• 대한후두음성언어의학회지
• /
• 제20권2호
• /
• pp.131-135
• /
• 2009

Background and Objectives: Benign vocal fold lesions have shown various voice onset types on phonation, however, they have not been documented yet. We studied to know the relationships between benign vocal fold lesions and voice onset types. Materials and Method: 114 subjects were evaluated by using videokymographic examinations. The subjects were classified into three types: normal, contact, and open types according to the patterns of voice onset types on phonation. Benign vocal fold lesions were investigated and voice onset types were compared between normal and disease groups. Voice parameters were obtained from and compared in all subjects to assess acoustic and aerodynamic factors. Results: The normal type among onset types were more than contact type or open type in both normal and disease groups. Disease group showed many contact and open types when. compared with normal group. Vocal nodule and vocal polyp were showed many normal and contact types, however, sulcus vocalis was almost showed open type among voice onset groups. The values of mean flow rate (MFR) of contact type were significantly higher compared to normal type in disease group (p<0.05). Shimmer of contact type was higher than normal type in diseasegroup, but the difference was not significant (p=0.057). Conclusion: Benign vocal fold lesions were related to the various types of voice onset. The various types of voice onset should be considered when benign vocal fold lesions were examined.

• 디지털콘텐츠학회 논문지
• /
• 제18권4호
• /
• pp.699-706
• /
• 2017

근육 주사 후 진동과 압력을 이용한 마사지기구와 손마사지를 환자에게 제공 하여 주사 후 통증과 통증지속시간에 미치는 효과를 비교 검증하는 것이다. 연구의 방법은 비동등성대조군 유사 실험 설계 이다. 실험 결과 실험군이 대조군보다 통증점수가 더 낮았고(t= 7.40, p =.001), 통증 지속시간도 더 짧았다(t= 5.25, p=.001). 실험을 통하여 근육 주사 후 손마사지 방법보다 진동과 압력을 이용한 마사지기를 적용하는 것이 환자의 통증 및 통증 지속시간을 감소시킬 수 있음을 보여주었다. 따라서 근육주사 후 진동과 압력을 이용한 마사지기를 적용하는 것이 환자의 안위 증진은 물론 간호사의 업무량 감소에도 긍정적인 영향을 줄 것으로 기대된다.

• 대한기관식도과학회:학술대회논문집
• /
• 대한기관식도과학회 1982년도 제16차 학술대회연제순서 및 초록
• /
• pp.11.2-12
• /
• 1982

최근 우리나라에 있어서도 후두미세수술의 발달로 음성외과 분야에 대한 관심이 높아졌으며 음성장애 환자의 진단 및 치료면에서도 괄목할 만한 발전을 가져왔다. 우리는 작금의 음성외래에서 진단되는 음성장애 환자중에서 특히 성대의 유리연(遊離緣)을 따라서 평행하는 선상(線狀)의 성대구 (聲帶溝)를 보게되는데 이와같이 성문의 폐쇄부전을 동반하는 성대구증 (Sulcus Vocalis)은 1901 년 Salvi에 의해서 처음으로 명명보고된 이래로 유럽과 일본등에서 다수 보고된 바있으나. 우리나라에서는 비교적 관심이 적었던 질환으로 그 뚜렷한 원인과 치료에 대해서는 아직도 정설이 없는 상태이다. 이에 본 교실에서는 1981년 5월부터 1982년 3월까지 본원 음성언어연구실로 내원한 성대구증환자 35예에 대하여 일련의 음성검사를 시행하여 약간의 치험을 고찰한 바 있기에 그 결과를 보고하는 바이다. 1 ) 발생 빈도는 음성 장애를 주소로 내원한 290 예의 환자 중 35예로써 약 12 %였다. 2) 발병연령은 10세 이하에서 19예 (54%)로 가장 많았으며 다음은 10대, 20대의 순이였다. 3 ) 발병연령은 대부분의 예에서 불명이었으나 4예에서는 홍역 후에, 3예에서는 심한 감기 후에 병발했으며, 2 예는 선천적인 것으로 사려되었다. 4) 예중 25예 (71 %)에서 양측성이었고, 좌,우 편측성인 경우가 각각 8예 (23 %), 및 2예 (6 %)였다. 5 ) 임상증상은 거의가 애성을 주소로 하고 있었으며 7 예에서는 만성후두염을 동반하고 있었다. 6 ) 공기역학적검사에서는 20 예(57 %)에 서 최대발성지속시간 (Maximal Phonation time)이 감소되어 있었고, 발성율(發聲率, Phonation Quotient)은 22예(63 %)에서 증가되었으며, 발성시평균호기유율(Mean Air Flow Rate)은 23예 (66 %)에서 증가되었다. 7 ) 스트로보스코피(Stroboscopy) 를 시행할 수 있었던 33예 중 31예 (93%)에서 성문폐쇄부전 (glottic chink)이 있었으며 양측성대의 진동성은 거의 전례에서 규칙적 (regular)이었고, 4예(12 %)에서 비대칭(asymmetric)이었으며, 진폭 (amplitude) 은 5 예 (21 %)에서 감소되었으며, 점막파동(mucosal wave) 은 24 예 (73 %)에서 감소되었다. 8) 치료로서 상기 환자중 5예에서 성대내 테프론(Teflon) 주입을 실시하였고 1예에서 성대구절제술(Sulcusectomy)를 실시하였는데 테프론을 주입한 1예에서 증상의 호전이 있었을 뿐 다른 예에서는 효과가 뚜렷치 않아서 앞으로의 원격성적이 요망되었다.

