• Korean Chemical Engineering Research
• /
• v.59 no.1
• /
• pp.6-10
• /
• 2021

The shorting resistance (SR) of the PEMFC(Proton Exchange Membrane Fuel Cell) polymer membrane is an important indicator of the durability of the membrane. When SR decreases, shorting current (SC) increases, reducing durability and performance. When SR becomes less than about 0.1 kΩ·㎠, shorting occurs, the temperature rises rapidly, and MEA(Membrane Electrode Assembly) is burned to end stack operation. In order to prevent shorting, we need to control the SR, so the conditions affecting the SR were studied. There were differences in the SR measurement methods, and the SR measurement method, which improved the DOE(Department of Energy) and NEDO(New Energy and Industrial Technology Development Organization) method, was presented. It was confirmed that the SR decreases as the relative humidity, temperature and cell compression pressure increase. In the final stage of the accelerated durability evaluation process of the polymer membrane, SR rapidly decreased to less than 0.1 kΩ·㎠, and the hydrogen permeability became higher than 15 mA/㎠. After dismantling the MEA, SEM(Scanning Electron Microscope) analysis showed that a lot of platinum was distributed inside the membrane.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.25 no.8
• /
• pp.1110-1116
• /
• 2021

In this paper, we propose a conformal Ku-band data link antenna to ensure low RCS of stealth UAV. As a phased array antenna with electrical beam steering function, a transmitter and a receiver were designed and manufactured for FDD communication, respectively. Each antenna is designed as a 12*12 planar array antenna and has a function to form a uni-directional pattern and a bi-directional pattern through phase control of unit elements. The beam steering range is designed to be able to steer up to 60 degrees in theta direction and 360 degrees in the phi direction. As a result of manufacturing and measurement, the conformal type radome has low transmission loss and meets the required specifications including system performance. The feasibility of mounting the stealth UAV has been confirmed, and future research directions such as interworking of baseband devices and conversion to digital beam steering function are suggested.

• The Journal of the Convergence on Culture Technology
• /
• v.8 no.2
• /
• pp.373-377
• /
• 2022

Wireless sensor networks are being used in various fields. Wireless sensor networks are applied in many areas, such as security, military detection, environmental management, industrial control, and home automation. There is a problem about the limit of energy that the sensor network basically has. In this paper, we propose the LEACH-CCBD (Low Energy Adaptive Clustering hierarchy - Centrailized with Cluster and Basestation Distance) algorithm that uses energy efficiently by improving network transmission based on LEACH-C among the representative routing protocols. The LEACH-CCBD algorithm is a method of assigning a cluster head to a cluster head by comparing the sum of the distance from the member node to the cluster distance and the distance from the cluster node to the base station with respect to the membership of the member nodes in the cluster when configuring the cluster. The proposed LEACH-CCBD used Matlab simulation to confirm the performance results for each protocol. As a result of the experiment, as the lifetime of the network increased, it was shown to be superior to the LEACH and LEACH-C algorithms.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.26 no.6
• /
• pp.943-948
• /
• 2022

Drones have been widely used in various fields due to the rapid development of done-related technologies, which causes various problems. The schemes which can track target drones by using signal transmitted by target drones have been investigated as a key technology for anti-drone systems to solve these problems. In this paper, we investigate an illegal drone tracking system based on swarming flight that consists of multiple small drones in order to resolve the limitations of a conventional system that consists of a single drone. In addition, we also propose a scheme with which we can adaptively adjust the separation distance between small drones in a swarm according to channel situations. We analyzed the performance of the proposed scheme in terms of success ratio and the number of movements. The proposed scheme can improve the success ratio and the number of movements by 170% and 63% respectively, compared to the conventional scheme.

• Composites Research
• /
• v.35 no.3
• /
• pp.175-181
• /
• 2022

Due to the increasing number of wireless communication devices in mmWave frequency bands, there is a high demand for electromagnetic interference (EMI) shielding and heat dissipating materials to avoid device malfunctions. This paper proposes an EMI shielding composite film with a high heat dissipation characteristic. To achieve this, a conductive grid is integrated with a polymer-based composite layer including magnetic and heat dissipating filler materials. A high shielding effectiveness (>40 dB), low reflection shielding effectiveness (<3 dB), high thermal conductivity (>10 W/m·K), thin thickness (<500 ㎛) are simultaneously achieved with a tailored design of composite layer compositions and grid geometries in 5G communication band of 26.5 GHz.

