• Proceedings of the Korean Fiber Society Conference
• /
• 1998.10a
• /
• pp.311-315
• /
• 1998

고분자 재료의 섬유 배향 상태는 각종 물성치의 지표가 되는 가장 기본적인 인자이므로 섬유 배향각 분포의 측진법을 확립하여 섬유 배향 상태를 밝혀두는 것은 재료 설계, 성형조건의 결정, 성형품의 역학적 특성 둥을 예측하는데 있어서 매우 중요하다. (중략)

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.22 no.6
• /
• pp.639-646
• /
• 2009

High-flow steel-fiber reinforced mortar may induce a certain fiber orientation distribution in the process of placing and thus have an influence on the tensile properties. In this paper, the variation of the fiber orientation distribution according to the flow of high-flow steel-fiber reinforced mortar was estimated in numerical simulation. The analytical results present that the major variation of fiber orientation distribution is made within 150mm of flow distance, thereafter the tendency of the fiber orientation distribution is not noticeable even though the peak of distribution density in the orientation parallel to the flow direction get bigger along the distance. Considering the close relation between the fiber orientation and the tensile behavior of composite, prediction of fiber orientation distribution make it possible to predict the variation in the tensile behavior of high-flow steel-fiber reinforced mortar according to the flow.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.04a
• /
• pp.1009-1012
• /
• 2008

The fiber dispersion performance in fiber-reinforced cementitious composites is a crucial factor with respect to achieving desired mechanical performance. However, evaluation of the fiber dispersion performance in the composite PVA-ECC(Polyvinyl alcohol-Engineered Cementitious Composite) is extremely challenging because of the low contrast of PVA fibers with the cement-based matrix. In the present work, an enhanced fiber detection technique is developed and demonstrated. Using a fluorescence technique on the PVA-ECC, PVA fibers are observed as green dots in the cross-section of the composite. After capturing the fluorescence image with a Charged Couple Device(CCD) camera through a microscope. The fibers are more accurately detected by employing a series of process based on a categorization, watershed segmentation, and morphological reconstruction.

• Journal of Power System Engineering
• /
• v.7 no.1
• /
• pp.25-33
• /
• 2003

섬유강화 복합재료의 계면 강도는 강화재와 메트릭스간의 계면특성, 강화용 섬유의 표면처리 및 섬유간의 거리 등에 많은 영향을 받는다. 본 연구에서는 섬유간의 거리가 섬유강화 복합재료의 계면특성에 미치는 영향을 고찰하기 위해, E glass fiber/epoxy 복합재료의 시험편을 제작하고, 섬유의 표면처리 및 섬유파괴가 이웃하는 섬유파괴에 영향을 미치는 거리에 대해 고찰하였다. E glass fiber/epoxy 복합재료의 계면 전단강도는 섬유간 거리 $0{\sim}50{\mu}m$ 사이에서는 섬유의 표면처리와는 관계없이 섬유간 거리가 증가할수록 증가하였고, 섬유간 거리 $50{\mu}m$ 이상에서는 섬유간거리에 관계없이 계면전단강도는 일정하였다.

• Geotechnical Engineering
• /
• v.11 no.2
• /
• pp.107-120
• /
• 1995

The purpose of this study is to investigate the effects of fiber on engineering properties of Fiber-Reinforced Soil. Engineering properties of soil reinforced with discrete randomly oriented inclusion depend on soil density, particle size, grading, fiber length, tensile strength and stiffness of fiber, mixing ration of fiber, confining stress, etc.. in this paper, the influence of fiber shape, fiber length, fiber diameter, fiber content, cement content and curing duration on engineering characteristics(compaction, shear & permeability) were evaluated for typical soils produced from construction works through uniaxial compression tests and triaxial compression tests. From the experimental results, it was also investigated if there is an optimal range of fiber lengths and fiber contents for the tested soils and tested mono-filament fibers.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.168-168
• /
• 2013

