• Proceedings of the Acoustical Society of Korea Conference
• /
• 1998.06c
• /
• pp.209-212
• /
• 1998

소나나 레이다분야에서 목표물로부터 오는 신호의 산란점을 추정하는 것은 추정한 산란점 특성을 분석하여 목표물을 식별하기 위해서 연구되어 오고 있다. 지금까지 연구되어온 모델링에 의한 산란점 추정을 보면 많은 경우 Prony 모델에 근거하여 추정하고 있다. Prony 모델을 레이다나 소나에 적용할 때에 몇 가지 단점을 갖고 있다. 그 첫째는 Prony모델이 잡음에 약하다는 점이고 둘째는 Prony모델이 모델차수에 대한 사전정보를 요구한다는 점이다. 본 논문에서는 위에 든 단점중에서 잡음에 취약한 점을 보완하기 위해서 입력 신호 성분만을 자동 추적하는 창함수(Automatic Tracking Window)를 전처리기로 사용한 Prony 산란점 추정 방법을 제안한다. 또 그 성능을 기존 Prony방법만을 사용한 산란점 추정방법과 비교하여 잡음에 대한 성능 향상을 보였다.

• Proceedings of the KIEE Conference
• /
• 1999.11c
• /
• pp.600-602
• /
• 1999

원자력발전 비율이 증가함에 따라 전기에너지의 효율적인 이용과 원자력발전의 경쟁력 제고를 위하여 원자력발전소(이하 원전)의 부하추종운전 필요성이 점점 커지고 있다. G7과제의 하나로 개발되고 있는 차세대원자로(KNGR, Korean Next Generation Reactor)는 경쟁력 있는 원전의 설계를 위하여 "일일부하추종운전 능력의 확보"를 기본 성능요건의 하나로 하여 개발되고 있다. 그러나 수동으로 원자로출력분포를 제어하는 기존 원전의 제어방식으로는 상기목표를 충족시키기 어려워 원자로의 출력분포와 출력을 동시에 제어하는 새로운 자동 제어방식을 도입하였다. 본 논문에 기술된 제어방법은 원자로 출력분포 상태에 따른 비선형 제어방법이 적용되며 목표출력 부근에서의 Oscillatory Behavior 방지를 위해 설정된 Deadband 내에서의 다른 상태변수를 제어하기 위한 알고리즘도 포함된다. 개발된 제어방법의 성능을 확인하기 위해 원자로 증기공급계통 전체를 모델링한 성능분석 Simulator를 이용한 Numerical Simulation을 수행하였다. 일일부하추종운전은 100-50-100%P[$(10{\sim}16)-2-(10{\sim}4)-2$ hr] power cycle over a 24-hour period, 주파수제어는 일반적인 Grid Follow에 대해 Simulation하였다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2018.05a
• /
• pp.189-189
• /
• 2018

확률강우량은 수공구조물 설계, 목표강우량과 같은 방재성능목표 그리고 방재성능평가에 활용되는 기준으로 활용되고 있다. 과거 강우자료계열을 기반으로 통계분석 과정을 걸쳐 산정되는 확률강우량은 재현기간별 발생빈도에서 실제 발생한 강우량보다 과소 산정되는 문제점이 있다. 이에 본 연구에서는 강우자료를 최대치계열과 초과치계열로 구분하여 각각 확률강우량을 산정하고, 확률분포형별 확률강우량과 실제 강우량의 비교분석을 실시하였다. 또한, 실제 강우의 재현기간별 발생빈도를 기반으로 과소 추정되는 확률강우량의 문제점을 보완하는 산정방안을 제시하였다. 본 연구의 결과는 과소 추정되는 확률강우량의 문제점을 보완하여 적정 확률강우량 산정함으로써, 수공구조물 설계 및 방재성능평가에 기여할 것으로 판단된다.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.9
• /
• pp.2227-2232
• /
• 2013

To obtain the system requirement specification in the beginning of the precision guidance system development, the effectiveness and reliability analysis for the system are necessary. The main purpose of this research is to obtain the system requirement specification for the high speed unmanned underwater vehicles by carrying out the effectiveness analysis using the modeling and simulation scheme. The effectiveness is position error for target position. Reaching accuracy is expected to be affected by the navigation sensor parameter. Assume that the navigation sensors that is consist of inertial navigation system(INS) and doppler velocity log(DVL) is the parameter. To analyze the effectiveness of each parameter, Monte-Carlo numerical simulation is performed in this research. The effectiveness analysis is carried out using circular error probability(CEP) and variance analyze scheme. Considering the cost function, the specification of the navigation sensor is provided. The cost function is consist of the INS and DVL specification and the price of those sensors.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.6
• /
• pp.2441-2451
• /
• 2012

