• The Korean Journal of Rheology
• /
• v.11 no.2
• /
• pp.112-121
• /
• 1999

An MR(Magneto-Rheological) fluids damper is designed and applied to vibration suppression of a 1/4 car model. The damping constant of MR damper changes according to input current which is controlled in a semi-active way. Several control algorithms are compared in simulations and experiments. The advantage of the proposed Frequency shaped LQ control is that passenger comfort is emphasized in the range of 4~8Hz and driving safety is emphasized around the resonance frequency of unsprung mass.

• KIISE Transactions on Computing Practices
• /
• v.21 no.12
• /
• pp.792-797
• /
• 2015

Effective profiling diagnoses the failure of the system and informs risk. If a failure in the target system occurs, it is impossible to diagnose more than one of the exiting tools. In this respect, monitoring of the system based on virtualization is useful. We present in this paper a monitoring framework that uses the characteristics of hardware virtualization to prevent side-effects from a target guest, and uses dynamic binary instrumentation with instruction-level trapping based on hardware virtualization to achieve efficiency and flexibility. We also present examples of some applications that use this framework. The framework provides tracing of guest kernel function, memory dump, and debugging that uses GDB stub with GDB remote protocol. The experimental evaluation of our prototype shows that the monitoring framework incurs at most 2% write memory performance overhead for end users.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.12A
• /
• pp.1233-1241
• /
• 2008

We design, fabricate, and measure a MIMO antenna system mountable on a small PCB (such as UMPC). The proposed antenna system accommodates three radiation elements on the PCB area of $40mm\;{\times}\;100mm$. Two of them employ a slot type and one uses a modified monopole with an inverted L shape expecting high isolation and polarization purity. The bandwidth of each proposed MIMO antenna ranges from 80MHz and 200MHz at the center frequency of 1.8 GHz. The isolations between ports have been found to be greater than 10dB over the interested frequency band. Besides, the proposed MIMO system has been evaluated in terms of ARC(Active Reflection Coefficient, TARC(Total ARC), correlation, MEG, and etc. The envelope correlation is calculated to be much less than 0.04 and the ratio of the mean effective gain(MEG) between the antennas is found to be close to unity.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.26 no.11
• /
• pp.1672-1678
• /
• 2022

In this paper, the relay antenna was designed in consideration of the performance of the 28GHz band 5G mobile communication relay horn antenna, such as radiation pattern and return loss. A horn array for 5G mobile communication repeater was designed by arranging the antenna elements in phase, and the performance was analyzed. Unlike conventional WCDMA (3G) and LTE (4G), in millimeter wave band communication, high path loss occurs between transmission and reception. In the design of a 5G millimeter wave horn antenna, antenna performance such as isolation and gain between antenna elements as well as gain and bandwidth of the antenna must be additionally considered. The antenna gain of the single horn antenna (1×1) and the array horn antenna (2×4) in the 28GHz band is about 10.44d Bi and 19.58dBi, respectively, and the return loss is designed to be less than -18dB. It has proven its validity and has been shown to be suitable for application to 5G mobile communication relay system.

• Journal of the Korean Applied Science and Technology
• /
• v.33 no.1
• /
• pp.83-91
• /
• 2016

We studied the effect of battery deep cycle according to the way of active materials formation and the creation condition of electrode material, 3BS ($3PbO{\cdot}PbSO_4{\cdot}H_2O$) and 4BS ($4PbO{\cdot}PbSO_4$), in order to develop the batteries for Idle Stop & Go system. During the curing with active materials of anode and cathode, we found that the final creased active material was deformed by temperature control and it effects the durability of batteries. AGM battery and Flooded battery with 3BS active materials have excellent initial performance. And AGM battery with 4BS active materials shows the lower performance relatively. To compare and analyze of the formation efficiency of active materials, we tested the formation chagging steps with 3 steps and 9 steps differently. The results are that AGM battery with 4BS active materials is better on initial performance than AGM battery with 3BS. After the comparison of durability by DOD 17.5% life test, AGM battery is more suitable than flooded battery for the ISG system which needs the frequent deep cycle. In conclusion, AGM battery is the most suitable for ISG system and the life performance shows 80% difference according to the way of formation and curing of AGM batteries.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.26 no.8A
• /
• pp.1417-1427
• /
• 2001

