• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.38 no.12
• /
• pp.49-57
• /
• 2001

In this paper, equivalent circuit model and novel model parameter extraction method of a silicon(Si) substrate are presented. Substrate coupling through Si-substrate is quantitatively investigated by analyzing equivalent circuit with operating frequency and characteristic frequencies (i.e., pole and zero frequency) of a system. For the experimental verification of the equivalent circuit and parameter extraction method, test patterns are designed and fabricated in standard CMOS technology with various isolation distances, substrate resistivity, and guard-ring structures. Then, these are measured in l00MHz-20GHz frequency range by using vector network analyzer. It is shown that the equivalent-circuit-based HSPICE simulation results using extracted parameters have excellent agreement with the experimental results. Thus, the proposed equivalent circuit and parameter extraction methodology can be usefully employed in mixed-signal circuit design and verification of a circuit performance.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.17 no.12 s.115
• /
• pp.1224-1230
• /
• 2006

In this paper, for spatial multiplexing with limited feedback, a precoding scheme is proposed based on the joint use of minimal instantaneous feedback and long-term feedback of a small number of bits, wherein the long-term feedback is used to convey a selected preceding matrix within a precodercodebook consisting of a number of unitary matrices, and the active column vectors of the selected unitary matrix are conveyed to the transmitter using instantaneous feedback. Focusing on the case of dual multi-input multi-output(MIMO) systems, precoder codebook design for maximizing the average throughput of a spatial multiplexing system with a zero-forcing(ZF) receiver is proposed. It is shown that the proposed scheme provides a considerable throughput enhancement over multi-mode antenna selection and multi-mode basis selection only with the additional long-yterm feedback of a small number of bits. For example, the throughput increases by 11.5 % than antenna selection and 5.1% than basis selection, respectively, when SNR=20 dB.

• Journal of Navigation and Port Research
• /
• v.28 no.1
• /
• pp.43-49
• /
• 2004

Defects inspection of commodities are very important with those design and manufacturing process and essential to strengthen the competitiveness of those. If on-line automatic defects detection is performed without damaging to products, the production cost shall be curtailed through the reducing man-power, economical management of Q.C(Quality Control). In this paper, it is suggested three spatial filtering methods which can extract the necessary information in case of defects being on the surface of object like iron plate. In addition, the dependence of filtering characteristics on parameters such as the pitch and width of slits is analyzed and the surface defect detection system is constructed. Several experiments were carried out for determining the adequate spatial filtering method through comparing and analyzing effects of parameters like defect's size and shape, intensity of light, noise of coherent source and slit number.

• Journal of KIISE:Computing Practices and Letters
• /
• v.14 no.3
• /
• pp.276-280
• /
• 2008

Many dissemination protocols on the mobility support in wireless sensor networks have been designed based on the assumption that the movement trace of sinks, such as soldiers and fire fighters, is random. However, the mobility of the sinks in many applications, for example, the movement trace of a soldier on operation in a battle field, can be determined in advance. In this paper, we propose a Predictable Mobility-based Data Dissemination protocol that enables data to directly route from source nodes to moving sinks by taking into consideration predictable movement behavior of the sinks. We also show the superiority of the predictable mobility-based data dissemination protocol through the performance comparison with the random mobility-based data dissemination protocols.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.35 no.11
• /
• pp.1383-1389
• /
• 2011

Gerotor-type volumetric displacement pumps are suitable for oil or water hydraulics. For this reason, many researchers have studied this topic. Gerotor pumps have been widely used in various fields. In this study, we designed a rotor profile based on an envelope of a family of curves. An analytic method for determining the volumetric displacement of the gerotor pump is verified by comparing a result obtained using CAD technology and an experimental result. Throughout the experiment, the flow rate performance was verified. In addition, we describe the design and volumetric displacement characteristics of the gerotor pump.

