• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.11 no.5
• /
• pp.796-805
• /
• 2000

A 30GHz band low noise amplifier module, which has linear gain of 30dB and noise figure of 2.6dB, for 30GHz satellite communication transponder was developed by use of MMIC and thin film MIC technologies. Two kinds of MMIC circuits were used for the low noise amplifier module, the first one is ultra low noise MMIC circuit and the other is wideband and high gain MMIC circuit. The pHEMT technology with 0.15$mu extrm{m}$ of gate length was applied for MMIC fabrication. Thin film microstrip lines on alumina substrate were used to interconnect two MMIC chips, and the thick film bias circuit board were developed to provide the stabilized DC bias. The input interface of the low noise amplifier module was designed with waveguide type to receive the signal from antenna directly, and the output port was adopted with K-type coaxial connector for interface with the frequency converter module behind the low noise amplifier module. Space qualified manufacturing processes were applied to manufacture and assemble the low noise amplifier module, and space qualification level of environment tests including thermal and vibration test were performed for it. The developed low noise amplifier was measured to show 30dB of minimum gain, $\pm$0.3dB of gain flatness, and 2.6dB of maximum noise figure over the desired operating frequency range from 30 to 31 GHz.

• Journal of Intelligence and Information Systems
• /
• v.19 no.4
• /
• pp.1-10
• /
• 2013

Personalization aims to provide customized contents to each user by using the user's personal preferences. In this sense, the core parts of personalization are regarded as recommendation technologies, which can recommend the proper contents or products to each user according to his/her preference. Prior studies have proposed novel recommendation technologies because they recognized the importance of recommender systems. Among several recommendation technologies, collaborative filtering (CF) has been actively studied and applied in real-world applications. The CF, however, often suffers sparsity or scalability problems. Prior research also recognized the importance of these two problems and therefore proposed many solutions. Many prior studies, however, suffered from problems, such as requiring additional time and cost for solving the limitations by utilizing additional information from other sources besides the existing user-item matrix. This study proposes a novel implicit rating approach for collaborative filtering in order to mitigate the sparsity problem as well as to enhance the performance of recommender systems. In this study, we propose the methods of reducing the sparsity problem through supplementing the user-item matrix based on the implicit rating approach, which measures the trust level among users via the existing user-item matrix. This study provides the preliminary experimental results for testing the usefulness of the proposed model.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.3 no.3
• /
• pp.517-531
• /
• 1999

This paper presents the development of the 2-mode variable gain high power amplifier for a transmitter of INMARSAT-M operating at L-band(1626.5-1646.5 MHz). This SSPA(Solid State Power Amplifier) is amplified 42 dBm in high power mode and 36 dBm in low power mode for INMARSAT-M. The allowable error sets +1 dBm of an upper limit and -2 dBm of a lower limit, respectively. To simplify the fabrication process, the whole system is designed by two parts composed of a driving amplifier and a high power amplifier, The HP's MGA-64135 and Motorola's MRF-6401 are used for driving amplifier, and the ERICSSON's PTE-10114 and PTF-10021 are used the high power amplifier. The SSPA was fabricated by the circuits of RF, temperature compensation and 2-mode gain control circuit in aluminum housing. The gain control method was proposed by controlling the voltage for the 2-mode. In addition, It has been experimentally verified that the gain is controlled for single tone signal as well as two tone signals. The realized SSPA has 42 dB and 36 dB for small signal gain within 20 MHz bandwidth, and the VSWR of input and output port is less than 1.5:1 The minimum value of the 1 dB compression point gets 5 dBm for 2-mode variable gain high power amplifier. A typical two tone intermodulation point has 32.5 dBc maximum which is single carrier backed off 3 dB from 1 dB compression point. The maximum output power of 43 dBm was achieved at the 1636.5 MHz. These results reveal a high power of 20 Watt, which was the design target.the design target.

