• Applied Microscopy
• /
• v.40 no.3
• /
• pp.155-162
• /
• 2010

Bone is a hierarchically structured composite material which has been well studied by the materials engineering community because of its unique structure and mechanical properties. Bone is a laminated organic-inorganic composite composed of primarily hydroxyapatite, collagen and water. The main mineral that gives bone's hardness is calcium phosphate, which is also known as hydroxyapatite. Light microscopy (LM) and transmission electron microscopy (TEM) were used to study the structure of femurs from chicken and rabbit. The elemental analysis was used to search variation in the distribution of calcium, potassium and oxygen in the femur. Current investigation focused on two structural scales: micro scale (arrangement of compact bone) and nano scale (collagen fibril and apatite crystals). At micro scale, distinct difference was found in microstructures of chicken femur and rabbit femur. At nano scale, we analyzed the shape and size of apatite crystals and the arrangement of collagen fibril. Consequently, femurs of chicken and rabbit had very similar chemical property and structures at nano scale despite of their different species.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.15 no.3
• /
• pp.207-218
• /
• 2017

In this study, pitch-based activated carbon fibers (ACFs) were modified with pyrolysis fuel oil (PFO). Carbonized ACF samples were activated at $850^{\circ}C$, $880^{\circ}C$ and $900^{\circ}C$. A scanning electron microscope (SEM) and a BET surface area apparatus were employed to evaluate the indoor radon removal of each sample. Among three samples, the BET surface area and micropore area of ACF880 recorded the highest value with $1,420m^2{\cdot}g^{-1}$ and $1,270m^2{\cdot}g^{-1}$. Moreover, ACF880 had the lowest external surface area and BJH adsorption cumulative surface area of pores with $151m^2{\cdot}g^{-1}$ and $35.5m^2{\cdot}g^{-1}$. This indicates that satisfactory surface area depends on the appropriate temperature. With the above scope, ACF880 also achieved the highest radon absorption rate and speed in comparison to other samples. Therefore, we suggest that the optimum activation temperature for PFO containing ACFs is $880^{\circ}C$ for effective indoor radon adsorption.

• Investigative Magnetic Resonance Imaging
• /
• v.13 no.1
• /
• pp.40-46
• /
• 2009

Purpose : The purpose of this study was to investigate the quantitative evaluation of the corticospinal tract (CST) at the multiple levels by using functional MRI (fMRI) co-registered to diffusion tensor tractography (DTT). Materials and Methods : Ten normal subjects without any history of neurological disorder participated in this study. fMRI was performed at 1.5 T MR scanner using hand grasp-release movement paradigm. DTT was performed by using DtiStudio on the basis of fiber assignment continuous tracking algorithm (FACT). The seed region of interest (ROI) was drawn in the area of maximum fMRI activation during the motor task of hand grasp-release movement on a 2-D fractional anisotropy (FA) color map, and the target ROI was drawn in the cortiocospinal portion of anterior lower pons. We have drawn five ROIs for the measurement of FA and apparent diffusion coefficient (ADC) along the corona radiata (CR) down to the medulla. Results : The contralateral primary sensorimotor cortex (SM1) was mainly found to be activated in all subjects. DTT showed that tracts originated from SM1 and ran to the medulla along the known pathway of the CST. In all subjects, FA values of the CST were higher at the level of the midbrain and posterior limb of internal capsule (PLIC) than the level of others. Conclusion : Our study showed that co-registered fMRI and DTT has elucidated the state of CST on 3-D and analyzed the quantitative values of FA and ADC at the multiple levels. We conclude that co-registered fMRI and DTT may be applied as a useful tool for clarifying and investigating the state of CST in the patients with brain injury.

• The Korean Journal of Malacology
• /
• v.24 no.1
• /
• pp.41-50
• /
• 2008

The histochemical characteristics and ultrastructure of the mantle in the spiny top shell, Batillus cornutus were described using light and electron microscopy. The simple epidermal layer wrapped on the top and bottom of the centrally located connective tissue. And then the epidermal layer were divided into the outer epidermal layer near a shell and the inner epidermal layer closed to the visceral mass. The connective tissue layer was composed of the collagen fiber muscularfiber bundle and hemolymph sinus. Mucous cells in the apical mantle contained acid and neutral mucopolysaccaride, and acidic carboxylated mucopolysaccaride in the mid and marginal mantle. The mantle thickness, epidermal layer thickness and hemolymph sinus area displayed a trend of reduction from the marginal zone to the apical zone. From TEM observation, it was possible to distinguish epithelium, ciliated cell, absorptive cell and secretory cell in the epidermal layer. The epithelia were columnar and the nucleus was elliptical. The free surface were covered with microvilli. The lateral membranes of epithelium was con nected with neighboring cells by the zonular occludens, zonular adherens and membrane interdigitation. Ciliated cell on free surface had cilia and microvilli, and numerous mitochondria in the apical cytoplasm. In the epidermal layer, it observed 2 type cells having absorptive function. The absorptive cells were columnar in shape, and contained microvilli, pinocytotic vesicles, mitochondria and lysosomes of various electron density. Secretory cells can be divided into four types (A, B, C, D) depending on the cell shape and characteristics of secretory granules. These cells were unicellular glands and had similar characteristics to previously reported on the mantle of the gastropod and bivalves.

