• Journal of the Korean Society of Marine Environment & Safety
• /
• v.28 no.6
• /
• pp.965-972
• /
• 2022

This is a basic study to establish marine activity criteria based on the seakeeping performance of less than 10-tons fishing vessels. These vessels account for approximately 95% of Korea's currently registered fishing vessels, and accidents and loss of life are also occurring during marine activities such as navigation, and fishing. Accordingly, the Ministry of Oceans and Fisheries has set a regulation of vessel traf ic control to restrict the operation of fishing vessels when the high seas watch takes effect, but it is applied equally without criteria according to the ship ton level and wave height; therefore, many differences may exist in ship fluctuations. Because the fluctuation of the ship owing to the wave height can be a factor in marine accidents by reducing the sense of boarding and performance of equipment, the seakeeping performance must be reviewed during waves to secure safe marine activities such as navigation and fishing. However, the review for the fishing vessel of established marine activity criteria based on the seakeeping performance is insufficient. Accordingly, the seakeeping performance was evaluated for a 10-ton class (G/T 9.77 tons) fishing vessel in Korea, and the level of marine activity according to the significant wave height and ship speed was interpreted by applying the operation and survival of the established seakeeping performance criteria. The analysis results indicated that the roll of the ship exceeded the operation criteria from 0.4m and the survival criteria from 2.2m. The pitch of the ship exceeded the operation criteria from 1.7m and did not exceed the survival criteria until 3.0m. However, the rolling exceeding the survival criteria from 2.2m may not be safe. Therefore, fishing vessels with less than 10-tons can leave before the high seas watch takes effect. However, they did not satisfy the criteria for evaluating the performance of the sea in relation to marine activities. Although this study was limitedly evaluated for 10-ton fishing vessels, it is expected to be of great help in preparing marine activity criteria.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.5D
• /
• pp.703-708
• /
• 2006

In the United States and Japan ITS device performance test-beds have been widely developed to enhance the reliability of traffic information and to expedite the standardization of components for securing the compatibility of device. In this study the selection criteria for developing ITS device performance test-bed are investigated by analyzing the cases and studies of overseas. Based on the criteria, a test-bed is developed and test-run. The importance of developing ITS device performance test-bed was identified as the result of reviewing the test run of each selection.

• Journal of Korea Ship Safrty Technology Authority
• /
• no.7 s.25
• /
• pp.21-38
• /
• 2008

본 연구는 배의길이 24미터이상 40미터미만 어선에 대한 국내 복원성기준과 IMO의 IS Code 기준 및 외국의 기준을 조사하고 비교하여 IS Code 기준의 국내 수용 가능성을 검토하고 그 결과를 토대로 하여 국내실정에 적합한 복원성기준을 마련하는 것을 목적으로 한다. 따라서 국내외 어선의 L, B, D 분포, 상관관계 및 선형특성 등의 기초 자료를 조사하고, 우리나라, 미국, 영국 등 선진외국 및 IS Code의 어선복원성기준 비교 검토하여 IS Code의 복원성기준의 각 항목(요건)에 따른 차이점과 수용 시 문제점을 도출하였으며, 국내 어선의 업종별 실선자료 수집 및 적하상태의 복원성능 계산, 국내·외 기준을 적용한 업종별 실선의 복원성능 평가를 실시하였다. 이러한 연구 결과를 토대로 국내실정을 고려한 배의길이 24미터이상 40미터미만 어선 복원성기준(안)을 제안하였다.

• 월간 기계설비
• /
• s.268
• /
• pp.63-63
• /
• 2012

국토해양부는 현행 20%인 신축 공동주택의 에너지 의무절감률을 30%로 상향 조정하는 내용을 골자로 하는 '친환경 주택의 건설기준 및 성능' 고시를 일부 개정해 11월 1일부터 시행에 들어간다.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.35 no.1
• /
• pp.63-76
• /
• 2015