• 대한후두음성언어의학회지
• /
• 제14권1호
• /
• pp.16-25
• /
• 2003

후두암은 유병율이 높지만 조기에 발견하면 90% 이상의 치유율과 발성기능의 보존이 가능하며 현재 음성분석을 이용한 진단법이 시도되고 있으나 정립된 선별검사법은 없는 실정이다. 성문전도검사(electroglottography, EGG)는 성대의 진동양상을 알 수 있는 비침습적 검사로서 발성과 음성합성의 연구에 많이 사용되고 있다. 본 연구는 EGG에서 관찰되는 파라미터들을 다층 퍼셉트론(multilayer perceptron)구조의 신경회로망(artificial neural network)으로 감별하는 기법을 이용하여 후두암 감별법에 대한 연구로서 부산대학교병원을 내원한 후두암 환자 10명과 양성후두질환 26명을 대상으로 새로 고안한 Electroglottograph(v1.0)를 이용하여 검사하고 이의 임상적 유용성을 평가하였다. EGG 파라미터인 closed quotient(CQ), speed quotient(SQ), speed index(SI), fundamental frequency(F0), Jitter, Shimmer 등은 MATLAB 6.5 (Mathwork, Inc.)로 작성한 분석 프로그램을 이용하여 추출하였다. 각 환자에서 추출된 EGG 파라미터들을 다층 퍼셉트론 구조의 신경회로망으로 감별하였다. CQ는 각 질환군 간에 유의한 차이가 없었지만 SQ, SI, Jitter, Shimmer 등은 성대질환의 특성에 따라 유의한 차이를 보였다. 신경회로망에서 감별한 결과 CQ를 제외한 SQ, SI, Jitter, Shimmer 등에서 71.3-90%의 후두암의 감별율을 보였다. 또한 SQ, SI, Jitter, Shimmer를 3개씩 조합한 실험에서는 SQ-Jitter-Shimmer와 SQ-SI-Shimmer의 후두암의 감별율이 93%로 가장 높았고, SQ-SI-Jitter 90.9%, SI-Jitter-Shimmer 88.6%로 전체적으로 85% 이상의 높은 감별율을 나타내었다. 이러한 결과는 EGG검사와 신경회로망을 이용한 양성과 악성 후두질환의 감별이 가능함을 시사한다. 향후 성대 질환의 병태생리를 대변할 수 있는 파라미터가 추가로 개발되고 분류 알고리듬이 개선된다면 EGG를 이용한 성대질환의 감별 진단이 보다 정확해질 것으로 사료되었다.

• 한국소음진동공학회논문집
• /
• 제14권2호
• /
• pp.128-135
• /
• 2004

Generally, heavy electronic products undergo many different types of shocks in transportation from a manufacturer to customers. Cushioning package is used to protect electronic products from severe shock environments. Since the mass distribution of heavy electronic products is usually unbalanced and complex. it is very difficult to design a cushioning package with having high performance by considering only the equivalent stiffness of that. Therefore, when designing the cushioning package for a heavy electronic product, it is necessary to optimize its shape in order to maximize the cushioning performance. In this study, it is focused on designing an optimal shape of cushioning package for a large refrigerator and an efficient design method is suggested by using a dynamic finite element analysis. As the results of this study the optimal shape of cushioning package, which has high cushioning performance and minimized volume, was obtained through the mechanical drop analysis and a optimization process. Through free drop tests of refrigerators, it was identified that the cushioning performance of the cushioning package was improved up by 25% and the its own volume was reduced by 22 ％.