This paper presents the design of a control system for improving performance of a washer fluid heating system (WFHS) which is capable of removing frost, ice, snow and/or other debris from windshield. First, for the WFHS, a modeling process is described, and the extraction of characteristic parameters of the model are made by experimental studies. Design variables that affect on performance of the WFHS are also presented. Secondly, a control system is proposed for improving heating performance of the WFHS, and its performance is verified through experiments. The key feature of the proposed control system is to regulate the current of a booster converter input to the WFHS up to the target value that is set to guarantee heating performance. Target current is calculated by using initial temperature value and employing the mathematical model derived in the paper. Computer simulation and experimental results show that the proposed control system can perform heating operations in a way to satisfy per-determined target performance of the WFHS.

• The KIPS Transactions:PartA
• /
• v.9A no.4
• /
• pp.451-458
• /
• 2002

In this article, we present, design, and implement a software and hardware for an embedded RAID system. The merits and drawbacks of our system are presented by performance evaluation. The proposed hardware system consists of three fibre channel controllers for the interface with fibre channel disks and hosts. Embedded Linux in which a RAID software is implemented is ported to the hardware. A SCSI target mode device driver and a target mode SCSI module are designed for that our RAID system is considered as a block device to a host computer. Linux Multi-device is used as RAID functions of this system. A data cache module is implemented for high performance and the interconnection between Linux Multi-device and the target mode SCSI module. The RAID 5 module of Multi-device is modified for improvement of read performance. The benchmark shows that the new RAID 5 module is superior to the original one in overall performance.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.4C
• /
• pp.265-273
• /
• 2006

This study aims at evaluation of the fire resistance performance of cementitious materials for fire protection of tunnel. For this purpose, the research procedure was divided into three parts. First, base mix proportion with different material type were determined by fire test. Second, the fire test of cementitious materials for fire resistance were performed on base mix proportions to evaluated their performance. Third, the performance of cementitious materials for fire resistance compare to the target value and existing commercial products. If the performance of developed cemetitious materials for fire resistance were satisfied the target value, this studies were stopped. But, this research return to first process if the performance of cementitious materials for fire resistance are not satisfied the target value. As a result of this study, the spalling did not happen for develop and existing commercial product. Also, developed cementitious materials for fire resistance are shown with excellent compressive strength, flexural strength, and bond strength, because it used a height density aggregate. And developed cementitious materials has sufficient resistance for fire.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.13 no.3
• /
• pp.165-170
• /
• 2013

In spatial, desired target direction of arrival estimation is to find a incidental signal direction on receive antennas. In this paper, we were an estimation a desired target direction of arrival using maximum likelihood method. Direction of arrival estimation method estimated a desired target calculating the maximum likelihood sensitivity using singular value decomposition above threshold signals among receive signals in maximum likelihood method. Through simulation, we were analysis a performance to compare existing method and proposal method. In direction of arrival estimation, proposed method is effectivity to decrease processing time because it is not doing an eigen decomposition in direction of arrival estimation, and desired target correctly estimated. We showed that proposal method improve more target estimation than general method.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.39 no.11
• /
• pp.1013-1020
• /
• 2011

This paper deals with the tracking problem of a moving target using multiple unmanned aerial vehicles. A decentralized extended information filter is designed to cooperatively estimate the position and the velocity of the moving target. The extended information filter is adopted to consider the range and the line-of-sight angle as measurement data. The decentralized scheme is applied to enhance the estimation performance using the information provided by other vehicles. Numerical simulation is performed to verify the tracking performance of the proposed decentralized filters.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.43 no.4
• /
• pp.326-333
• /
• 2015

A turbo fan engine performance analysis program combined with a particle swarm optimization(PSO) has been developed to optimize the major design parameters of the combat aircraft gas turbine engine. The optimized parameters includes bypass ratio, fan pressure ratio, high pressure compression ratio and burner exit temperature. The objective parameters have been determined using a multi-objective function consisting of the net thrust and specific fuel consumption along a weight function. The basic model for the combat aircraft gas turbine engine has been selected as the F404 turbofan engine which is widely used in the combat aircraft, F-18 and Korean high level training aircraft, T-50. The optimal conditions of four parameters have been obtained for various design conditions.