography it had 100-500 nm size of line and dot type. The PDMS mold was produced after a brief hardening process and the master removal. The results show that various patterns are successfully fabricated the nano scale.. The replicated mold would be useful a stamper fabrication for injection molding.

• Proceedings of the KAIS Fall Conference
• /
• 2009.05a
• /
• pp.525-527
• /
• 2009

본 논문에서는 자동차 공조부품인 리시버드라이어로서 플랜지와 바디로 구성되어 있다. 리시버드라이어는 냉매 중 포함된 습기 및 기타 불순물을 차단하는 부품으로서 사이트글라스가 부착되어 냉매의 흐름의 상태를 알 수 있다. 또한 압력 밸브가 부착되어 있어 냉매 회로의 압력과 온도가 상승하면 녹아서 냉매를 배출하므로 배관이나 부품들의 압력에 의해서 파괴되는 것을 방지 할 수 있다. 최근 경제적 성형에 관심이 많아 대표적 성형공정인 냉간단조를 적용하여 소재 회수율 및 절삭 비용 등을 절감하는데 목적을 두었다. 냉간단조를 적용하여 자동차 공조 부품인 플랜지와 바디를 개발하는데 공정설계, 금형설계, 금형제작 기술을 확보하였다.

• Proceedings of the KAIS Fall Conference
• /
• 2001.05a
• /
• pp.298-299
• /
• 2001

안경렌즈는 유리를 연마하여 제작하거나 단량체를 세라믹 금형에 넣어 캐스팅공법으로 플라스틱 렌즈를 만드는 것이 일반적인 방법이었다. 한편 사출성형에 의한 렌즈 및 안경의 제작은 광학적으로 우수한 재료 및 금형을 개발하지 못하여 국내에서는 시도조차 못하는 형편이다. 구미나 유럽의 일부 국가는 PMMA 및 PC를 이용하여 안경 및 안경렌즈를 개발하고 있으며, 이는 공정을 대폭 줄이기 때문에 대량 생산 및 원가 절감을 이룩할 수 있다. 본 연구에서는 PMMA 및 PC를 이용하여 그동안 성형할 때에 가장 문제가 되었던 오목 렌즈를 제작하기 위한 근본적인 금형 설계의 문제점 해결과 이를 이용한 일체형 안경과 고강도 렌즈의 제작을 고찰하였다.