본 논문에서는 밀리미터파를 이용하여 사용자에게 양방향 무선 멀티미디어의 구현을 가능케 하는 LMDS 송수신 모듈을 설계, 구현하였다. 제작된 LMDS 송수신 모듈은 신서사이져, 혼합기, 저잡음 증폭기, 고출력 증폭기, 듀플렉서 등으로 구성하였으며, 전체적으로는 전원부와 제어부를 통하여 이상여부를 감시하며, 송수신 모듈에 이상이 발생했을 때 이를 보호할 수 있도록 구현하였다. 여기서 DAVIC 표준에 맞도록 IF부 대역은 0.95∼1.45GHz의 500MHz 대역폭에서 동작하도록 제작하였고, 상하향 혼합기는 격리도 특성을 최대화하였으며, 이를 위해 하이브리드 링형을 이용한 다이오드 평형 구조를 적용하여 설계하였다. 혼합기로 주입되는 Local 주파수는 안정도가 높아야 함으로 유전체 공진형 발진기로 구현하였다. 또한 저잡음 증폭기와 고출력 증폭기는 정보통신부에서 공고한 3사 주파수 대역을 모두 수용할 수 있도록 24GHz∼26.5GHz의 대역에서 정상적인 동작을 할 수 있도록 설계하였으며, 특히 저잡음 증폭기는 잡음 환경에서 작은 신호를 손실 없이 얻을 수 있도록 잡음지수를 최소화하고, 30dB 이상의 충분한 이득이 구현되도록 하였다. 고출력 증폭기는 15dBm 이상의 출력을 송신하면서도 선형성에 문제가 없도록 혼변조왜곡(IMD) 특성을 고려하여 설계하였다. 그리고 듀플렉서는 우수한 주파수 선택도와 낮은 삽입손실 특성을 갖도록 송수신 필터 모두 5개의 공진기를 포함한 Chebyshev형 구조를 갖으며 생산성이 뛰어난 모노리딕형으로 구현하여, LMDS 송수신 성능을 구현하였다.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.21 no.3
• /
• pp.125-135
• /
• 2017

Various seismic isolation methods are being applied to bridges and buildings to improve their seismic performance. Most seismic isolation systems are the structural seismic isolation systems. In this study, the seismic performance of geotechnical seismic isolation system capable of isolating the lower foundation of the bridge structure from ground was evaluated. The geotechnical seismic isolation system was built with teflon, and the model structure was made by adopting the similitude law. The response acceleration for sinusoidal waves of various amplitudes and frequencies and seismic waves were analyzed by performing 1-G shaking table experiments. Fixed foundation, Sliding foundation, and Rocking foundation were evaluated. The results of this study indicated that the Teflon-type seismic foundation isolation system is effective in reducing the acceleration transmitted to the superstructure subject to large input ground motion. Response spectrum of the Rocking and Sliding foundation structures moves to the long period, while that of Fixed foundation moves to short period.

• Proceedings of the Korean Information Science Society Conference
• /
• 2011.06b
• /
• pp.401-404
• /
• 2011

운영체제와 같은 대규모 프로그램은 확장을 용이하게 하기 위해 장치 드라이버를 모듈 구조를 통해 동작시킨다. 그러나 이러한 드라이버 모듈은 커널과 분리되어 개발되기 때문에 상대적인 취약성을 가지고 있다. 이러한 취약성으로 인해 발생한 고장은 드라이버뿐만 아니라 커널 전체에 오류를 야기해 시스템의 안정성을 저하시키는 요인이 된다. 이러한 문제를 해결하기 위해 안전하지 않은 드라이버를 커널로부터 격리하고자 하는 논의가 진행되었고, 이후 많은 연구를 통해 여러 가지 접근 방식을 통한 해결방법이 제안되었다. 그러나 기존의 방법은 드라이버 소스코드의 수정이 필요하거나 드라이버 요청에 대한 응답속도가 매우 느린 현실적인 제약이 있었다. 본 논문에서는 기존방법의 한계를 극복하는 동적 컴파일러를 이용한 고장 분리 기법을 제안한다. 본 제안 기법은 기존 드라이버를 그대로 사용가능하며 기존 기법의 분리 정책을 모두 적용할 수 있다. 리눅스 커널에 본 제안기법을 적용하여 동적 컴파일러의 성능을 측정하고 본 제안 기법의 특성을 기존 기법과 비교함으로써 본 제안기법이 매우 적은 부하만으로 장치 드라이버의 고장 분리가 가능함을 확인하였다.

• The Journal of the Acoustical Society of Korea
• /
• v.13 no.3
• /
• pp.63-70
• /
• 1994

In this Paper, we propose a new codeword tying algorithm based on a tree structured classfier. The proposed algorithm which can be viewed as a kind of soft decision using statistical properties between codewords and states has an advantage of fast construction, and guarantees a unique optimal solution. Also, it can easily be applied to any speech recognition system based on discrete hidden Markov model (HMM). Experimental results on speaker-independent isolated word recognition show error reduction of $6\%$ for the codebook of size 256 and $9\%$ for 512 size and also HMM parameter reduction of about $20\%$.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.20 no.3
• /
• pp.43-51
• /
• 2020

In this paper, the design of 64 array antennas applied to RWP (Radar Wind Profiler) was described. The design point of the antenna is to ensure isolation between each element and to match the vertical / horizontal radiation pattern. To this end, a single element of the array antenna was proposed as a Bend dipole type, and through simulation, When sequentially sending 5 beams including vertical, the east/west/south/north direction was ±20°, and it was confirmed that no Grating Lobe occurred when steering the beam. The 64 array antenna proposed in this paper was designed with performance equal to or higher than that of overseas products, and was confirmed to be applicable to RWP.