• The Journal of the Acoustical Society of Korea
• /
• v.27 no.7
• /
• pp.350-356
• /
• 2008

In this paper, we propose shading functions to the appropriate focused beamforming for near-field target estimation. This near field shading functions are based on Chebychev and Manning windows. In order to obtain the optimum sensor weighting values with the help of the proposed shading technique, we assume that the sensor positions associated to the non-uniformly distributed array are precisely known. We calculate a series of sensor weighting values from the FFT operation of given shading functions in time domain. By applying the shading weights on the sensor array, we can see that the level of sidelobe becomes diminished and the performance of estimating range and azimuth gets improved. In addition, we propose a non-uniform structure in terms of frequency bands, which may minimize the attenuation of incoming signals.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.29 no.4
• /
• pp.277-284
• /
• 2018

This paper reports the transparent electrode, which would be applied to transparent displays and smart glasses. Herein, a squared metal mesh with the most widely used copper wire in microwaves is studied for the alternating thin-film-type transparent and conducting indium tin oxide(ITO), with a low conductivity(sheet resistance > $5{\Omega}/sq.$). The electromagnetic performance of a patch antenna with metal mesh is analyzed. This paper presents the results of the optical(OT, optical transparent) and electrical(sheet resistance) characteristics of a squared metal mesh, which is a basic design. To improve the OT, copper wire(w=0.2 mm) is used in fabricating the squared metal mesh and the relationship between the OT and the antenna performance(radiation gain, radiation pattern) was analyzed according to the mesh size(l=1, 2 mm). The measurement results show that the antenna performance and the optical characteristic are in inverse proportion to each other. In real applications, the optical and electrical characteristics, and the costs of production are to be considered.

• Journal of KIISE:Computer Systems and Theory
• /
• v.36 no.5
• /
• pp.412-421
• /
• 2009

Due to the physical characteristics of NAND flash memory, overwrite operations are not permitted at the same location, and therefore erase operations are required prior to rewriting. These extra operations cause performance degradation of NAND flash memory file system. Since it also has an upper limit to the number of erase operations for a specific location, frequent erases should reduce the lifetime of NAND flash memory. These problems can be resolved by delaying write operations in order to improve I/O performance: however, it will lower the cache hit ratio. This paper proposes a policy of page management using double cache for NAND flash memory file system. Double cache consists of Real cache and Ghost cache to analyze page reference patterns. This policy attempts to delay write operations in Ghost cache to maintain the hit ratio in Real cache. It can also improve write performance by reducing the search time for dirty pages, since Ghost cache consists of Dirty and Clean list. We find that the hit ratio and I/O performance of our policy are improved by 20.57% and 20.59% in average, respectively, when comparing them with the existing policies. The number of write operations is also reduced by 30.75% in average, compared with of the existing policies.

• The Journal of the Acoustical Society of Korea
• /
• v.22 no.7
• /
• pp.519-527
• /
• 2003

Speech is much influenced by the existence of outliers which are introduced by such an unexpected happenings as additive background noise, change of speaker's utterance pattern and voice detection errors. These kinds of outliers may result in severe degradation of speaker recognition performance. In this paper, we proposed the GMM based on robust principal component analysis (RPCA-GMM) using M-estimation to solve the problems of both ouliers and high dimensionality of training feature vectors in speaker identification. Firstly, a new feature vector with reduced dimension is obtained by robust PCA obtained from M-estimation. The robust PCA transforms the original dimensional feature vector onto the reduced dimensional linear subspace that is spanned by the leading eigenvectors of the covariance matrix of feature vector. Secondly, the GMM with diagonal covariance matrix is obtained from these transformed feature vectors. We peformed speaker identification experiments to show the effectiveness of the proposed method. We compared the proposed method (RPCA-GMM) with transformed feature vectors to the PCA and the conventional GMM with diagonal matrix. Whenever the portion of outliers increases by every 2%, the proposed method maintains almost same speaker identification rate with 0.03% of little degradation, while the conventional GMM and the PCA shows much degradation of that by 0.65% and 0.55%, respectively This means that our method is more robust to the existence of outlier.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.20 no.2
• /
• pp.427-436
• /
• 2016

In general, QRS duration represent a distance of Q start and S end point. However, since criteria of QRS duration are vague and Q, S point is not detected accurately, arrhythmia classification performance can be reduced. In this paper, we propose extraction of Q, S start and end point RS feature based on phase transition tracking method after we detected R wave that is large peak of electrocardiogram(ECG) signal. For this purpose, we detected R wave, from noise-free ECG signal through the preprocessing method. Also, we classified QRS pattern through differentiation value of ECG signal and extracted Q, S start and end point by tracking direction and count of phase based on R wave. The performance of R wave detection is evaluated by using 48 record of MIT-BIH arrhythmia database. The achieved scores indicate the average detection rate of 99.60%. PVC classification is evaluated by using 9 record of MIT-BIH arrhythmia database that included over 30 premature ventricular contraction(PVC). The achieved scores indicate the average detection rate of 94.12% in PVC.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.44 no.1
• /
• pp.94-104
• /
• 2007