• Korean Journal of Plant Resources
• /
• v.21 no.1
• /
• pp.1-4
• /
• 2008

The clonal variation in female flowering was studied in Larix leptolepis clone bank, consisting of 116 clones, for three years. The between-year variation was large; i.e. the percentage of flowering grafts and average number of flowering per graft were $28.4{\sim}67.2$ and $9{\sim}176$, respectively. Differences in flowering abundance among clones were large and statistically significant in all the years studied. The variance of flowering abundance among clones was increased when flowering was poor. The average of broad-sense heritability of flowering abundance was 0.52. The genetic gain(%G) was estimated at 57.4% when the upper 30% clones were selected. The clonal stability of flowering abundance was compared using average number of flowering and coefficient of variance value of each clone. The clones such as Gyeonggi 9(29), Kangwon 37(137), Chungnam 6(46), Chungnam 14(414), R11, R8 showed abundant flowering and high stability.

• Journal of Conservation Science
• /
• v.23
• /
• pp.25-37
• /
• 2008

This study focuses on identification of mineralogical and geochemical characteristics and interpretation of raw material sources for prehistoric chlorite beads excavated from Geoseokri site in Boseong and Buntori site in Haenam, Korea. These prehistoric beads consist of three grayish blue ring-shaped beads, one dark green tubular bead and one greenish black tubular bead that show acicular-columnar and fibrous microtexture. The beads are composed of $SiO_2$, $Al_2O_3$, MgO and FeO as majors and a trace amount of $K_2O$, CaO and Na_2O$. Mineral species is mostly chlorite with a small amount of quartz and feldspar. Quantitative analysis indicates that the grayish blue ring-shaped beads and the dark green tubular bead belong to clinochlore and the greenish black tubular bead does to the boundary between clinochlore and sheridantie. Chlorite is a hydrous phyllosilicate mineral and it shows various microtexture of acicular, sheeted, earthy, granular andfibrous shapes. As its hardness is 2, chlorite is easily engraved due to its softness. It has aesthetic worthy as it shows green, black and greenish gray colors and pearly to greasy luster as well. These factors would lead to the extensive use of chloritic beads as ornaments from prehistoric times. Though the mineral sources of the chlorite beads can be found in central western region of Chungnam and Iwon of Hamnam, those areas are too distant from the two relic sites. Instead, chlorite ores commonly occur as altered products in wall rock alteration zone of every hydrothermal deposit. Therefore, it is probable that raw materials of chlorite were supplied from neighboring hydrothermal environment rather than far deposits. The result needs further study to verify raw material provenance interpretation, supply, manufacture and distribution on the basis of archaeological points of view.

• Journal of the Korean Wood Science and Technology
• /
• v.43 no.1
• /
• pp.122-134
• /
• 2015

This study was conducted to investigate the potential of torrefied larch wood as a raw material of pellets. First of all, larch chip was torrefied at the temperatures of 230, 250 and $270^{\circ}C$ for 30, 50 and 70 min. Secondly, moisture content, moisture absorption, higher heating value and ash content of the torrefied chip were measured to examine the effects of torrefaction conditions on the fuel characteristics of larch. Thirdly, surfaces of the torrefied chip were observed by light microscope (LM), field emission scanning microscope (FE-SEM) and SEM-energy dispersive spectroscopy (EDXS). With the increases of torrefied temperature and time, contents of lignin increased and those of hemicellulose reduced. Moisture content of torrefied larch chip was greatly lower than that of non-torrefied chip. Moisture absorption of the torrefied chip decreased as torrefaction temperature increased. As torrefaction temperature increased, higher heating value and ash content of larch chip increased. However, durability of torrefied-larch pellets was remarkably lower comparing to non-torrefied-larch pellets. When surface of larch chip was observed by LM and FE-SEM, surface color and cell wall of the chip was getting darker and more collapsed with the increases of torrefaction conditions. Through the analysis of SEM-EDXS, distribution and quantity of lignin existing on the surface of larch chip increased with the increases of torrefied conditions. In conclusion, $270^{\circ}C$/50 min might be an optimal condition for the torrefaction of larch with the aspect of fuel characteristics, but torrefaction condition of $230^{\circ}C$/30 min should be considered according to the durability of torrefied-larch pellets.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.58 no.4
• /
• pp.367-375
• /
• 2013