• Korean Chemical Engineering Research
• /
• v.53 no.3
• /
• pp.357-363
• /
• 2015

The development of the environment-friendly tire that meets the standard requirements according to tire labeling system can be improved through using highly homogeneous silica immobilized zinc oxide nanoparticles. In this study, a considerable amount of nanoporous silica was essentially added into nano zinc oxide to improve the physiochemical properties of the formed composite. The introduction of nanoporous silica materials in the composite facilitates the improvement of the wear-resistance and increases the elasticity of the tread. Therefore, the introduction of nanoporous silica can replace carbon black as filler in the formation of composites with desirable properties for conventional green tire. Herein, mesoporous silica immobilized zinc oxide nanoparticle with desirable properties for rubber compounds was investigated. Composites with homogeneous dispersion were obtained in the absence of dispersants. The dispersion stability was controlled through varying the molar ratio, ageing time and mixing order of the reactants. A superior dispersion was achieved in the sample obtained using 0.03 mol of zinc precursor as it had the smallest grain size (50.5 nm) and then immobilized in silica aged for 10 days. Moreover, the specific surface area of this sample was the highest ($649m^2/g$).

• Journal of Service Research and Studies
• /
• v.10 no.2
• /
• pp.17-29
• /
• 2020

This study was performed to derive a modern service management model reflecting the philosophy of the new business administration. Service management as the modern business administration should be faithful to the spirit of modernity. In addition, service management must be faithful to the essence of service in service economy era. And since modern management is to manage organizations those are the central organizations of human society, it must be managed according to the common principles of the world. Management that satisfies these three management philosophy conditions is defined as modern service management. In this study, we analyzed that the existing service management framework does not meet these standards of modern management and derived an improved modern service management model. The modern service management model must be a management model that reflects the essence of intangible goods called service, it must be a management framework that reflects the modern spirit, and it must be a management model that reflects the common principles of the world required by the central organization of the modern economic society. Therefore, this study analyzed the modern spirit in addition to the service essence and the common principle of the world analyzed in the previous study, and presented a modern service management model with these three requirements. Also, examples of modern service management were presented. This study is a conceptual model, and analytical research is needed to demonstrate that this management model can consistently produce excellent management performance by strengthening empirical studies in the future.

• Journal of IKEEE
• /
• v.21 no.3
• /
• pp.268-271
• /
• 2017

In this paper, we propose the development of high resolution $360^{\circ}$ omnidirectional IP camera with 12 million pixels. The proposed 12-megapixel high-resolution $360^{\circ}$ omnidirectional IP camera consists of a lens unit with $360^{\circ}$ omnidirectional viewing angle and a 12-megapixel high-resolution IP camera unit. The lens section of $360^{\circ}$ omnidirectional viewing angle adopts the isochronous lens design method and the catadioptric facet production method to obtain the image without peripheral distortion which is inevitably generated in the fisheye lens. The 12 megapixel high-resolution IP camera unit consists of a CMOS sensor & ISP unit, a DSP unit, and an I / O unit, and converts the image input to the camera into a digital image to perform image distortion correction, image correction and image compression And then transmits it to the NVR (Network Video Recorder). In order to evaluate the performance of the proposed 12-megapixel high-resolution $360^{\circ}$ omnidirectional IP camera, 12.3 million pixel image efficiency, $360^{\circ}$ omnidirectional lens angle of view, and electromagnetic certification standard were measured.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.27 no.4
• /
• pp.289-296
• /
• 2014

The rebar detailing is an important work influencing the final performance and quality of RC structures. But it is one of the most irrational and illogical activity in construction site. Many groups of workers, including main contractors, structural engineers, shop drawers, rebar fabricators, and etc., participate in this activity. A loosely-organized process for this activity is apt to produce a big amount of rebar loss or even degraded structures. A 3-dimensional rebar auto-placing system, called as Rebar Hub, has been designed and implemented in this research. Rebar Hub provides a totally integrated service from 3D structural modeling of buildings to rebar auto-placing considering anchorage, splice, and the length of ordered rebar. In addition, Rebar Hub can recognize the 2D drawing CAD files and then build 3D structural models which are used for the start point of 3D rebar auto-placing. After rebar auto-placing, each members of the 3D structural model have rebar information belonging to them. It means that the rebar information can be used for the afterward works such as quantity-survey, manufacturing and fabrication of rebars. Rebar Hub is showing outstanding performance while applying to practical projects. It has almost five times productivity and reduces the rebar loss up to 3~8% of the initially-surveyed amount of rebar.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.26 no.1
• /
• pp.69-77
• /
• 2013