Iris recognition is biometric technology which uses a unique iris pattern of user in order to identify person. In the captured iris image by conventional iris recognition camera, it is often the case with eyelid occlusion, which covers iris information. The eyelids are unnecessary information that causes bad recognition performance, so this paper proposes robust algorithm in order to detect eyelid. This research has following three advantages compared to previous works. First, we remove the detected eyelash and specular reflection by linear interpolation method because they act as noise factors when locating eyelid. Second, we detect the candidate points of eyelid by using mask in limited eyelid searching area, which is determined by searching the cross position of eyelid and the outer boundary of iris. And our proposed algorithm detects eyelid by using parabolic hough transform based on the detected candidate points. Third, there have been many researches to detect eyelid, but they did not consider the rotation of eyelid in an iris image. Whereas, we consider the rotation factor in parabolic hough transform to overcome such problem. We tested our algorithm with CASIA Database. As the experimental results, the detection accuracy were 90.82% and 96.47% in case of detecting upper and lower eyelid, respectively.

• Journal of Convergence for Information Technology
• /
• v.12 no.2
• /
• pp.30-36
• /
• 2022

In this paper, when the lighting and communication functions of the visible light communication system are used at the same time, we propose a technique to reduce the dimming level and flicker of the lighting. Visible light communication must satisfy both communication and lighting performance. However, the existing data code method results in reducing the brightness of the entire lighting. This causes deterioration of lighting performance and flicker phenomenon. To solve this problem, in this paper, we propose an adaptive learning code allocation technique that allocates binary codes to transmitted characters and optimizes and matches the binary codes allocated according to the frequency of occurrence of alphabets in character strings. Through this, we studied a technique that can faithfully play the role of lighting as well as communication function by allocating codes so that the 'OFF' pattern does not occur continuously while maintaining the maximum dimming level of each character string. As a result of the performance evaluation, the frequency of occurrence of '1' increased significantly without significantly affecting the overall communication performance, and on the contrary, the frequency of consecutive '0' decreased, indicating that the lighting performance of the system was greatly improved.

• The KIPS Transactions:PartA
• /
• v.12A no.3 s.93
• /
• pp.205-214
• /
• 2005

Flash memory is at high speed used as storage of personal information utilities, ubiquitous computing environments, mobile phones, electronic goods, etc. This is because flash memory has the characteristics of low electronic power, non-volatile storage, high performance, physical stability, portability, and so on. However, differently from hard disks, it has a weak point that overwrites on already written block of flash memory is impossible to be done. In order to make an overwrite possible, an erase operation on the written block should be performed before the overwrite, which lowers the performance of flash memory highly. In order to solve this problem the flash memory controller maintains a system software module called the flash translation layer(FTL). Of many proposed FTL schemes, the log block buffer scheme is best known so far. This scheme uses a small number of log blocks of flash memory as a write buffer, which reduces the number of erase operations by overwrites, leading to good performance. However, this scheme shows a weakness of low page usability of log blocks. In this paper, we propose an enhanced log block buffer scheme, FAST(Full Associative Sector Translation), which improves the page usability of each log block by fully associating sectors to be written by overwrites to the entire log blocks. We also show that our FAST scheme outperforms the log block buffer scheme.

• Journal of Korea Multimedia Society
• /
• v.14 no.9
• /
• pp.1125-1137
• /
• 2011

Recently, there have been previous research about the iris recognition in mobile device to increase portability, whose accuracy is affected by the quality of iris image. Iris image is affected by illumination environment during the image acquisition. The existing system has high accuracy in indoor environment. However the accuracy is degraded in outdoor environment, because the gray levels of iris patterns in image are changed, and ghost and eyelash shading regions are produced by the sunlight of various wavelengths into iris region. To overcome these problems, we propose new mobile iris camera system which uses the near-infrared (NIR) light illuminator of 850 nm and band pass filter (BPF) of 850 nm. To measure the performance of the proposed system, we compared it to the existing one with the iris images captured in indoor and outdoor sunlight environments in terms of the equal error rates (EER) based on false acceptance rate (FAR) and false rejection rate (FRR). The experimental result showed that the proposed system had the lower EERs than those of previous system by 0.96% (with frontal light in indoors), 4.94% (with frontal light in outdoor), 9.24% (with side light in outdoor), and 7% (with back light in outdoor), respectively.

• Korean Chemical Engineering Research
• /
• v.56 no.2
• /
• pp.281-290
• /
• 2018

As the internal combustion engine vehicles of high fuel efficiency and low emission are demanded, it becomes important to procure technologies for improving low-temperature performance of automotive catalyst systems. In this study, we showed that the combustion rate of diesel particulate matter is greatly enhanced at low temperature by applying fuel-borne catalyst and perovskite catalyst concurrently. It was tried to examine the correlation between elemental composition of perovskite catalyst and combustion activity of mixed catalyst system. To achieve this goal, we applied temperature-programmed oxidation technique in testing the combustion behavior of perovskite-mixed particulate matter bed which contained the element of fuel-borne catalyst or not. We tried to explain the synergetic action of two catalyst components by comparing the trends of concentrations of carbon dioxide and nitrogen oxide in temperature-programmed oxidation results.