• 한국기계가공학회지
• /
• 제4권1호
• /
• pp.37-42
• /
• 2005

The localization of manufacturing technique development is actualizing for low cost with supplies of display devices. We need more high cutting technique because consumers want flat glasses of various sizes. Recently, most general two methods are normal wheel cutting and laser cutting, but both of them have some faults. First, the wheel cutting has cracks and sharp edges of sections. Second, it is easy for laser cutting to cut curved lines. however, it has thermal damage and low traverse speed. I suggest a new cutting method by high-wave frequency vibration wheel cutting(HFVC), which is good for quality improvement. Vertical cracks and crack depth is observed, after HFVC. When the average of the crack depth is $30{\mu}m$ and the average of the wallner liner depth is $200{\mu}m$, it has the most high quality of the sections in this experiment. As a result, when we consider between the normal wheel cutting method and the HFVC method, the latter has low cracks and good quality.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2003년도 추계학술대회논문집
• /
• pp.677-683
• /
• 2003

Generally, heavy electronic products undergo many different types of shocks in transporting from a manufacturer to customers. Cushioning package materials are used to protect electronic products from severe shock environments. Since the mass distributions of heavy electronic products are usually unbalanced and complex, it is very difficult to design a cushioning package with haying high performance by considering only the equivalent stiffness of that. Therefore, when designing the cushioning material for a heavy electronic product, it is necessary to optimize its shape in order to maximize the cushioning performance. In this study, it is focused on designing an optimal shape of cushioning material for a large-sized refrigerator and an efficient design method is suggested by using a dynamic finite element analysis. As the results of this study, the optimal shape of cushioning material, which has high cushioning performance and minimized volume, was obtained from the drop analysis and a optimization process. From free drop tests of a refrigerator, it was identified that the cushioning performance of the optimal package were improved up to 16 % and the volume of it was reduced in a range of 22 %.

• Tribology and Lubricants
• /
• 제35권1호
• /
• pp.71-76
• /
• 2019

The differential planetary gear reducer as a main component of the concrete mixer driving mechanism requires a strong torque to mix concrete compounds. As this component is currently dependent on imports, it is necessary to develop it by conducting a study on vibration analysis and the resonance problem. The noise and vibration of a concrete mixer reducer increase owing to the transmission error of planetary gears, and the damage of components occurs owing to the problems in design and production. In this study, the tooth-passing frequency is calculated to evaluate the noise and vibration of a mixer reducer, and a fast Fourier transform (FFT) analysis is conducted through a vibration test using an acceleration sensor. The vibration of the reducer is measured at three points of input and output of the shaft and planetary gear housing with fixed and variable revolutions per minute. The operating conditions of gears and bearings are evaluated by performing the FFT analysis, and the resonance problem is verified. The results show that No. 1 pinion and ring gears revolve disproportionately. The amplitude values appear high, and the wear of tooth faces occur in tooth-passing frequencies and harmonic components of No. 1 and No. 2 pinion-ring gears. Therefore, we conclude that design changes in the reducer and a correction of tooth profiles are required.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 춘계학술대회 논문집
• /
• pp.438-441
• /
• 2002

Today, it is concentrating on automation and these appearance of industrial robot has been dealing flexibly with this field. If it is drilling through these industrial robot, it will be a high efficiency of the productivity. Therefore, electric drill is setting on articulated robot with six degree of freedom and the 5 face is drilling as the type of articulated robot by a machine object setting. This study was carried out to get the possibility about drilling as analyzing with experimental frequency, original vibration of robot and appearance of vibration when it is practical drilling.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2001년도 춘계학술대회 논문집
• /
• pp.475-478
• /
• 2001

This study is to examine the safety by analizing the hardness of bed and the characteristic of vibration to improve basic efficiency of machine-tool of drill-cell which is a high line center. The mistake of existing design was shown through the analysis of 3-D and structure. The purpose of this study is to prevent from a problem which may happen after this and to produce more reliable machine-tool by carrying out and finding out an adequate countermeasure for bed at the cutting position.