• Journal of the Microelectronics and Packaging Society
• /
• v.29 no.2
• /
• pp.121-127
• /
• 2022

Micro-LED is a light-emitting diode smaller than 100 ㎛ in size. It attracts much attention due to its superior performance, such as resolution, brightness, etc., and is considered for various applications like flexible display and VR/AR. Micro-LED display requires a mass transfer process to move micro-LED chips from a LED wafer to a target substrate. In this study, we proposed a vacuum chuck method as a mass transfer technique. The vacuum chuck was fabricated with MEMS technology and PDMS micro-mold process. The spin-coating approach using a dam structure successfully controlled the PDMS mold's thickness. The vacuum test using solder balls instead of micro-LED confirmed the vacuum chuck method as a mass transfer technique.

• Land and Housing Review
• /
• v.13 no.3
• /
• pp.107-113
• /
• 2022

With increasing airtight building construction aimed at reducing energy consumption, indoor relative humidity is increasing which can lead to condensation and moisture damage in multi-family residential buildings. This has led to increased implementation of mechanical ventilation to control indoor moisture. However mechanical ventilation systems consume additional energy and generate noise. As this leads to occupant discomfort, it is necessary to select a ventilation system that addresses the energy and noise issues. This research measured the ventilation performance, energy consumption, and noise level of mechanical ventilation devices in multi-family residential buildings. TOPSIS, a multi-criteria decision making technique was used to determine appropriate ventilation strategies in addition to occupant ventilation system operation preference.

• Journal of IKEEE
• /
• v.26 no.3
• /
• pp.380-388
• /
• 2022

The traditional malware detection technologies collect known malicious programs and analyze their characteristics. Then such a detection technology makes a blacklist based on the analyzed malicious characteristics and checks programs in the user's system based on the blacklist to determine whether each program is malware. However, such an approach can detect known malicious programs, but responding to unknown or variant malware is challenging. In addition, since such detection technologies generally monitor all programs in the system in real-time, there is a disadvantage that they can degrade the system performance. In order to solve such problems, various methods have been proposed to analyze major behaviors of malicious programs and to respond to them. The main characteristic of ransomware is to access and encrypt the user's file. So, a new approach is to produce the whitelist of programs installed in the user's system and allow the only programs listed on the whitelist to access the user's files. However, although it applies such an approach, attackers can still perform malicious behavior by performing a DLL(Dynamic-Link Library) injection attack on a regular program registered on the whitelist. This paper proposes a method to respond effectively to attacks using DLL injection.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.50 no.2
• /
• pp.93-101
• /
• 2022

It is essential to prevent LoC(Loss-of-Control) or upset situations caused by stall, icing or sensor malfunction in aircraft, because it may lead to the crash of the aircraft. With this regard, it is crucial to correctly identify the dynamic characteristics of aircraft in such upset conditions. In this paper, we present a SID(System IDentification) method utilizing the moving-window based least-square and the adaptive-order ZKF(Zonotopic Kalman Filter), which is more effective than the existing Kalman-filter based SID for the aircraft in upset condition at a high angle of attack with temporary sensor malfunction. The proposed method is then tested on real flight data and compared with the existing one.

• Journal of the Korean Wood Science and Technology
• /
• v.32 no.4
• /
• pp.46-51
• /
• 2004

The objective of this study was to evaluate the applicability of high temperature drying to pitch pine (Pinus rigida) lumber, especially intended for use as lamina of structural glued laminated timber (glulam), to enhance the efficient utilization and provide added-value to that species. The high temperature schedule and drying procedures utilized were shown to be reasonable for drying glulam lamina due to the occurrence of small moisture gradients, minimal residual drying stress, and low warpage. Through preliminary tests, it was confirmed that residual resin at lamina surfaces did not adversely affect the gluing process. However, quantitative analysis of resin is required for developing a method to constrain the occurrence of pitch trouble with respect to decreasing long-term adhesive and finish durability of glulam in use after manufacturing. The final moisture content of high temperature dried lamina was much lower than target moisture content and discoloration was more severe than anticipated. In a further study, it will be necessary to determine the optimal drying conditions, such as temperature, humidity, drying time, and top load restraint level, which could best control discoloration, warpage, and moisture content of the lamina, while minimizing fuel expense.