When structural design of a tall building is conducted, reduction of wind-induced lateral displacement is one of the most important problem. For this purpose, additional dampers and vibration control devices are generally considered. In this process, control performance of additional devices are usually investigated for optimal design without variation of characteristics of a structure. In this study, multi-objective integrated optimization of structure-smart control device is conducted and possibility of reduction of structural resources of a tall building with additional smart damping device has been investigated. To this end, a 60-story diagrid building structure is used as an example structure and artificial wind loads are used for evaluation of wind-induced responses. An MR damper is added to the conventional TMD to develop a smart TMD. Because dynamic responses and the amount of structural material and additional smart damping devices are required to be reduced, a multi-objective genetic algorithm is employed in this study. After numerical simulation, various optimal designs that can satisfy control performance requirement can be obtained by appropriately reducing the amount of structural material and additional smart damping device.

• Current Industrial and Technological Trends in Aerospace
• /
• v.5 no.1
• /
• pp.75-92
• /
• 2007

2002년 프론티어사업의 일환으로서, 10년간 1200억의 예산으로 미래형 신개념비행체 기술개발사업을 시작한 스마트무인기사업은, $2002{\sim}2003$년 수행한 개념연구를 통해 미래형 신개념 고속 수직이착륙 항공기 개념으로서 틸트로터 개념을 선정하고 이의 개발에 매진하고 있다. 사업단에서는 우선, 항공 선진국에서 지난 반세기 동안 시행한 다양한 비행체 개념연구결과에 대해 자체적인 비교 분석 및 국제공동 연구를 근간으로하여, 당시 틸트로터에 필적하는 가능성을 보였던 스탑트로터(보잉사), 복합자이로콥터(카터콥터사) 개념이 아닌, 틸트로터 비행체의 기술개발을 결정하게 되었다. 각각의 비행체 개념이 갖는 위험성과 도전성, 그리고 소요기술, 설계특성, 개발 위험도 등에 대한 면밀한 분석을 기초로 한 사업단의 체계적 의사결정은 주효했다. 스탑트로터개념은 비행시험의 잇단 실패와 지연/잠정 중단사태가 이어졌고, 복합자이로콥터 또한 잇단 비행사고로 2002년 기록한 148kts를 능가하는 고속성능 시현에 지금까지 실패함으로써, 실용화 가능한 고속수직이착륙기로서의 검증을 위해서는 해결해야할 기술적 과제가 많이 남아있음을 보여주고 있다. 반면, 틸트로터 개념의 경우 V-22의 설계 수정형에 대한 성공적인 비행시험완료 및 인증획득으로 전면양산승인이 2005년 결정되어 458대가 (미해병대(360), 해군(48), 공군(50)) 납품될 예정이고, 2010년 인증획득을 목표로 민수용으로 개발중인 BA609의 순조로운 비행시험진행, 무인기로 개발된 Eagle Eye 기술시현기의 비행 시험성공과 2003년 미 해양경찰청으로부터 Deep Water 프로그램의 장거리 순찰임무 주력기종 선정과 같이 군용, 상용, 무인용 고속 수직이착륙 시장의 전 방위적 진입이 현실화되고 있다. 이에 따라 항공업계의 반응은 2가지 방향으로 나뉘고 있다. 하나는 유럽의 ERICA 프로그램과 같이 틸트로터 기술 개발을 서두르자고 주장하는 방향이고, 다른 하나는 시콜스키의 X2 프로그램과 같이 틸트로터와는 차별화된 독자적인 고속 수 직이착륙 비행체 개념 개발을 시도하는 것이다. 이러한 배경으로 국내 독자적인 기술력으로 지난해까지 일구어낸 성공적인 스마트무인기 상세설계 종료 및 축소형 비행체 전환비행성공은 그 의의가 매우 크다고 할 수 있다. 본 논문은 틸트로터 개발사를 통해, 신개념 비행체 개발의 어려움과 교훈을 알아보고, 세계에서 2번째로 틸트로터 기술을 개발하고 있는 스마트무인기 사업의 현황과 기술적 특징 및 의의의 정리, 그리고 틸트로터의 대안으로 진행중인 새로운 고속 VTOL 비행체 연구현황에 대한 소개 와 간단한 기술적 평가를 포함시켰다.