• Journal of Fashion Business
• /
• v.16 no.1
• /
• pp.52-68
• /
• 2012

To achieve the aim of this study, 9 different types of samples were made to examine mechanical property according to structured pattern and type of Machi of pullover armhole of WholeGarment(seamless knitwear). With respect to samples, from which comparisons are made and anaylzed among basic characteristics of material, tensile strength & elongation and residual elongation due to repeated extension of armhole connecting part, the following conclusions could be obtained. It's revealed that the tensile strength of Machi part as being armhole connecting part of samples is more affected by Machi type than pattern structure. Of Machi types, it showed stronger tensile strength in the order of Normal(Normal Machi)< Machi_B(unilateral Machi)

• Proceedings of the Korean Information Science Society Conference
• /
• 2006.10d
• /
• pp.263-267
• /
• 2006

OFDM(A) 기반 네트워크는 IEEE 802.16e 시스템 및 WiBro 시스템 등으로 구현되고 있으며, 4G 시스템과 같은 차세대 이동통신 시스템의 기반 기술로서 많이 연구되고 있는 시스템이다. 이와 같은 OFDM(A) 시스템을 기반으로 IP 네트워크를 구축하게 된다면, 단말의 핸드오버를 지원하기 위하여 MAC 및 IP 계층에서의 핸드오버 기법에 대한 정의가 필요하다. IP 네트워크의 가장 큰 특징은 CDMA와 같은 서킷 네트워크가 아니라 패킷 네트워크라는 것이다. 이러한 패킷기반 네트워크에서의 소프트 핸드오버 기법은 CDMA 네트워크에서 제공되고 있는 소프트 핸드오버 기법을 그대로 적용할 수 없다. CDMA 소프트 핸드오버 기법은 물리계층에서의 신호 결합을 수행하게 되는데 패킷 네트워크에서 두 기지국으로부터 전송되는 패킷은 MAC 및 IP 헤더를 가지게 되고, 헤더에 포함되는 정보는 각 기지국에서 서로 다르게 전송하므로 물리계층에서의 신호 결합을 수행할 수가 없다. 본 논문에서는 기존에 제안된 소프트 핸드오버 기법의 단점을 보완하고 IP 기반 네트워크에 적용 가능한 소프트 핸드오버 기법을 제안한다. 제안하는 소프트 핸드오버 기법은 패킷 네트워크의 특성을 반영하여 소프트 핸드오버에 참여하는 기지국이 서로 다른 패킷을 전송하도록 디자인하였고, 에러 발생률을 낮추기 위하여 AMC (Adaptive Modulation and Coding) 기법을 적용하였다. 또한 OFDM(A) 시스템의 multi-carrier 특성을 이용하여 네트워크 자원을 효율적으로 사용함으로써 네트워크의 전체적인 성능 향상이 가능하도록 개발되었다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.4A
• /
• pp.377-384
• /
• 2006

According to fast VoIP technology development, more and more companies change voice network into IP based network among branch offices. IP PBX, which is deployed up to now, composed of IP phone and VoIP Gateway. Every telphone has replaced with If phone which support VoIP and VoIP gateway is installed in PBTN connection point to relay voice data. It can reduce the communication expense of International call, long distance call and call between a headquater and a trance because it uses internet line. In this paper, IP PBX is implemented that can distribute call using PBX network only usig personal terminal without Proxy Server. Depending on Role, terminal can be registered Master, Server and Client and it is verified in terms of performance and validation.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.18 no.3 s.118
• /
• pp.298-304
• /
• 2007

In this paper, the antenna which has a multiband operation (GSM850, EGSM, DCS1800, USPCS, W-CDMA) is proposed. This antenna was designed by the commercial software HFSS 3-D EM simulator, and it is organized by using a meander branch structure which has a via and lines on FR-4$(\varepsilon_r=4.4)$ substrate. Especially, it has a gap feeding structure which makes good operation at overall bandwidth. The designed antenna is manufactured by PCB processing, and measured by using a network analyzer and a test chamber. The manufactured antenna with the dimension of 8 mm width, 20 mm height and 3.2 mm thickness is able to applied as an internal antenna for multiband mobile phones.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.15 no.3
• /
• pp.375-381
• /
• 2005

Usually genetic algorithms are used to design optimal system. However the performance of the algorithm is determined by the fitness function and the system environment. It is expected that a co-evolutionary algorithm, two populations are constantly interact and co-evolve, is one of the solution to overcome these problems. In this paper we propose three types of co-evolutionary algorithm to solve GA-Hard problem. The first model is a competitive co-evolutionary algorithm that solution and environment are competitively co-evolve. This model can prevent the solution from falling in local optima because the environment are also evolve according to the evolution of the solution. The second algorithm is schema co-evolutionary algorithm that has host population and parasite (schema) population. Schema population supply good schema to host population in this algorithm. The third is game model-based co-evolutionary algorithm that two populations are co-evolve through game. Each algorithm is applied to visual servoing, robot navigation, and multi-objective optimization problem to verify the effectiveness of the proposed algorithms.