The purpose of this study is to suggest performance levels, a test method, and assessment criteria for the performance assessment to allow standardized tests for rockfall protection systems. The range of rockfall impact energy was determined by using domestic rockfall data and a total of 9 performance levels from 50kJ to 1500kJ were suggested. The performance assessment is implemented by two types of full-scale free-fall impact tests to investigate the serviceability and the maximum capacity as in European and American standards. It was considered to be reasonable that the specimens of rockfall protection systems consist of 3 spans and the concrete block of a polyhedron with 26 faces, similar to spheres, impacts at the center of a center span. Assessment criteria were constructed to investigate whether a rockfall penetrated rockfall protection systems and whether the deformed specimen encroached on the roadway or obstructed the vehicle traffic.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.13 no.5
• /
• pp.11-20
• /
• 2014

Due to the importance of vehicle detector which plays an essential role in generating real-life traffic information, maintaining detector data quality is preeminent in advanced traffic management and information systems (ATMIS). To this end, agencies periodically conduct performance tests on detectors. Detector evaluation is generally performed by comparing baseline data with corresponding detector data. Here, two important things need to be addressed; one is errors (or uncertainties) included in baseline data and the other is the confidence interval concept to represent evaluation results of sample data to corresponding ones of population. To resolve these problems, a new detector evaluation scheme is introduced and the scheme is applied to individual level detector evaluations of loop, video image, and radar detectors. The purpose of individual level evaluation is to eliminate the balancing (or cancelling-out) effects of over- and under-counts. As a consequence, the proposed scheme is proven to be effectively applied to real-world detector evaluations.

• The KIPS Transactions:PartC
• /
• v.10C no.1
• /
• pp.103-110
• /
• 2003

In this paper, we propose and evaluate the performance distance-based registration considering call arrival. We propose the mobility model, which can be used to analyze the performance of proposed registration schemes. Numerical results show that zone-based registration needs less number of registration than distance-based registration. On the other hand, the registration load of the distance-based registration is equally distributed to all cells in a location area. However, the registration load of the distance-based registration considering cail arrival is similar to that of zone-based registration and equally distributed to all cells in a location area. Therefore, the proposed scheme can be effectively used restricted radio resources.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.17 no.5
• /
• pp.553-561
• /
• 2015

In this study, the performance assessment criterion for reasonable maintenance of shield TBM tunnel was presented. The performance assessment items such as crack, leakage, breakage, spalling, exfoliation/detachment, efflorescence, quality condition, exposure of steel, carbonation, faulting step, bolts condition, drainage condition, ground condition, contact section condition and conduit condition were selected by analyzing domestic and foreign performance assessment criterions and investigating segment lining deterioration cases through the site investigation and in-depth inspection analysis result on the shield TBM tunnel. In addition, the reasonable weight using AHP (Analytic Hierarchy Process) were estimated.

• Proceedings of the Korea Institute of Fire Science and Engineering Conference
• /
• 2011.11a
• /
• pp.103-106
• /
• 2011

국토해양부령 제320호인 건축물의 피난 방화구조 등의 기준에 관한 규칙 제 3조에서는 내화구조에 관한 세부기준을 정하고 있다. 이러한 법정내화구조 중에서 철골철망 모르타르조의 피복두께에 따른 내화성능 변화를 분석하기 위하여, 본 연구에서는 고온 재하하중조건에서 내화실험을 수행하였다. 철골조의 피복두께를 50 mm ${\cdot}$ 60 mm ${\cdot}$ 70 mm로 변화하여 내화실험을 수행하였으며, 재하하중비를 변화시킴으로 동일 피복두께에서의 내화성능 변화를 분석하고자 하였다. 실험결과 단면소성모멘트 대비 하중비 0.4 조건에서의 철골철망 모르타르조의 내화성능은 180분이 나왔으며, 피난 방화구조 등의 기준의 별표 1에서 정하고 있는 내화구조의 성능기준 중 최대 내화성능시간인 3시간을 확보하는 것으로 나타났다.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.12 no.2
• /
• pp.101-110
• /
• 2002

The purpose of this research is to establish Korean standards of best practice and common criteria for testing and evaluating the performance of biometric recognition systems. First of all, research activities in leading countries such as USA, Great Britain and Germany have been studied and analyzed. Then, the standards of best practice and common criteria are proposed in the aspects of sensors, algorithms, and application systems. The results of this work will be utilized fur test and evaluation of commercial biometric products by KISA and provided to private industries for their own evaluation of products.