The rice bran, a by-product of rice milling process, is well known for various functional components, such as tocopherol, tocotrienol, ${\gamma}$-oryzanol, carrying antioxidant activities. This study was conducted to investigate the antioxidant components and antioxidant activities in rice bran of different Korean rice cultivars. The 8 isomers of vitamin E, ${\gamma}$-oryzanol, flavonoids, and polyphenolics in rice bran from 16 Korean premium and high quality rice cultivars were quantified. DPPH and ABTS radical scavenging activities and reducing power of the ethanol extracts of rice bran were measured. 'Hopum' showed the highest total vitamin E content, $221.47{\mu}g/g$ among the cultivars, and 'Hanseol' showed the lowest content. The rice bran showed different compositions of ${\alpha}-$, ${\beta}-$, ${\gamma}-$, ${\delta}-$ tocopherol and tocotrienol among rice cultivars. The antioxidant contents were also different by cultivar; the ${\gamma}$-oryzanol contents ranged from 1.99 mg/g (Unkwang) to 4.30 mg/g (Chilbo), the polyphenol contents ranged from 427.22 mg gallic acid eq./100 g (Odaebyeo) to 775.80 mg gallic acid eq./100 g (Hopum). 'Hopum' also had the highest DPPH and ABTS free radical scavenging activities, 9.82% and 187.5 AEAC mg/100 g, respectively. In vitro, the rice bran extracts from 'Hopum' had significantly higher antioxidant activities than that of other cultivars.

• Food Science and Preservation
• /
• v.20 no.3
• /
• pp.336-341
• /
• 2013

In this study, the proximate compositions, minerals, free amino acids, total polyphenol and flavonoids of figs were analyzed according to their cultivars. The proximate compositions showed moisture at 85.37~87.28%, crude ash at 0.38~0.43%, crude lipid at 0.20~0.26%, crude protein at 0.39~0.81%, carbohydrate at 11.23~13.66% and crude fiber at 5.12~7.55% (dry base). The amount of the following minerals in the figs were highest, in this order: K > Ca > Mg > Na. The total polyphenol contents were highest in this order: Dauphine (198.91~261.64 mg/kg), Banane (211.07 mg/kg) and Horaish (169.90~174.33 mg/kg). The total flavonoid contents were highest in this order: Banane (84.52 mg/kg) > Dauphine (60.47~68.71 mg/kg) > Horaish (44.12~44.60 mg/kg). The quercetin contents were highest in this order: Dauphine, 2.40~3.54 mg/kg; Banane, 3.54 mg/kg; and Horaish, 2.40~2.75 mg/kg; but the flavonoid contents were lowest in this order: Dauphine, 1.11~1.16 mg/kg; Banane, 1.14 mg/kg; and Horaish, 1.09~1.11 mg/kg. The free amino acid content of the figs was 199.70~328.77 mg/100 g; their essential free amino acid contents, 46.45~67.46 mg/100 g; and their GABA (${\gamma}$-aminobutyric acid) contents, 13.57~26.69 mg/100 g.

• Journal of Oral Medicine and Pain
• /
• v.34 no.4
• /
• pp.387-395
• /
• 2009

Nerve growth factor (NGF) and sensory neuropeptides are involved in the process of nociception at peripheral nerve fibers and wide spread in central nervous system. The aims of this study were to investigate NGF and sensory neuropeptides (substance P [SP] and calcitonin gene-related peptide [CGRP]) levels in human plasma and saliva, and the associations between these sensory neuropeptides levels and chronic orofacial pain symptoms. NGF, SP, and CGRP levels in plasma and resting whole saliva samples collected from 67 orofacial pain patients (joint pain, dental or periodontal pain, mucosal pain) and 36 pain free control subjects were measured by enzyme immunoassay. The characteristic pain intensity of each subject was measured using the Graded Chronic Pain Scale and the flow rate of resting whole saliva was measured. Joint pain patients group showed significantly higher plasma NGF level compared to each of dental pain patients (p<0.01), mucosal pain patients (p<0.01), and control group (p<0.01). Plasma NGF level of dental pain patients group was significantly higher than that of control group (p<0.01). Saliva SP level of dental pain patients group (p<0.05) and saliva CGRP level of mucosal pain group (p<0.05) were significantly higher than that of control group. Plasma and saliva SP levels of joint pain patients was significantly associated with pain intensity (plasma: standardized coefficient=0.599, p<0.01, saliva: standardized coefficient=0.504, p=0.05). In dental pain patients group, plasma SP (standardized coefficient=0.559, p<0.01), saliva SP (standardized coefficient=0.520, p<0.01) and saliva CGRP (standardized coefficient=0.599, p<0.01) levels were significantly associated with age. In mucosal pain patients group, plasma SP (standardized coefficient=0.495, p<0.05), saliva SP (standardized coefficient=0.500, p<0.05), and saliva CGRP (standardized coefficient=0.717, p<0.01) levels were significantly associated with age. NGF and neuropeptides may play a role in the maintenance of various orofacial pain symptoms. The examination of those levels in plasma and saliva helps understanding the mechanism of orofacial pain, and furthermore, can be applied to the diagnosis and therapy of orofacial pain.