• Proceedings of the Korean Information Science Society Conference
• /
• 2006.06b
• /
• pp.238-240
• /
• 2006

네트워크상에서 발생하는 다양한 형태의 대량의 데이터를 정확하고 효율적으로 분석하기 위해 설계되고 있는 마이닝 시스템들은 목표지향적으로 훈련데이터들을 어떻게 구축하여 다룰 것인지에 대한 문제보다는 대부분 얼마나 많은 데이터 마이닝 기법을 지원하고 이를 적용할 수 있는지 등의 기법에 초점을 두고 있다. 따라서, 점점 더 에이전트화, 분산화, 자동화 및 은닉화 되는 최근의 보안공격기법을 정확하게 탐지하기 위한 방법은 미흡한 실정이다. 본 연구에서는 유비쿼터스 환경 내에서 발생 가능한 문제 중 복잡하고 지능화된 침입패턴의 탐지를 위해 데이터 마이닝 기법과 결함허용방법을 이용하는 개선된 학습알고리즘과 후처리 방법에 의한 RTPID(Refinement Training and Post-processing for Intrusion Detection)시스템을 제안한다. 본 논문에서의 RTPID 시스템은 active learning과 post-processing을 이용하여, 네트워크 내에서 발생 가능한 침입형태들을 정확하고 효율적으로 다루어 분석하고 있다. 이는 기법에만 초점을 맞춘 기존의 데이터마이닝 분석을 개선하고 있으며, 특히 제안된 분석 프로세스를 진행하는 동안 능동학습방법의 장점을 수용하여 학습효과는 높이며 비용을 감소시킬 수 있는 자가학습방법(self learning)방법의 효과를 기대할 수 있다. 이는 관리자의 개입을 최소화하는 학습방법이면서 동시에 False Positive와 False Negative 의 오류를 매우 효율적으로 개선하는 방법으로 기대된다. 본 논문의 제안방법은 분석도구나 시스템에 의존하지 않기 때문에, 유사한 문제를 안고 있는 여러 분야의 네트웍 환경에 적용될 수 있다.더욱 높은성능을 가짐을 알 수 있다.의 각 노드의 전력이 위험할 때 에러 패킷을 발생하는 기법을 추가하였다. NS-2 시뮬레이터를 이용하여 실험을 한 결과, 제안한 기법이 AOMDV에 비해 경로 탐색 횟수가 최대 36.57% 까지 감소되었음을 알 수 있었다.의 작용보다 더 강력함을 시사하고 있다.TEX>로 최고값을 나타내었으며 그 후 감소하여 담금 10일에는 $1.61{\sim}2.34%$였다. 시험구간에는 KKR, SKR이 비교적 높은 값을 나타내었다. 무기질 함량은 발효기간이 경과할수록 증하였고 Ca는 $2.95{\sim}36.76$, Cu는 $0.01{\sim}0.14$, Fe는 $0.71{\sim}3.23$, K는 $110.89{\sim}517.33$, Mg는 $34.78{\sim}122.40$, Mn은 $0.56{\sim}5.98$, Na는 $0.19{\sim}14.36$, Zn은 $0.90{\sim}5.71ppm$을 나타내었으며, 시험구별로 보면 WNR, BNR구가 Na만 제외한 다른 무기성분 함량이 가장 높았다.O to reduce I/O cost by reusing data already present in the memory of other nodes. Finally, chunking and on-line compression mechanisms are included in both models. We demonstrate that we can obtain significantly high-performanc