• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.34 no.4
• /
• pp.22-29
• /
• 2002

This research was conducted to investigate the morphological characteristics of fine fibers produced during beating process of high yield pulp treated with ozone and the distribution of lignin in the produced fine fibers. Thermomechanical(TMP) pulp and chemithermomechanical(CTMP) pulp of spruce and CTMP of white birch were beaten to reach 200$m\ell$ CSF, and then the fine fibers were observed using ultraviolet microscope. The fine fibers produced from TMP and CTMP of spruce using treated with ozone for 15 minutes were fragments of fiber surfaces or cell corners, and most of them contained lignin. However, lignin was not observed in the fibers after 15 minutes of ozone treatment. The fine fibers produced from CTMP of white birch were broken pieces or fragments of fiber surfaces or cell corners. The lignin was observed in the fibers until 5min of ozone treatment but no lignin was observed after 5 minutes of ozone treatment. Different morphological characteristics of TMP and CTMP explained both the different morphological characteristics and the distribution of lignin observed in the fine fibers produced from the beating process of TMP and CTMP treated with ozone.

• Korean Journal of Agricultural Science
• /
• v.3 no.2
• /
• pp.225-234
• /
• 1976

To elucidate ${\beta}$-glucosidase formation on various carbon scurces by cellulolytic bact-eia, Cellulomonas sp. CS1-1, the strain was grown on Nutrient Yeast Broth, carboxymethyl cellulose, avicel and cellobiose using a Ouickfit FVIL fermentor operated in batch, and the growth characteristics on those substrates and ${\beta}$-glucosidase distribution of extra and intracellular enzyme components were studied. The results were: 1) ${\beta}$-glucosidase was always intracellular, and was formed under all growth conditions tested, ii) but levels of relative activities were higher when the culture was grown on cellobiose and on avicel, iii) the relative activities were always maximum during the growth phase of the organism irrespective of the substrate used.

• Journal of the Korean Wood Science and Technology
• /
• v.25 no.2
• /
• pp.75-80
• /
• 1997

This research has been examined to measure the degree of the fiber damage of ozonenation high yield pulp in the beating process. Ozone treated the TMP(Thermomechanical Pulp) and CTMP(Chemithermomechanical Pulp) of spruce and the CTMP of birch has been beaten to be reached 200ml(freeness) of its content. It had been studied the forming of fiber distribution by treatment for long fiber, short fiber, fine with the above method. As ozone treatment time gets longer, the pulp has showed the tendency of increasing the fiber content of 28, 48mesh. Ozone treated fiber has been increased long fiber content by being added softness. By given longer ozone treatment time, the TMP and CTMP of spruce has showed the decreasing of fiber content. On the contrary, CTMP of birch has showed the increasing its fiber content. It had proved that the results of difference are rather closer to the species of tree than closer to the kinds of pulp. The fiber content of over 200mesh which has created in beating process demonstrates the decreasing of its fiber content by getting longer ozone treatment time. The softness of fiber can be extracted by the lignin of fiber surface that had been formed by ozone treatment. Thus we assume that the fiber in the process of beating obtains less physical damage.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.10 no.1
• /
• pp.106-114
• /
• 2006

Uses of geosynthetics as a reinforcing material for earth structures have ever increased due to their excellent economy. fine external appearance. and easy construction. In the current practice of geosynthetics. however, the lacks of the standardized method of evaluating the soil/geosynthetics friction properties and the inconsistency of conventional design methods develop confusion to the civil engineers. The purpose of site monitoring of the retaining wall reinforced by geogrids was to evaluate the applicability of existing design methods to, and performance of. CHAMSTONE wall system. Full scale field performance during and after construction was monitored by incorporating instrumentation including strain gauges on the geogrid and soil pressure cells. The difference of the reinforcing effects of geosynthetics embedded in the soil will be also investigated by comparing of the line and curve types of retaining wall reinforced by geogrids with block type facings.

• Journal of Life Science
• /
• v.32 no.12
• /
• pp.1005-1012
• /
• 2022

This study was conducted to investigate the taxonomic composition and diversity of fecal microbiota between birth and weaning stages of Halla horses using 16S rRNA gene amplicon sequencing analysis. Proteobacteria (35.7%) and Firmicutes (45.6%) were identified as the most common phylum in birth and weaning, respectively. Escherichia (19.7%) and Clostridium (14.0%) were observed as the most dominant genus in birth, and Fibrobacter (6.6%) was the highest in weaning. The results of α-diversity showed that the richness and evenness in microbial communities were statistically significant (p<0.001) in birth and weaning. The results of β-diversity indicated that the birth and weaning stages were clearly divided into two groups at the genus and species levels. Permutational multivariate analysis of variance (PERMANOVA) showed that the microbiota composition differences between birth and weaning were statistically significant (q<0.001). A linear discriminant analysis effect (LEfSe) was performed to select taxonomic makers between the birth and weaning stages. On the genus level, Escherichia, Bacteroides, Clostridium, and Methylobacterium were relatively abundant at birth, whereas Fibrobacter was more abundant at weaning. We expect that this research can be utilized as basic data in the identification of microbial communities involved in disease prevention and nutrient absorption in Halla horses.