도전성 섬유(Conductive textile)는 섬유자체의 고유 특성을 유지하면서 전기적인 도전 특성을 갖는 섬유로서, Cu, Ag, Ni 등의 전기전도성이 높은 금속 박막을 증착하여 제작하고 있다. 그러나, 이러한 금속은 공기 중의 산소와 결합하여 쉽게 산화되는 특성을 지니고 있기 때문에 사용 중에 산화되어 도전 특성이 감소하는 단점이 있다. TiN은 금속 못지않은 높은 전기전도성을 지니고 있을 뿐만 아니라, 금속에 비하여 높은 경도에 따른 우수한 내마모 특성, 내부식성 및 낮은 마찰계수를 지니고 있다. 그러나, TiN은 경도가 높기 때문에 섬유의 고유 특성인 유연성이 저하되는 문제가 있다. 본 연구에서는 면(Cotton), PE (Polyester), PP (Polypropylene) 등의 섬유 위에 TiN 박막을 증착하여, 섬유의 유연성을 유지하며 전기전도성과 내마모 특성이 우수한 도전성 섬유를 제작하고자 하였다. TiN 박막 증착을 위하여 ICP-assisted pulsed-DC reactive magnetron sputtering 장비를 사용하였으며, Ar:N2 유량비(Flow rate), Ti 타겟 power, ICP RF power 등을 변화시켜 Ti와 N의 조성비를 조절하였고, 이를 통하여 섬유의 휨이나 접힘에도 도전 특성이 변하지 않고 내마모 특성이 우수한 TiN 박막을 증착하였다. TiN 박막이 증착된 섬유의 전기전도도는 일정한 압력 하에 전기전도도를 측정할 수 있는 장치를 제작하여 측정하였으며, 표면 조성 분포 및 접합력 측정을 위하여 XPS (X-ray Photoelectron Spectroscopy)와 Peel-tester를 이용하였다.

• Applied Microscopy
• /
• v.31 no.1
• /
• pp.49-57
• /
• 2001

In this study, the distribution of lectin receptors in culutured fibroblast was explored using colloidal gold label complexed with lectin WGA purified from wheat germ (Triticum vulgare). The lectin WGA gold complex, shown to recognize GlcNAc (N-acetylgalactosamine) and NeuNAc (N-acetylneuraminic acid) regions, was applied to detect binding sites in Lowicryl HM 20 sections viewed under electron microscope Labeled sections of the culutured fibroblast revealed gold particles specifically distributed on the cytoplasm and cell surface of the fibroblast. Labeling of 24 hours culutured fibroblast was then quantified and compared to that of 72 hours culutured fibroblast. 24 hours culutured fibroblast sections resulted in specific gold particle distribution on the cytoplasmic vesicle of the culutured fibroblast. These results indicate that lectin WGA receptors are located in the cytoplasmic vesicle and cell surface of the 24 hours culutured fibroblast, and on the cell surface of the 72 hours culutured fibroblast. Therefore, the GlcNAc and NeuNAc regions on the cell surface appear to be functionally associated with cell-recognition and protection from other cell of the tissue, and linked with secretion and exocytosis of the fibroblast cytoplasm.

• Proceedings of the Korean Fiber Society Conference
• /
• 1998.04a
• /
• pp.166-172
• /
• 1998

일반적으로 방적공정은 원료섬유를 평행화하여 섬유간의 결속력을 부여하기 위해 꼬임수단을 통하여 일축방향으로 연속적인 섬유집합체를 형성하는 공정을 말한다. 따라서 꼬임 부가방식에 따라 꼬임의 분포와 균제도 및 구성섬유의 배향도가 달라지게 되며 그 결과 방적사의 구조특성이 달라지고 최종방적사의 물리적 성질을 결정하게 된다.(중략)

• Proceedings of the Korea Concrete Institute Conference
• /
• 2009.05a
• /
• pp.491-492
• /
• 2009

This paper presents evaluation results of fiber dispersion, number of fibers in a unit area, fiber orientation according to the mix-proportion of ECC and bridging stress calculated on the basis of fiber distribution characteristics.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2009.05a
• /
• pp.531-532
• /
• 2009

This paper presents crack spacing which quantitatively considers the fiber distribution and prediction of uniaxial tensile behavior of ECC on the basis of crack spacing and fiber distribution. The predictions exhibit similar tensile stess-strain curves to the test results within 10% error.