• Korean Journal of Soil Science and Fertilizer
• /
• v.19 no.3
• /
• pp.187-194
• /
• 1986

Present stadies were carried out to obtain fundermental data for effective management of the soils by investigating the physicochemical characteristics rubber fiber, humification grade and bearing power of peats and muck which were included in Geongdeog series, and Gimje series in Honam area. The results abtained were as follows; 1. Humification grade of peats were about 23, while that of muck soils was about 45-71 and those were higher in Gimje series than Bongnam series. 2. The organic tiers which humification grade was higher were high pH, bulk density, and contents of K, $P_2O_5$, B.S and while were low OM, T-C, T-N, Na, $SiO_2$ and rubbed fiber. 3. In peats and mucks, bulk density, pH, contents of T-N $P_2O_5$ and ash were negatively correlated with rubbed fiber and OM, CEC, T-C, PAC, C/N, C/P were positively correlated with one, while these physicochemical characteristics were oppositely correlated with humification grade. 4. Cone bearing power of each soil tiers was low in every Geongdeog series which had the thick organic tiers and showed poorly drainage and it was the highest in Gimje series which was similar to in organic soils because of its thin organic tiers.

• Korean Journal of Food Science and Technology
• /
• v.54 no.4
• /
• pp.377-385
• /
• 2022

This study examined the dietary fiber content of potato and physicochemical characteristics of potato starch isolated from various cultivars. The total dietary fiber content of the Arirang1ho cultivar was 6.30%, which was higher than that of other cultivars. The amylose content ranged from 36.76-55.75%, with Sooseon having the highest amylose content. Analysis of the degree of amylopectin polymerization revealed that all cultivars had a high proportion of DP (degree of polymerization) 13-24. The phosphate content ranged from 45.90-84.23 mg/100 g, with Arirang1ho having the highest and Eunseon having the lowest phosphate content. The resistant starch content ranged from 58.94-79.87%. Geumseon showed the highest breakdown in the range of 587.45-1,129.72 RVU (rapid viscosity unit). Sooseon had the lowest gelatinization enthalpy value for potato starch in the range of 5.54-7.64 J/g. These results provide basic data for the use of potatoes in industrial applications.

• Applied Microscopy
• /
• v.35 no.2
• /
• pp.89-96
• /
• 2005

The ultrastructures of the fertilized egg envelope from Hyphessobrycon serpae belonging to Characidae was studied using scanning and transmission electron microscopes to get systematic fundamental data for classification of species and to confirm whether micropyle is a common trait of Characidae or not. The fertilized egg was of colorless, transparent, spherical, adhesive and demersal type. There were not oil droplets in vitelline membrane and attached structures in the outside of fertilize egg envelope. The egg envelope had a single micropyle resembling the pathway of sperm in the area of the animal pole. The micropyle was surrounded by 13 to 15 protruded lines of the egg envelope in a radiated form. The outer surface of fertilized egg envelope was covered by reticular adhesive fibrous structures and irregularly arranged by pore canals. The fertilized egg envelope consisted of three distinct layers an outer adhesive fibrous layer with high electron density, a middle layer with pore canals, and an inner layer consisting of 6 to 7 lamellae alternating layers with interlamellae of lower electron density. These ultrastructural characters of fertilized egg envelope form Hyphessobrycon serpae can be utilized in taxonomy of teleost, and as fundamental data for study on early development of fertilized egg. It seems that the morphology of micropyle is a common trait of Characidae

• Journal of the Korean Wood Science and Technology
• /
• v.45 no.3
• /
• pp.288-296
• /
• 2017

In this study, the effect of spray-drying conditions and surfactant addition on the spray-drying yield, morphological characterization, size distribution and re-dispersity in water of spray-dried lignocellulose nanofibril (LCNF) were investigated. The freeze-dried LCNF after solvent exchange had linear fiber morphology with a diameter of 70-300 nm, and the spray-dried LCNF showed rod-like particle morphology. The spray-drying yield and particle size of spary-dried LCNF at $140^{\circ}C$ was highest and smallest, respectively. As LCNF concentration and blowing rate decreased and increased, respectively, the spray-drying yield and particle size were increased. The highest spray-drying yield was found at distearyl dimethyl ammonium chloride (DDAC) addition of 10 phr at $140^{\circ}C$. As the particle size decreased and the DDAC content increased, filtration time of spray-dried LCNF in water was decreased and increased, respectively.

• Korean Journal of Food Science and Technology
• /
• v.49 no.6
• /
• pp.638-643
• /
• 2017

In this study, the approximate compositions, color properties, texture properties, physical characteristics, and sensory evaluation of muffins prepared from legumes (mung bean, cowpea, chickpea, or lentil) and wheat flour blends was evaluated. Pasting viscosity of legume flours was lower than that of wheat flour. The moisture, crude ash, and crude protein content of muffins made with legume-wheat flour blends were higher than those of control muffins made exclusively with wheat flour. The lightness value of muffins was decreased by adding legume flour. The hardness of muffins made from legume-wheat flour blends was higher than that of control, whereas springiness and cohesiveness was lower. The weight of muffins made with legume-wheat flour blends were higher than that of control, whereas the height and volume were lower than those of control. The scores of taste, aroma, and texture of muffins were not significantly changed by adding legume flours. The overall acceptability of muffins that were made with lentil or chickpea flour was similar to that of control muffins.